From: Vignesh Raghavendra <vigneshr@ti.com>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<j-luthra@ti.com>
Subject: [PATCH v2 2/3] arm64: dts: ti: k3-j7*: Add additional regs for DMA components
Date: Wed, 13 Dec 2023 19:21:37 +0530 [thread overview]
Message-ID: <20231213135138.929517-3-vigneshr@ti.com> (raw)
In-Reply-To: <20231213135138.929517-1-vigneshr@ti.com>
From: Manorit Chawdhry <m-chawdhry@ti.com>
Add additional reg properties for UDMA and RingAcc nodes which are
mostly used by bootloader components before Device Manager firmware
services are available, in order to setup DMA transfers.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 8 ++++++--
arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 8 ++++++--
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 8 ++++++--
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 8 ++++++--
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 8 ++++++--
arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 8 ++++++--
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 8 ++++++--
arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 8 ++++++--
8 files changed, 48 insertions(+), 16 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 264913f83287..b8424994ac5f 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -281,8 +281,12 @@ main_udmap: dma-controller@31150000 {
compatible = "ti,j721e-navss-main-udmap";
reg = <0x00 0x31150000 0x00 0x100>,
<0x00 0x34000000 0x00 0x100000>,
- <0x00 0x35000000 0x00 0x100000>;
- reg-names = "gcfg", "rchanrt", "tchanrt";
+ <0x00 0x35000000 0x00 0x100000>,
+ <0x00 0x30b00000 0x00 0x4000>,
+ <0x00 0x30c00000 0x00 0x4000>,
+ <0x00 0x30d00000 0x00 0x4000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt",
+ "tchan", "rchan", "rflow";
msi-parent = <&main_udmass_inta>;
#dma-cells = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 672cb2acc1be..60b26374ae0c 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -353,8 +353,12 @@ mcu_udmap: dma-controller@285c0000 {
compatible = "ti,j721e-navss-mcu-udmap";
reg = <0x00 0x285c0000 0x00 0x100>,
<0x00 0x2a800000 0x00 0x40000>,
- <0x00 0x2aa00000 0x00 0x40000>;
- reg-names = "gcfg", "rchanrt", "tchanrt";
+ <0x00 0x2aa00000 0x00 0x40000>,
+ <0x00 0x284a0000 0x00 0x4000>,
+ <0x00 0x284c0000 0x00 0x4000>,
+ <0x00 0x28400000 0x00 0x2000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt",
+ "tchan", "rchan", "rflow";
msi-parent = <&main_udmass_inta>;
#dma-cells = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 746b9f8b1c64..2569b4c08ffb 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -382,8 +382,12 @@ main_udmap: dma-controller@31150000 {
compatible = "ti,j721e-navss-main-udmap";
reg = <0x0 0x31150000 0x0 0x100>,
<0x0 0x34000000 0x0 0x100000>,
- <0x0 0x35000000 0x0 0x100000>;
- reg-names = "gcfg", "rchanrt", "tchanrt";
+ <0x0 0x35000000 0x0 0x100000>,
+ <0x0 0x30b00000 0x0 0x20000>,
+ <0x0 0x30c00000 0x0 0x10000>,
+ <0x0 0x30d00000 0x0 0x8000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt",
+ "tchan", "rchan", "rflow";
msi-parent = <&main_udmass_inta>;
#dma-cells = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index 8f259efe3af9..a74912d9e4da 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -475,8 +475,12 @@ mcu_udmap: dma-controller@285c0000 {
compatible = "ti,j721e-navss-mcu-udmap";
reg = <0x0 0x285c0000 0x0 0x100>,
<0x0 0x2a800000 0x0 0x40000>,
- <0x0 0x2aa00000 0x0 0x40000>;
- reg-names = "gcfg", "rchanrt", "tchanrt";
+ <0x0 0x2aa00000 0x0 0x40000>,
+ <0x0 0x284a0000 0x0 0x4000>,
+ <0x0 0x284c0000 0x0 0x4000>,
+ <0x0 0x28400000 0x0 0x2000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt",
+ "tchan", "rchan", "rflow";
msi-parent = <&main_udmass_inta>;
#dma-cells = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index b03731b53a26..bf959312fad0 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -1086,8 +1086,12 @@ main_udmap: dma-controller@31150000 {
compatible = "ti,j721e-navss-main-udmap";
reg = <0x0 0x31150000 0x0 0x100>,
<0x0 0x34000000 0x0 0x80000>,
- <0x0 0x35000000 0x0 0x200000>;
- reg-names = "gcfg", "rchanrt", "tchanrt";
+ <0x0 0x35000000 0x0 0x200000>,
+ <0x0 0x30b00000 0x0 0x20000>,
+ <0x0 0x30c00000 0x0 0x8000>,
+ <0x0 0x30d00000 0x0 0x4000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt",
+ "tchan", "rchan", "rflow";
msi-parent = <&main_udmass_inta>;
#dma-cells = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index d9e2cab8a8c5..80aa33c58a45 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -478,8 +478,12 @@ mcu_udmap: dma-controller@285c0000 {
compatible = "ti,j721e-navss-mcu-udmap";
reg = <0x0 0x285c0000 0x0 0x100>,
<0x0 0x2a800000 0x0 0x40000>,
- <0x0 0x2aa00000 0x0 0x40000>;
- reg-names = "gcfg", "rchanrt", "tchanrt";
+ <0x0 0x2aa00000 0x0 0x40000>,
+ <0x0 0x284a0000 0x0 0x4000>,
+ <0x0 0x284c0000 0x0 0x4000>,
+ <0x0 0x28400000 0x0 0x2000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt",
+ "tchan", "rchan", "rflow";
msi-parent = <&main_udmass_inta>;
#dma-cells = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index d89bcddcfe3d..827328450f96 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -1188,8 +1188,12 @@ main_udmap: dma-controller@31150000 {
compatible = "ti,j721e-navss-main-udmap";
reg = <0x00 0x31150000 0x00 0x100>,
<0x00 0x34000000 0x00 0x80000>,
- <0x00 0x35000000 0x00 0x200000>;
- reg-names = "gcfg", "rchanrt", "tchanrt";
+ <0x00 0x35000000 0x00 0x200000>,
+ <0x00 0x30b00000 0x00 0x20000>,
+ <0x00 0x30c00000 0x00 0x8000>,
+ <0x00 0x30d00000 0x00 0x4000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt",
+ "tchan", "rchan", "rflow";
msi-parent = <&main_udmass_inta>;
#dma-cells = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
index 119f4e2cc0d1..3902a921d7e5 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
@@ -486,8 +486,12 @@ mcu_udmap: dma-controller@285c0000 {
compatible = "ti,j721e-navss-mcu-udmap";
reg = <0x00 0x285c0000 0x00 0x100>,
<0x00 0x2a800000 0x00 0x40000>,
- <0x00 0x2aa00000 0x00 0x40000>;
- reg-names = "gcfg", "rchanrt", "tchanrt";
+ <0x00 0x2aa00000 0x00 0x40000>,
+ <0x00 0x284a0000 0x00 0x4000>,
+ <0x00 0x284c0000 0x00 0x4000>,
+ <0x00 0x28400000 0x00 0x2000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt",
+ "tchan", "rchan", "rflow";
msi-parent = <&main_udmass_inta>;
#dma-cells = <1>;
--
2.43.0
next prev parent reply other threads:[~2023-12-13 14:04 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-13 13:51 [PATCH v2 0/3] arm64: dts: ti: k3: Add additioal " Vignesh Raghavendra
2023-12-13 13:51 ` [PATCH v2 1/3] arm64: dts: ti: k3-am65: Add additional " Vignesh Raghavendra
2023-12-13 13:51 ` Vignesh Raghavendra [this message]
2023-12-13 13:51 ` [PATCH v2 3/3] arm64: dts: ti: k3-am6*: " Vignesh Raghavendra
2023-12-13 15:24 ` [PATCH v2 0/3] arm64: dts: ti: k3: Add additioal " Jai Luthra
2023-12-15 17:20 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231213135138.929517-3-vigneshr@ti.com \
--to=vigneshr@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=j-luthra@ti.com \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®