[PATCH 0/4] Add support for Mobileye EyeQ5 reset controller

["Théo Lebrun" <theo.lebrun@bootlin.com>]

Hi,

We follow-up the platform support series for Mobileye EyeQ5 [1] with
this reset controller patch series.

The registers are located in a shared register region called OLB
("Other Logic Block"). A single driver instance handles the three
existing reset domains, each with their custom logic:
 - We busy-wait on the first two for hardware LBIST reasons (logic
   built-in self-test).
 - Domains 0 & 2 work in a bit-per-reset fashion while domain 1 works in
   a register-per-reset fashion.

We end the series by adding the node to the platform devicetree and
reset handles to the three UARTs.

[1]: https://lore.kernel.org/lkml/20231212163459.1923041-1-gregory.clement@bootlin.com/

Have a nice day,
Théo Lebrun

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
Théo Lebrun (4):
      dt-bindings: reset: mobileye,eyeq5-reset: add bindings
      reset: eyeq5: add driver
      MIPS: mobileye: eyeq5: add OLB reset controller node
      MIPS: mobileye: eyeq5: add reset properties to uarts

 .../bindings/reset/mobileye,eyeq5-reset.yaml       |  69 +++++
 MAINTAINERS                                        |   3 +
 arch/mips/boot/dts/mobileye/eyeq5.dtsi             |   9 +
 drivers/reset/Kconfig                              |  13 +
 drivers/reset/Makefile                             |   1 +
 drivers/reset/reset-eyeq5.c                        | 323 +++++++++++++++++++++
 include/dt-bindings/reset/mobileye,eyeq5-reset.h   |  80 +++++
 7 files changed, 498 insertions(+)
---
base-commit: 0bb6b85cadabf93a754df740bd1b6c56ef41ac2c
change-id: 20231023-mbly-reset-b587dac68d0b

Best regards,
-- 
Théo Lebrun <theo.lebrun@bootlin.com>