From: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
To: Andrzej Hajda <andrzej.hajda@intel.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Robert Foss <rfoss@kernel.org>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
Jonas Karlman <jonas@kwiboo.se>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>,
Daniel Vetter <daniel@ffwll.ch>,
Boris Brezillon <bbrezillon@kernel.org>,
Peter Rosin <peda@axentia.se>,
Linus Walleij <linus.walleij@linaro.org>,
Fabrizio Castro <fabrizio.castro@bp.renesas.com>,
Jyri Sarha <jsarha@ti.com>
Cc: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
Nishanth Menon <nm@ti.com>, Aradhya Bhatia <a-bhatia1@ti.com>,
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Subject: [PATCH 1/2] drm/bridge: sii902x: Fix probing race issue
Date: Wed, 03 Jan 2024 15:31:07 +0200 [thread overview]
Message-ID: <20240103-si902x-fixes-v1-1-b9fd3e448411@ideasonboard.com> (raw)
In-Reply-To: <20240103-si902x-fixes-v1-0-b9fd3e448411@ideasonboard.com>
A null pointer dereference crash has been observed rarely on TI
platforms using sii9022 bridge:
[ 53.271356] sii902x_get_edid+0x34/0x70 [sii902x]
[ 53.276066] sii902x_bridge_get_edid+0x14/0x20 [sii902x]
[ 53.281381] drm_bridge_get_edid+0x20/0x34 [drm]
[ 53.286305] drm_bridge_connector_get_modes+0x8c/0xcc [drm_kms_helper]
[ 53.292955] drm_helper_probe_single_connector_modes+0x190/0x538 [drm_kms_helper]
[ 53.300510] drm_client_modeset_probe+0x1f0/0xbd4 [drm]
[ 53.305958] __drm_fb_helper_initial_config_and_unlock+0x50/0x510 [drm_kms_helper]
[ 53.313611] drm_fb_helper_initial_config+0x48/0x58 [drm_kms_helper]
[ 53.320039] drm_fbdev_dma_client_hotplug+0x84/0xd4 [drm_dma_helper]
[ 53.326401] drm_client_register+0x5c/0xa0 [drm]
[ 53.331216] drm_fbdev_dma_setup+0xc8/0x13c [drm_dma_helper]
[ 53.336881] tidss_probe+0x128/0x264 [tidss]
[ 53.341174] platform_probe+0x68/0xc4
[ 53.344841] really_probe+0x188/0x3c4
[ 53.348501] __driver_probe_device+0x7c/0x16c
[ 53.352854] driver_probe_device+0x3c/0x10c
[ 53.357033] __device_attach_driver+0xbc/0x158
[ 53.361472] bus_for_each_drv+0x88/0xe8
[ 53.365303] __device_attach+0xa0/0x1b4
[ 53.369135] device_initial_probe+0x14/0x20
[ 53.373314] bus_probe_device+0xb0/0xb4
[ 53.377145] deferred_probe_work_func+0xcc/0x124
[ 53.381757] process_one_work+0x1f0/0x518
[ 53.385770] worker_thread+0x1e8/0x3dc
[ 53.389519] kthread+0x11c/0x120
[ 53.392750] ret_from_fork+0x10/0x20
The issue here is as follows:
- tidss probes, but is deferred as sii902x is still missing.
- sii902x starts probing and enters sii902x_init().
- sii902x calls drm_bridge_add(). Now the sii902x bridge is ready from
DRM's perspective.
- sii902x calls sii902x_audio_codec_init() and
platform_device_register_data()
- The registration of the audio platform device causes probing of the
deferred devices.
- tidss probes, which eventually causes sii902x_bridge_get_edid() to be
called.
- sii902x_bridge_get_edid() tries to use the i2c to read the edid.
However, the sii902x driver has not set up the i2c part yet, leading
to the crash.
Fix this by moving the drm_bridge_add() to the end of the
sii902x_init(), which is also at the very end of sii902x_probe().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Fixes: 21d808405fe4 ("drm/bridge/sii902x: Fix EDID readback")
---
drivers/gpu/drm/bridge/sii902x.c | 29 ++++++++++++++++-------------
1 file changed, 16 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
index 2bdc5b439beb..69da73e414a9 100644
--- a/drivers/gpu/drm/bridge/sii902x.c
+++ b/drivers/gpu/drm/bridge/sii902x.c
@@ -1080,16 +1080,6 @@ static int sii902x_init(struct sii902x *sii902x)
return ret;
}
- sii902x->bridge.funcs = &sii902x_bridge_funcs;
- sii902x->bridge.of_node = dev->of_node;
- sii902x->bridge.timings = &default_sii902x_timings;
- sii902x->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID;
-
- if (sii902x->i2c->irq > 0)
- sii902x->bridge.ops |= DRM_BRIDGE_OP_HPD;
-
- drm_bridge_add(&sii902x->bridge);
-
sii902x_audio_codec_init(sii902x, dev);
i2c_set_clientdata(sii902x->i2c, sii902x);
@@ -1102,7 +1092,21 @@ static int sii902x_init(struct sii902x *sii902x)
return -ENOMEM;
sii902x->i2cmux->priv = sii902x;
- return i2c_mux_add_adapter(sii902x->i2cmux, 0, 0, 0);
+ ret = i2c_mux_add_adapter(sii902x->i2cmux, 0, 0, 0);
+ if (ret)
+ return ret;
+
+ sii902x->bridge.funcs = &sii902x_bridge_funcs;
+ sii902x->bridge.of_node = dev->of_node;
+ sii902x->bridge.timings = &default_sii902x_timings;
+ sii902x->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID;
+
+ if (sii902x->i2c->irq > 0)
+ sii902x->bridge.ops |= DRM_BRIDGE_OP_HPD;
+
+ drm_bridge_add(&sii902x->bridge);
+
+ return 0;
}
static int sii902x_probe(struct i2c_client *client)
@@ -1170,12 +1174,11 @@ static int sii902x_probe(struct i2c_client *client)
}
static void sii902x_remove(struct i2c_client *client)
-
{
struct sii902x *sii902x = i2c_get_clientdata(client);
- i2c_mux_del_adapters(sii902x->i2cmux);
drm_bridge_remove(&sii902x->bridge);
+ i2c_mux_del_adapters(sii902x->i2cmux);
}
static const struct of_device_id sii902x_dt_ids[] = {
--
2.34.1
next prev parent reply other threads:[~2024-01-03 13:31 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-03 13:31 [PATCH 0/2] drm/bridge: sii902x: Crash fixes Tomi Valkeinen
2024-01-03 13:31 ` Tomi Valkeinen [this message]
2024-01-03 13:31 ` [PATCH 2/2] drm/bridge: sii902x: Fix audio codec unregistration Tomi Valkeinen
2024-01-08 8:20 ` [PATCH 0/2] drm/bridge: sii902x: Crash fixes Linus Walleij
2024-01-16 8:53 ` Aradhya Bhatia
2024-01-16 8:59 ` Neil Armstrong
2024-01-23 12:02 ` Robert Foss
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240103-si902x-fixes-v1-1-b9fd3e448411@ideasonboard.com \
--to=tomi.valkeinen@ideasonboard.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=a-bhatia1@ti.com \
--cc=airlied@gmail.com \
--cc=andrzej.hajda@intel.com \
--cc=bbrezillon@kernel.org \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=fabrizio.castro@bp.renesas.com \
--cc=jernej.skrabec@gmail.com \
--cc=jonas@kwiboo.se \
--cc=jsarha@ti.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=nm@ti.com \
--cc=peda@axentia.se \
--cc=rfoss@kernel.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®