mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Elad Nachman <enachman@marvell.com>
To: <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
	<conor+dt@kernel.org>, <andrew@lunn.ch>,
	<gregory.clement@bootlin.com>, <sebastian.hesselbarth@gmail.com>,
	<pali@kernel.org>, <mrkiko.rs@gmail.com>,
	<chris.packham@alliedtelesis.co.nz>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Cc: <enachman@marvell.com>, <cyuval@marvell.com>
Subject: [PATCH 0/2] arm64: dts: a7k: add COM Express boards
Date: Mon, 18 Dec 2023 17:44:29 +0200	[thread overview]
Message-ID: <20231218154431.3789032-1-enachman@marvell.com> (raw)

From: Elad Nachman <enachman@marvell.com>

Add support for Armada 7020 Express Type 7 CPU module board by Marvell.
Add device tree bindings for this board.
Define this COM Express CPU module as dtsi and provide a dtsi file for
the carrier board (Marvell DB-98CX85x0 COM Express type 7 carrier board).

Since memory is soldered on CPU module, memory node is on CPU module
dtsi file.

This Carrier board only utilizes the PCIe link, hence no special device
or driver support is provided by this dtsi file.
Devise a dts file for the combined com express carrier and CPU module.

The Aramda 7020 CPU COM Express board offers the following features:

1.  Armada 7020 CPU, with dual ARM A72 cores
2.  DDR4 memory, 8GB, on board soldered
3.  1Gbit Out of Band Ethernet via RGMII to PHY and RJ45 connector,
    all are present on A7K CPU module (none on the carrier)
4.  Optional 10G KR Ethernet going via the COM Express type 7 connector
5.  On-board 8 Gbit, 8-bit bus width NAND flash
6.  On-board 512 Mbit SPI flash
7.  PCIe Root Complex, 4 lanes PCIe gen3 connectivity, going via the
    COM Express type 7 connector
8.  m.2 SATA connector
9.  Micro-SD card connector
10. USB 2.0 via COM Express type 7 connector
11. Two i2c interfaces - one to the CPU module, and one to the
    carrier board via the COM Express type 7 connector
12. UART (mini USB connector by virtue of FT2232D UART to USB
    converter, connected to the Armada 7020 UART0)

Elad Nachman (2):
  dt-bindings: arm64: add Marvell 7k COMe boards
  arm64: dts: a7k: add COM Express boards

 .../bindings/arm/marvell/armada-7k-8k.yaml    |  11 ++
 arch/arm64/boot/dts/marvell/Makefile          |   1 +
 .../dts/marvell/armada-7020-comexpress.dtsi   | 161 ++++++++++++++++++
 arch/arm64/boot/dts/marvell/armada-70x0.dtsi  |   7 +
 .../boot/dts/marvell/armada-ap806-dual.dtsi   |   4 +-
 .../dts/marvell/db-falcon-carrier-a7k.dts     |  27 +++
 .../boot/dts/marvell/db-falcon-carrier.dtsi   |  22 +++
 7 files changed, 231 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm64/boot/dts/marvell/armada-7020-comexpress.dtsi
 create mode 100644 arch/arm64/boot/dts/marvell/db-falcon-carrier-a7k.dts
 create mode 100644 arch/arm64/boot/dts/marvell/db-falcon-carrier.dtsi

-- 
2.25.1


             reply	other threads:[~2023-12-18 15:44 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-18 15:44 Elad Nachman [this message]
2023-12-18 15:44 ` [PATCH 1/2] dt-bindings: arm64: add Marvell 7k COMe boards Elad Nachman
2023-12-19 16:40   ` Conor Dooley
2023-12-18 15:44 ` [PATCH 2/2] arm64: dts: a7k: add COM Express boards Elad Nachman
2026-01-22 16:59 [PATCH 0/2] " Elad Nachman
2026-01-22 18:07 ` Rob Herring
2026-01-23  9:10   ` Gregory CLEMENT
2026-01-23  9:20     ` Maxime Chevallier
2026-01-23  9:27       ` Gregory CLEMENT
2026-01-27 16:23         ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231218154431.3789032-1-enachman@marvell.com \
    --to=enachman@marvell.com \
    --cc=andrew@lunn.ch \
    --cc=chris.packham@alliedtelesis.co.nz \
    --cc=conor+dt@kernel.org \
    --cc=cyuval@marvell.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregory.clement@bootlin.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mrkiko.rs@gmail.com \
    --cc=pali@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sebastian.hesselbarth@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®