From: Vignesh Raghavendra <vigneshr@ti.com>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 3/3] arm64: dts: ti: k3-am6*: Add additional regs for DMA components
Date: Tue, 12 Dec 2023 16:46:34 +0530 [thread overview]
Message-ID: <20231212111634.3515175-4-vigneshr@ti.com> (raw)
In-Reply-To: <20231212111634.3515175-1-vigneshr@ti.com>
Add additional reg properties for BCDMA and PKTDMA nodes which are
mostly used by bootloader components before Device Manager firmware
services are available, in order to setup DMA transfers.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 18 ++++++++++++++----
arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 18 ++++++++++++++----
arch/arm64/boot/dts/ti/k3-am62p-main.dtsi | 18 ++++++++++++++----
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 18 ++++++++++++++----
4 files changed, 56 insertions(+), 16 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index e5c64c86d1d5..4514a140ad38 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -121,8 +121,13 @@ main_bcdma: dma-controller@485c0100 {
<0x00 0x4c000000 0x00 0x20000>,
<0x00 0x4a820000 0x00 0x20000>,
<0x00 0x4aa40000 0x00 0x20000>,
- <0x00 0x4bc00000 0x00 0x100000>;
- reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+ <0x00 0x4bc00000 0x00 0x100000>,
+ <0x00 0x48600000 0x00 0x8000>,
+ <0x00 0x484a4000 0x00 0x2000>,
+ <0x00 0x484c2000 0x00 0x2000>,
+ <0x00 0x48420000 0x00 0x2000>;
+ reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+ "ring", "tchan", "rchan", "bchan";
msi-parent = <&inta_main_dmss>;
#dma-cells = <3>;
@@ -138,8 +143,13 @@ main_pktdma: dma-controller@485c0000 {
reg = <0x00 0x485c0000 0x00 0x100>,
<0x00 0x4a800000 0x00 0x20000>,
<0x00 0x4aa00000 0x00 0x40000>,
- <0x00 0x4b800000 0x00 0x400000>;
- reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+ <0x00 0x4b800000 0x00 0x400000>,
+ <0x00 0x485e0000 0x00 0x20000>,
+ <0x00 0x484a0000 0x00 0x4000>,
+ <0x00 0x484c0000 0x00 0x2000>,
+ <0x00 0x48430000 0x00 0x4000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+ "ring", "tchan", "rchan", "rflow";
msi-parent = <&inta_main_dmss>;
#dma-cells = <2>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index 4ae7fdc5221b..36947d9d644d 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -101,8 +101,13 @@ main_bcdma: dma-controller@485c0100 {
<0x00 0x4c000000 0x00 0x20000>,
<0x00 0x4a820000 0x00 0x20000>,
<0x00 0x4aa40000 0x00 0x20000>,
- <0x00 0x4bc00000 0x00 0x100000>;
- reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+ <0x00 0x4bc00000 0x00 0x100000>,
+ <0x00 0x48600000 0x00 0x8000>,
+ <0x00 0x484a4000 0x00 0x2000>,
+ <0x00 0x484c2000 0x00 0x2000>,
+ <0x00 0x48420000 0x00 0x2000>;
+ reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+ "ring", "tchan", "rchan", "bchan";
msi-parent = <&inta_main_dmss>;
#dma-cells = <3>;
ti,sci = <&dmsc>;
@@ -117,8 +122,13 @@ main_pktdma: dma-controller@485c0000 {
reg = <0x00 0x485c0000 0x00 0x100>,
<0x00 0x4a800000 0x00 0x20000>,
<0x00 0x4aa00000 0x00 0x40000>,
- <0x00 0x4b800000 0x00 0x400000>;
- reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+ <0x00 0x4b800000 0x00 0x400000>,
+ <0x00 0x485e0000 0x00 0x20000>,
+ <0x00 0x484a0000 0x00 0x4000>,
+ <0x00 0x484c0000 0x00 0x2000>,
+ <0x00 0x48430000 0x00 0x4000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+ "ring", "tchan", "rchan", "rflow";
msi-parent = <&inta_main_dmss>;
#dma-cells = <2>;
ti,sci = <&dmsc>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
index 963758c7d377..21981489b4db 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
@@ -101,8 +101,13 @@ main_bcdma: dma-controller@485c0100 {
<0x00 0x4c000000 0x00 0x20000>,
<0x00 0x4a820000 0x00 0x20000>,
<0x00 0x4aa40000 0x00 0x20000>,
- <0x00 0x4bc00000 0x00 0x100000>;
- reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+ <0x00 0x4bc00000 0x00 0x100000>,
+ <0x00 0x48600000 0x00 0x8000>,
+ <0x00 0x484a4000 0x00 0x2000>,
+ <0x00 0x484c2000 0x00 0x2000>,
+ <0x00 0x48420000 0x00 0x2000>;
+ reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+ "ring", "tchan", "rchan", "bchan";
msi-parent = <&inta_main_dmss>;
#dma-cells = <3>;
@@ -119,8 +124,13 @@ main_pktdma: dma-controller@485c0000 {
reg = <0x00 0x485c0000 0x00 0x100>,
<0x00 0x4a800000 0x00 0x20000>,
<0x00 0x4aa00000 0x00 0x40000>,
- <0x00 0x4b800000 0x00 0x400000>;
- reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+ <0x00 0x4b800000 0x00 0x400000>,
+ <0x00 0x485e0000 0x00 0x20000>,
+ <0x00 0x484a0000 0x00 0x4000>,
+ <0x00 0x484c0000 0x00 0x2000>,
+ <0x00 0x48430000 0x00 0x4000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+ "ring", "tchan", "rchan", "rflow";
msi-parent = <&inta_main_dmss>;
#dma-cells = <2>;
bootph-all;
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index 0be642bc1b86..bcdfd61c7d98 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -138,8 +138,13 @@ main_bcdma: dma-controller@485c0100 {
<0x00 0x4c000000 0x00 0x20000>,
<0x00 0x4a820000 0x00 0x20000>,
<0x00 0x4aa40000 0x00 0x20000>,
- <0x00 0x4bc00000 0x00 0x100000>;
- reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+ <0x00 0x4bc00000 0x00 0x100000>,
+ <0x00 0x48600000 0x00 0x8000>,
+ <0x00 0x484a4000 0x00 0x2000>,
+ <0x00 0x484c2000 0x00 0x2000>,
+ <0x00 0x48420000 0x00 0x2000>;
+ reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+ "ring", "tchan", "rchan", "bchan";
msi-parent = <&inta_main_dmss>;
#dma-cells = <3>;
@@ -155,8 +160,13 @@ main_pktdma: dma-controller@485c0000 {
reg = <0x00 0x485c0000 0x00 0x100>,
<0x00 0x4a800000 0x00 0x20000>,
<0x00 0x4aa00000 0x00 0x40000>,
- <0x00 0x4b800000 0x00 0x400000>;
- reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+ <0x00 0x4b800000 0x00 0x400000>,
+ <0x00 0x485e0000 0x00 0x20000>,
+ <0x00 0x484a0000 0x00 0x4000>,
+ <0x00 0x484c0000 0x00 0x2000>,
+ <0x00 0x48430000 0x00 0x4000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+ "ring", "tchan", "rchan", "rflow";
msi-parent = <&inta_main_dmss>;
#dma-cells = <2>;
--
2.43.0
next prev parent reply other threads:[~2023-12-12 11:17 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-12 11:16 [PATCH 0/3] arm64: dts: ti: k3: Add additioal " Vignesh Raghavendra
2023-12-12 11:16 ` [PATCH 1/3] arm64: dts: ti: k3-am65: Add additional " Vignesh Raghavendra
2023-12-13 9:46 ` Jai Luthra
2023-12-12 11:16 ` [PATCH 2/3] arm64: dts: ti: k3-j7*: " Vignesh Raghavendra
2023-12-13 9:55 ` Jai Luthra
2023-12-12 11:16 ` Vignesh Raghavendra [this message]
2023-12-13 9:39 ` [PATCH 3/3] arm64: dts: ti: k3-am6*: " Jai Luthra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231212111634.3515175-4-vigneshr@ti.com \
--to=vigneshr@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®