[PATCH 4/4] arm64: dts: imx8mq-evk: add host-wake-gpio property for pci bus

[Sherry Sun <sherry.sun@nxp.com>]

The host wake pin is a standard feature in the PCIe bus specification,
so we add this property under PCI dts node to enable the host wake
function.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 7507548cdb16..ac824046c594 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -367,6 +367,7 @@ &pcie1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie1>;
 	reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	host-wake-gpio = <&gpio5 11 GPIO_ACTIVE_LOW>;
 	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
 		 <&pcie0_refclk>,
 		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
@@ -545,6 +546,7 @@ pinctrl_pcie1: pcie1grp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_I2C4_SDA_PCIE2_CLKREQ_B		0x76
 			MX8MQ_IOMUXC_ECSPI2_MISO_GPIO5_IO12		0x16
+			MX8MQ_IOMUXC_ECSPI2_MOSI_GPIO5_IO11		0x41
 		>;
 	};
 
-- 
2.34.1