mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Hariprasad Kelam <hkelam@marvell.com>
To: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <kuba@kernel.org>, <davem@davemloft.net>, <sgoutham@marvell.com>,
	<gakula@marvell.com>, <jerinj@marvell.com>,
	<lcherian@marvell.com>, <sbhatta@marvell.com>,
	<hkelam@marvell.com>, <naveenm@marvell.com>,
	<edumazet@google.com>, <pabeni@redhat.com>
Subject: [net 2/2] octeontx2-af: Update RSS algorithm index
Date: Fri, 8 Dec 2023 12:26:10 +0530	[thread overview]
Message-ID: <20231208065610.16086-3-hkelam@marvell.com> (raw)
In-Reply-To: <20231208065610.16086-1-hkelam@marvell.com>

The RSS flow algorithm is not set up correctly for promiscuous or all
multi MCAM entries. This has an impact on flow distribution.

This patch fixes the issue by updating flow algorithm index in above
mentioned MCAM entries.

Fixes: 967db3529eca ("octeontx2-af: add support for multicast/promisc packet replication feature")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
---
 .../ethernet/marvell/octeontx2/af/rvu_npc.c   | 55 +++++++++++++++----
 1 file changed, 44 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
index f65805860c8d..0bcf3e559280 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
@@ -671,6 +671,7 @@ void rvu_npc_install_promisc_entry(struct rvu *rvu, u16 pcifunc,
 	int blkaddr, ucast_idx, index;
 	struct nix_rx_action action = { 0 };
 	u64 relaxed_mask;
+	u8 flow_key_alg;
 
 	if (!hw->cap.nix_rx_multicast && is_cgx_vf(rvu, pcifunc))
 		return;
@@ -701,6 +702,8 @@ void rvu_npc_install_promisc_entry(struct rvu *rvu, u16 pcifunc,
 		action.op = NIX_RX_ACTIONOP_UCAST;
 	}
 
+	flow_key_alg = action.flow_key_alg;
+
 	/* RX_ACTION set to MCAST for CGX PF's */
 	if (hw->cap.nix_rx_multicast && pfvf->use_mce_list &&
 	    is_pf_cgxmapped(rvu, rvu_get_pf(pcifunc))) {
@@ -740,7 +743,7 @@ void rvu_npc_install_promisc_entry(struct rvu *rvu, u16 pcifunc,
 	req.vf = pcifunc;
 	req.index = action.index;
 	req.match_id = action.match_id;
-	req.flow_key_alg = action.flow_key_alg;
+	req.flow_key_alg = flow_key_alg;
 
 	rvu_mbox_handler_npc_install_flow(rvu, &req, &rsp);
 }
@@ -854,6 +857,7 @@ void rvu_npc_install_allmulti_entry(struct rvu *rvu, u16 pcifunc, int nixlf,
 	u8 mac_addr[ETH_ALEN] = { 0 };
 	struct nix_rx_action action = { 0 };
 	struct rvu_pfvf *pfvf;
+	u8 flow_key_alg;
 	u16 vf_func;
 
 	/* Only CGX PF/VF can add allmulticast entry */
@@ -888,6 +892,7 @@ void rvu_npc_install_allmulti_entry(struct rvu *rvu, u16 pcifunc, int nixlf,
 		*(u64 *)&action = npc_get_mcam_action(rvu, mcam,
 							blkaddr, ucast_idx);
 
+	flow_key_alg = action.flow_key_alg;
 	if (action.op != NIX_RX_ACTIONOP_RSS) {
 		*(u64 *)&action = 0;
 		action.op = NIX_RX_ACTIONOP_UCAST;
@@ -924,7 +929,7 @@ void rvu_npc_install_allmulti_entry(struct rvu *rvu, u16 pcifunc, int nixlf,
 	req.vf = pcifunc | vf_func;
 	req.index = action.index;
 	req.match_id = action.match_id;
-	req.flow_key_alg = action.flow_key_alg;
+	req.flow_key_alg = flow_key_alg;
 
 	rvu_mbox_handler_npc_install_flow(rvu, &req, &rsp);
 }
@@ -990,11 +995,38 @@ static void npc_update_vf_flow_entry(struct rvu *rvu, struct npc_mcam *mcam,
 	mutex_unlock(&mcam->lock);
 }
 
+static void npc_update_rx_action_with_alg_idx(struct rvu *rvu, struct nix_rx_action action,
+					      struct rvu_pfvf *pfvf, int mcam_index, int blkaddr,
+					      int alg_idx)
+
+{
+	struct npc_mcam *mcam = &rvu->hw->mcam;
+	struct rvu_hwinfo *hw = rvu->hw;
+	int bank, op_rss;
+
+	if (!is_mcam_entry_enabled(rvu, mcam, blkaddr, mcam_index))
+		return;
+
+	op_rss = (!hw->cap.nix_rx_multicast || !pfvf->use_mce_list);
+
+	bank = npc_get_bank(mcam, mcam_index);
+	mcam_index &= (mcam->banksize - 1);
+
+	/* If Rx action is MCAST update only RSS algorithm index */
+	if (!op_rss) {
+		*(u64 *)&action = rvu_read64(rvu, blkaddr,
+				NPC_AF_MCAMEX_BANKX_ACTION(mcam_index, bank));
+
+		action.flow_key_alg = alg_idx;
+	}
+	rvu_write64(rvu, blkaddr,
+		    NPC_AF_MCAMEX_BANKX_ACTION(mcam_index, bank), *(u64 *)&action);
+}
+
 void rvu_npc_update_flowkey_alg_idx(struct rvu *rvu, u16 pcifunc, int nixlf,
 				    int group, int alg_idx, int mcam_index)
 {
 	struct npc_mcam *mcam = &rvu->hw->mcam;
-	struct rvu_hwinfo *hw = rvu->hw;
 	struct nix_rx_action action;
 	int blkaddr, index, bank;
 	struct rvu_pfvf *pfvf;
@@ -1050,15 +1082,16 @@ void rvu_npc_update_flowkey_alg_idx(struct rvu *rvu, u16 pcifunc, int nixlf,
 	/* If PF's promiscuous entry is enabled,
 	 * Set RSS action for that entry as well
 	 */
-	if ((!hw->cap.nix_rx_multicast || !pfvf->use_mce_list) &&
-	    is_mcam_entry_enabled(rvu, mcam, blkaddr, index)) {
-		bank = npc_get_bank(mcam, index);
-		index &= (mcam->banksize - 1);
+	npc_update_rx_action_with_alg_idx(rvu, action, pfvf, index, blkaddr,
+					  alg_idx);
 
-		rvu_write64(rvu, blkaddr,
-			    NPC_AF_MCAMEX_BANKX_ACTION(index, bank),
-			    *(u64 *)&action);
-	}
+	index = npc_get_nixlf_mcam_index(mcam, pcifunc,
+					 nixlf, NIXLF_ALLMULTI_ENTRY);
+	/* If PF's allmulti  entry is enabled,
+	 * Set RSS action for that entry as well
+	 */
+	npc_update_rx_action_with_alg_idx(rvu, action, pfvf, index, blkaddr,
+					  alg_idx);
 }
 
 void npc_enadis_default_mce_entry(struct rvu *rvu, u16 pcifunc,
-- 
2.17.1


  parent reply	other threads:[~2023-12-08  6:56 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-08  6:56 [net 0/2] octeontx2: Fix issues with promisc/allmulti mode Hariprasad Kelam
2023-12-08  6:56 ` [net 1/2] octeontx2-pf: Fix promisc mcam entry action Hariprasad Kelam
2023-12-08  6:56 ` Hariprasad Kelam [this message]
2023-12-11 10:10 ` [net 0/2] octeontx2: Fix issues with promisc/allmulti mode patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231208065610.16086-3-hkelam@marvell.com \
    --to=hkelam@marvell.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=gakula@marvell.com \
    --cc=jerinj@marvell.com \
    --cc=kuba@kernel.org \
    --cc=lcherian@marvell.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=naveenm@marvell.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=sbhatta@marvell.com \
    --cc=sgoutham@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®