[net PATCH] octeontx2-af: Fix max NPC MCAM entry check while validating ref_entry

[Suman Ghosh <sumang@marvell.com>]

As of today, the last MCAM entry was not getting allocated because of
a <= check with the max_bmap count. This patch modifies that and if the
requested entry is greater than the available entries then set it to the
max value.

Fixes: f92749586176 ("octeontx2-af: NPC MCAM entry alloc/free support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
---
 drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
index 0bcf3e559280..3784347b6fd8 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
@@ -2678,18 +2678,17 @@ int rvu_mbox_handler_npc_mcam_alloc_entry(struct rvu *rvu,
 	rsp->entry = NPC_MCAM_ENTRY_INVALID;
 	rsp->free_count = 0;
 
-	/* Check if ref_entry is within range */
-	if (req->priority && req->ref_entry >= mcam->bmap_entries) {
-		dev_err(rvu->dev, "%s: reference entry %d is out of range\n",
-			__func__, req->ref_entry);
-		return NPC_MCAM_INVALID_REQ;
-	}
+	/* Check if ref_entry is greater that the range
+	 * then set it to max value.
+	 */
+	if (req->ref_entry > mcam->bmap_entries)
+		req->ref_entry = mcam->bmap_entries;
 
 	/* ref_entry can't be '0' if requested priority is high.
 	 * Can't be last entry if requested priority is low.
 	 */
 	if ((!req->ref_entry && req->priority == NPC_MCAM_HIGHER_PRIO) ||
-	    ((req->ref_entry == (mcam->bmap_entries - 1)) &&
+	    ((req->ref_entry == mcam->bmap_entries) &&
 	     req->priority == NPC_MCAM_LOWER_PRIO))
 		return NPC_MCAM_INVALID_REQ;
 
-- 
2.25.1