From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: linux-kselftest@vger.kernel.org,
"Reinette Chatre" <reinette.chatre@intel.com>,
"Shuah Khan" <shuah@kernel.org>,
"Shaopeng Tan" <tan.shaopeng@jp.fujitsu.com>,
"Maciej Wieczór-Retman" <maciej.wieczor-retman@intel.com>,
"Fenghua Yu" <fenghua.yu@intel.com>
Cc: linux-kernel@vger.kernel.org,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH v4 05/29] selftests/resctrl: Split fill_buf to allow tests finer-grained control
Date: Fri, 15 Dec 2023 17:04:51 +0200 [thread overview]
Message-ID: <20231215150515.36983-6-ilpo.jarvinen@linux.intel.com> (raw)
In-Reply-To: <20231215150515.36983-1-ilpo.jarvinen@linux.intel.com>
MBM, MBA and CMT test cases call run_fill_buf() that in turn calls
fill_cache() to alloc and loop indefinitely around the buffer. This
binds buffer allocation and running the benchmark into a single bundle
so that a selftest cannot allocate a buffer once and reuse it. CAT test
doesn't want to loop around the buffer continuously and after rewrite
it needs the ability to allocate the buffer separately.
Split buffer allocation out of fill_cache() into alloc_buffer(). This
change is part of preparation for the new CAT test that allocates a
buffer and does multiple passes over the same buffer (but not in an
infinite loop).
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
---
v3:
- Moved error printout removal to other patch
---
tools/testing/selftests/resctrl/fill_buf.c | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)
diff --git a/tools/testing/selftests/resctrl/fill_buf.c b/tools/testing/selftests/resctrl/fill_buf.c
index 0f6cca61ec94..6d1d5eed595c 100644
--- a/tools/testing/selftests/resctrl/fill_buf.c
+++ b/tools/testing/selftests/resctrl/fill_buf.c
@@ -135,24 +135,34 @@ static int fill_cache_write(unsigned char *buf, size_t buf_size, bool once)
return 0;
}
-static int fill_cache(size_t buf_size, int memflush, int op, bool once)
+static unsigned char *alloc_buffer(size_t buf_size, int memflush)
{
unsigned char *buf;
- int ret;
buf = malloc_and_init_memory(buf_size);
if (!buf)
- return -1;
+ return NULL;
/* Flush the memory before using to avoid "cache hot pages" effect */
if (memflush)
mem_flush(buf, buf_size);
+ return buf;
+}
+
+static int fill_cache(size_t buf_size, int memflush, int op, bool once)
+{
+ unsigned char *buf;
+ int ret;
+
+ buf = alloc_buffer(buf_size, memflush);
+ if (!buf)
+ return -1;
+
if (op == 0)
ret = fill_cache_read(buf, buf_size, once);
else
ret = fill_cache_write(buf, buf_size, once);
-
free(buf);
if (ret) {
@@ -160,8 +170,7 @@ static int fill_cache(size_t buf_size, int memflush, int op, bool once)
return -1;
}
-
- return 0;
+ return ret;
}
int run_fill_buf(size_t span, int memflush, int op, bool once)
--
2.30.2
next prev parent reply other threads:[~2023-12-15 15:07 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-15 15:04 [PATCH v4 00/29] selftests/resctrl: CAT test improvements & generalized test framework Ilpo Järvinen
2023-12-15 15:04 ` [PATCH v4 01/29] selftests/resctrl: Convert perror() to ksft_perror() or ksft_print_msg() Ilpo Järvinen
2023-12-15 17:39 ` Reinette Chatre
2023-12-15 15:04 ` [PATCH v4 02/29] selftests/resctrl: Return -1 instead of errno on error Ilpo Järvinen
2023-12-15 15:04 ` [PATCH v4 03/29] selftests/resctrl: Don't use ctrlc_handler() outside signal handling Ilpo Järvinen
2023-12-15 15:04 ` [PATCH v4 04/29] selftests/resctrl: Change function comments to say < 0 on error Ilpo Järvinen
2023-12-15 15:04 ` Ilpo Järvinen [this message]
2023-12-15 15:04 ` [PATCH v4 06/29] selftests/resctrl: Refactor fill_buf functions Ilpo Järvinen
2023-12-15 15:04 ` [PATCH v4 07/29] selftests/resctrl: Refactor get_cbm_mask() and rename to get_full_cbm() Ilpo Järvinen
2023-12-15 17:40 ` Reinette Chatre
2023-12-15 15:04 ` [PATCH v4 08/29] selftests/resctrl: Mark get_cache_size() cache_type const Ilpo Järvinen
2023-12-15 15:04 ` [PATCH v4 09/29] selftests/resctrl: Create cache_portion_size() helper Ilpo Järvinen
2023-12-15 15:04 ` [PATCH v4 10/29] selftests/resctrl: Exclude shareable bits from schemata in CAT test Ilpo Järvinen
2023-12-15 15:04 ` [PATCH v4 11/29] selftests/resctrl: Split measure_cache_vals() Ilpo Järvinen
2023-12-15 15:04 ` [PATCH v4 12/29] selftests/resctrl: Split show_cache_info() to test specific and generic parts Ilpo Järvinen
2023-12-15 15:04 ` [PATCH v4 13/29] selftests/resctrl: Remove unnecessary __u64 -> unsigned long conversion Ilpo Järvinen
2023-12-15 15:05 ` [PATCH v4 14/29] selftests/resctrl: Remove nested calls in perf event handling Ilpo Järvinen
2023-12-15 15:05 ` [PATCH v4 15/29] selftests/resctrl: Consolidate naming of perf event related things Ilpo Järvinen
2023-12-15 15:05 ` [PATCH v4 16/29] selftests/resctrl: Improve perf init Ilpo Järvinen
2023-12-15 15:05 ` [PATCH v4 17/29] selftests/resctrl: Convert perf related globals to locals Ilpo Järvinen
2023-12-15 15:05 ` [PATCH v4 18/29] selftests/resctrl: Move cat_val() to cat_test.c and rename to cat_test() Ilpo Järvinen
2023-12-15 15:05 ` [PATCH v4 19/29] selftests/resctrl: Open perf fd before start & add error handling Ilpo Järvinen
2023-12-15 15:05 ` [PATCH v4 20/29] selftests/resctrl: Replace file write with volatile variable Ilpo Järvinen
2023-12-15 15:05 ` [PATCH v4 21/29] selftests/resctrl: Read in less obvious order to defeat prefetch optimizations Ilpo Järvinen
2023-12-15 15:05 ` [PATCH v4 22/29] selftests/resctrl: Rewrite Cache Allocation Technology (CAT) test Ilpo Järvinen
2023-12-15 15:05 ` [PATCH v4 23/29] selftests/resctrl: Restore the CPU affinity after CAT test Ilpo Järvinen
2023-12-15 15:05 ` [PATCH v4 24/29] selftests/resctrl: Create struct for input parameters Ilpo Järvinen
2023-12-15 15:05 ` [PATCH v4 25/29] selftests/resctrl: Introduce generalized test framework Ilpo Järvinen
2023-12-15 15:05 ` [PATCH v4 26/29] selftests/resctrl: Pass write_schemata() resource instead of test name Ilpo Järvinen
2023-12-15 15:05 ` [PATCH v4 27/29] selftests/resctrl: Add helper to convert L2/3 to integer Ilpo Järvinen
2023-12-15 15:05 ` [PATCH v4 28/29] selftests/resctrl: Rename resource ID to domain ID Ilpo Järvinen
2023-12-15 15:05 ` [PATCH v4 29/29] selftests/resctrl: Get domain id from cache id Ilpo Järvinen
2023-12-15 17:45 ` [PATCH v4 00/29] selftests/resctrl: CAT test improvements & generalized test framework Reinette Chatre
2023-12-15 23:45 ` Reinette Chatre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231215150515.36983-6-ilpo.jarvinen@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=fenghua.yu@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=maciej.wieczor-retman@intel.com \
--cc=reinette.chatre@intel.com \
--cc=shuah@kernel.org \
--cc=tan.shaopeng@jp.fujitsu.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®