From: Wenhua Lin <Wenhua.Lin@unisoc.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Andy Shevchenko <andy@kernel.org>,
Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Orson Zhai <orsonzhai@gmail.com>,
Baolin Wang <baolin.wang@linux.alibaba.com>,
Chunyan Zhang <zhang.lyra@gmail.com>,
<linux-gpio@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
wenhua lin <wenhua.lin1994@gmail.com>,
Wenhua Lin <Wenhua.Lin@unisoc.com>,
Xiongpeng Wu <xiongpeng.wu@unisoc.com>
Subject: [PATCH V3 2/4] gpio: eic-sprd: Clear interrupt after set the interrupt type
Date: Thu, 4 Jan 2024 10:42:42 +0800 [thread overview]
Message-ID: <20240104024244.12163-3-Wenhua.Lin@unisoc.com> (raw)
In-Reply-To: <20240104024244.12163-1-Wenhua.Lin@unisoc.com>
The initialization state of the eic module is a high level trigger.
If it is currently a high level, the interrupt condition is met at
this time, and the eic interrupt has a latch capability, which will
cause an interrupt to occur after booting. To avoid this, When setting
the eic interrupt trigger type, clear the interrupt once.
Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com>
---
drivers/gpio/gpio-eic-sprd.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/gpio/gpio-eic-sprd.c b/drivers/gpio/gpio-eic-sprd.c
index bdcb3510a208..e492157e5154 100644
--- a/drivers/gpio/gpio-eic-sprd.c
+++ b/drivers/gpio/gpio-eic-sprd.c
@@ -384,29 +384,34 @@ static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_edge_irq);
break;
case IRQ_TYPE_EDGE_FALLING:
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_edge_irq);
break;
case IRQ_TYPE_EDGE_BOTH:
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 1);
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_edge_irq);
break;
case IRQ_TYPE_LEVEL_HIGH:
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_level_irq);
break;
case IRQ_TYPE_LEVEL_LOW:
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_level_irq);
break;
default:
@@ -419,29 +424,34 @@ static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_edge_irq);
break;
case IRQ_TYPE_EDGE_FALLING:
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_edge_irq);
break;
case IRQ_TYPE_EDGE_BOTH:
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 1);
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_edge_irq);
break;
case IRQ_TYPE_LEVEL_HIGH:
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_level_irq);
break;
case IRQ_TYPE_LEVEL_LOW:
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_level_irq);
break;
default:
--
2.17.1
next prev parent reply other threads:[~2024-01-04 2:43 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-04 2:42 [PATCH V3 0/4] gpio: eic-sprd: Modification of UNISOC Platform EIC Driver Wenhua Lin
2024-01-04 2:42 ` [PATCH V3 1/4] gpio: eic-sprd: Keep the clock rtc_1k on Wenhua Lin
2024-01-04 12:59 ` Andy Shevchenko
2024-01-05 2:11 ` wenhua lin
2024-01-05 2:17 ` Chunyan Zhang
2024-01-05 2:28 ` wenhua lin
2024-01-05 3:25 ` Chunyan Zhang
2024-01-08 7:36 ` wenhua lin
2024-01-04 2:42 ` Wenhua Lin [this message]
2024-01-04 2:42 ` [PATCH V3 3/4] gpio: eic-sprd: Modify the calculation method of eic number Wenhua Lin
2024-01-04 13:01 ` Andy Shevchenko
2024-01-05 2:13 ` wenhua lin
2024-01-04 2:42 ` [PATCH V3 4/4] gpio: eic-sprd: Support 8 banks EIC controller Wenhua Lin
2024-01-08 8:55 ` Chunyan Zhang
2024-01-09 7:58 ` wenhua lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240104024244.12163-3-Wenhua.Lin@unisoc.com \
--to=wenhua.lin@unisoc.com \
--cc=andy@kernel.org \
--cc=baolin.wang@linux.alibaba.com \
--cc=brgl@bgdev.pl \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=orsonzhai@gmail.com \
--cc=wenhua.lin1994@gmail.com \
--cc=xiongpeng.wu@unisoc.com \
--cc=zhang.lyra@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®