mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: James Ogletree <jogletre@opensource.cirrus.com>
Cc: James Ogletree <jogletre@opensource.cirrus.com>,
	James Ogletree <james.ogletree@cirrus.com>,
	Fred Treven <fred.treven@cirrus.com>,
	Ben Bright <ben.bright@cirrus.com>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Simon Trimmer <simont@opensource.cirrus.com>,
	Charles Keepax <ckeepax@opensource.cirrus.com>,
	Richard Fitzgerald <rf@opensource.cirrus.com>,
	Lee Jones <lee@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>,
	James Schulman <james.schulman@cirrus.com>,
	David Rhodes <david.rhodes@cirrus.com>,
	Sebastian Reichel <sebastian.reichel@collabora.com>,
	Jacky Bai <ping.bai@nxp.com>, Jeff LaBundy <jeff@labundy.com>,
	Peng Fan <peng.fan@nxp.com>,
	Weidong Wang <wangweidong.a@awinic.com>,
	Herve Codina <herve.codina@bootlin.com>,
	Arnd Bergmann <arnd@arndb.de>,
	Shenghao Ding <13916275206@139.com>,
	Ryan Lee <ryans.lee@analog.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Maxim Kochetkov <fido_max@inbox.ru>,
	Shuming Fan <shumingf@realtek.com>,
	"open list:CIRRUS LOGIC HAPTIC DRIVERS"
	<patches@opensource.cirrus.com>,
	"open list:INPUT (KEYBOARD, MOUSE, JOYSTICK,
	TOUCHSCREEN)..." <linux-input@vger.kernel.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	open list <linux-kernel@vger.kernel.org>,
	"open list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEM..."
	<linux-sound@vger.kernel.org>,
	"moderated list:CIRRUS LOGIC AUDIO CODEC DRIVERS"
	<alsa-devel@alsa-project.org>
Subject: [PATCH v5 3/5] mfd: cs40l50: Add support for CS40L50 core driver
Date: Thu, 4 Jan 2024 22:36:36 +0000	[thread overview]
Message-ID: <20240104223643.876292-4-jogletre@opensource.cirrus.com> (raw)
In-Reply-To: <20240104223643.876292-1-jogletre@opensource.cirrus.com>

Introduce support for Cirrus Logic Device CS40L50: a
haptic driver with waveform memory, integrated DSP,
and closed-loop algorithms.

The MFD component registers and initializes the device.

Signed-off-by: James Ogletree <jogletre@opensource.cirrus.com>
---
 MAINTAINERS                 |   2 +
 drivers/mfd/Kconfig         |  30 ++
 drivers/mfd/Makefile        |   4 +
 drivers/mfd/cs40l50-core.c  | 536 ++++++++++++++++++++++++++++++++++++
 drivers/mfd/cs40l50-i2c.c   |  69 +++++
 drivers/mfd/cs40l50-spi.c   |  69 +++++
 include/linux/mfd/cs40l50.h | 128 +++++++++
 7 files changed, 838 insertions(+)
 create mode 100644 drivers/mfd/cs40l50-core.c
 create mode 100644 drivers/mfd/cs40l50-i2c.c
 create mode 100644 drivers/mfd/cs40l50-spi.c
 create mode 100644 include/linux/mfd/cs40l50.h

diff --git a/MAINTAINERS b/MAINTAINERS
index b71017a187f8..69a9e0a3b968 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4940,6 +4940,8 @@ M:	Ben Bright <ben.bright@cirrus.com>
 L:	patches@opensource.cirrus.com
 S:	Supported
 F:	Documentation/devicetree/bindings/input/cirrus,cs40l50.yaml
+F:	drivers/mfd/cs40l*
+F:	include/linux/mfd/cs40l*
 
 CIRRUS LOGIC DSP FIRMWARE DRIVER
 M:	Simon Trimmer <simont@opensource.cirrus.com>
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 90ce58fd629e..6273c255f107 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2241,6 +2241,36 @@ config MCP_UCB1200_TS
 
 endmenu
 
+config MFD_CS40L50_CORE
+	tristate
+	select MFD_CORE
+	select FW_CS_DSP
+	select REGMAP_IRQ
+
+config MFD_CS40L50_I2C
+	tristate "Cirrus Logic CS40L50 (I2C)"
+	select REGMAP_I2C
+	select MFD_CS40L50_CORE
+	depends on I2C
+	help
+	  Select this to support the Cirrus Logic CS40L50 Haptic
+	  Driver over I2C.
+
+	  This driver can be built as a module. If built as a module it will be
+	  called "cs40l50-i2c".
+
+config MFD_CS40L50_SPI
+	tristate "Cirrus Logic CS40L50 (SPI)"
+	select REGMAP_SPI
+	select MFD_CS40L50_CORE
+	depends on SPI
+	help
+	  Select this to support the Cirrus Logic CS40L50 Haptic
+	  Driver over SPI.
+
+	  This driver can be built as a module. If built as a module it will be
+	  called "cs40l50-spi".
+
 config MFD_VEXPRESS_SYSREG
 	tristate "Versatile Express System Registers"
 	depends on VEXPRESS_CONFIG && GPIOLIB
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index c66f07edcd0e..a8d18ba155d0 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -88,6 +88,10 @@ obj-$(CONFIG_MFD_MADERA)	+= madera.o
 obj-$(CONFIG_MFD_MADERA_I2C)	+= madera-i2c.o
 obj-$(CONFIG_MFD_MADERA_SPI)	+= madera-spi.o
 
+obj-$(CONFIG_MFD_CS40L50_CORE)	+= cs40l50-core.o
+obj-$(CONFIG_MFD_CS40L50_I2C)	+= cs40l50-i2c.o
+obj-$(CONFIG_MFD_CS40L50_SPI)	+= cs40l50-spi.o
+
 obj-$(CONFIG_TPS6105X)		+= tps6105x.o
 obj-$(CONFIG_TPS65010)		+= tps65010.o
 obj-$(CONFIG_TPS6507X)		+= tps6507x.o
diff --git a/drivers/mfd/cs40l50-core.c b/drivers/mfd/cs40l50-core.c
new file mode 100644
index 000000000000..ecc7846e9f8d
--- /dev/null
+++ b/drivers/mfd/cs40l50-core.c
@@ -0,0 +1,536 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CS40L50 Advanced Haptic Driver with waveform memory,
+ * integrated DSP, and closed-loop algorithms
+ *
+ * Copyright 2023 Cirrus Logic, Inc.
+ *
+ * Author: James Ogletree <james.ogletree@cirrus.com>
+ */
+
+#include <linux/firmware/cirrus/cs_dsp.h>
+#include <linux/firmware/cirrus/wmfw.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/cs40l50.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+
+static const struct mfd_cell cs40l50_devs[] = {
+	{ .name = "cs40l50-codec", },
+	{ .name = "cs40l50-vibra", },
+};
+
+const struct regmap_config cs40l50_regmap = {
+	.reg_bits =		32,
+	.reg_stride =		4,
+	.val_bits =		32,
+	.reg_format_endian =	REGMAP_ENDIAN_BIG,
+	.val_format_endian =	REGMAP_ENDIAN_BIG,
+};
+EXPORT_SYMBOL_GPL(cs40l50_regmap);
+
+static const char * const cs40l50_supplies[] = {
+	"vp", "vio",
+};
+
+static const struct regmap_irq cs40l50_reg_irqs[] = {
+	REGMAP_IRQ_REG(CS40L50_DSP_QUEUE_IRQ, CS40L50_IRQ1_INT_2_OFFSET,
+		       CS40L50_DSP_QUEUE_MASK),
+	REGMAP_IRQ_REG(CS40L50_AMP_SHORT_IRQ, CS40L50_IRQ1_INT_1_OFFSET,
+		       CS40L50_AMP_SHORT_MASK),
+	REGMAP_IRQ_REG(CS40L50_TEMP_ERR_IRQ, CS40L50_IRQ1_INT_8_OFFSET,
+		       CS40L50_TEMP_ERR_MASK),
+	REGMAP_IRQ_REG(CS40L50_BST_UVP_IRQ, CS40L50_IRQ1_INT_9_OFFSET,
+		       CS40L50_BST_UVP_MASK),
+	REGMAP_IRQ_REG(CS40L50_BST_SHORT_IRQ, CS40L50_IRQ1_INT_9_OFFSET,
+		       CS40L50_BST_SHORT_MASK),
+	REGMAP_IRQ_REG(CS40L50_BST_ILIMIT_IRQ, CS40L50_IRQ1_INT_9_OFFSET,
+		       CS40L50_BST_ILIMIT_MASK),
+	REGMAP_IRQ_REG(CS40L50_UVLO_VDDBATT_IRQ, CS40L50_IRQ1_INT_10_OFFSET,
+		       CS40L50_UVLO_VDDBATT_MASK),
+	REGMAP_IRQ_REG(CS40L50_GLOBAL_ERROR_IRQ, CS40L50_IRQ1_INT_18_OFFSET,
+		       CS40L50_GLOBAL_ERROR_MASK),
+};
+
+static struct regmap_irq_chip cs40l50_irq_chip = {
+	.name =		"CS40L50 IRQ Controller",
+
+	.status_base =	CS40L50_IRQ1_INT_1,
+	.mask_base =	CS40L50_IRQ1_MASK_1,
+	.ack_base =	CS40L50_IRQ1_INT_1,
+	.num_regs =	22,
+
+	.irqs =		cs40l50_reg_irqs,
+	.num_irqs =	ARRAY_SIZE(cs40l50_reg_irqs),
+
+	.runtime_pm =	true,
+};
+
+static const struct cs_dsp_region cs40l50_dsp_regions[] = {
+	{
+		.type = WMFW_HALO_PM_PACKED,
+		.base = CS40L50_PMEM_0
+	},
+	{
+		.type = WMFW_HALO_XM_PACKED,
+		.base = CS40L50_XMEM_PACKED_0
+	},
+	{
+		.type = WMFW_HALO_YM_PACKED,
+		.base = CS40L50_YMEM_PACKED_0
+	},
+	{
+		.type = WMFW_ADSP2_XM,
+		.base = CS40L50_XMEM_UNPACKED24_0
+	},
+	{
+		.type = WMFW_ADSP2_YM,
+		.base = CS40L50_YMEM_UNPACKED24_0
+	},
+};
+
+static void cs40l50_dsp_remove(void *data)
+{
+	cs_dsp_remove((struct cs_dsp *)data);
+}
+
+static int cs40l50_dsp_init(struct cs40l50 *cs40l50)
+{
+	int err;
+
+	cs40l50->dsp.num = 1;
+	cs40l50->dsp.type = WMFW_HALO;
+	cs40l50->dsp.dev = cs40l50->dev;
+	cs40l50->dsp.regmap = cs40l50->regmap;
+	cs40l50->dsp.base = CS40L50_CORE_BASE;
+	cs40l50->dsp.base_sysinfo = CS40L50_SYS_INFO_ID;
+	cs40l50->dsp.mem = cs40l50_dsp_regions;
+	cs40l50->dsp.num_mems = ARRAY_SIZE(cs40l50_dsp_regions);
+	cs40l50->dsp.no_core_startstop = true;
+
+	err = cs_dsp_halo_init(&cs40l50->dsp);
+	if (err)
+		return err;
+
+	return devm_add_action_or_reset(cs40l50->dev, cs40l50_dsp_remove,
+					&cs40l50->dsp);
+}
+
+static const struct reg_sequence cs40l50_err_rls[] = {
+	{ CS40L50_ERR_RLS, CS40L50_GLOBAL_ERR_RLS_SET },
+	{ CS40L50_ERR_RLS, CS40L50_GLOBAL_ERR_RLS_CLEAR },
+};
+
+struct cs40l50_irq {
+	char *name;
+	u32 virq;
+};
+
+static struct cs40l50_irq cs40l50_irqs[] = {
+	{ .name = "DSP", },
+	{ .name = "Global", },
+	{ .name = "Boost UVLO", },
+	{ .name = "Boost current limit", },
+	{ .name = "Boost short", },
+	{ .name = "Boost undervolt", },
+	{ .name = "Overtemp", },
+	{ .name = "Amp short", },
+};
+
+static int cs40l50_handle_hw_err(struct cs40l50 *cs40l50, int irq)
+{
+	int i;
+
+	/* Log hardware interrupt and execute error release sequence */
+	for (i = 1; i < ARRAY_SIZE(cs40l50_irqs); i++) {
+		if (cs40l50_irqs[i].virq == irq) {
+			dev_err(cs40l50->dev, "%s error\n", cs40l50_irqs[i].name);
+			return regmap_multi_reg_write(cs40l50->regmap, cs40l50_err_rls,
+						      ARRAY_SIZE(cs40l50_err_rls));
+		}
+	}
+
+	return 0;
+}
+
+static int cs40l50_process_dsp_queue(struct cs40l50 *cs40l50)
+{
+	u32 val, rd_ptr, wt_ptr;
+	int err = 0;
+
+	/* Read from DSP queue and update read pointer */
+	while (!err) {
+		err = regmap_read(cs40l50->regmap, CS40L50_DSP_QUEUE_WT, &wt_ptr);
+		if (err)
+			break;
+
+		err = regmap_read(cs40l50->regmap, CS40L50_DSP_QUEUE_RD, &rd_ptr);
+		if (err)
+			break;
+
+		/* Check if queue is empty */
+		if (wt_ptr == rd_ptr)
+			break;
+
+		err = regmap_read(cs40l50->regmap, rd_ptr, &val);
+		if (err)
+			break;
+
+		dev_dbg(cs40l50->dev, "DSP payload: %#X", val);
+
+		rd_ptr += sizeof(u32);
+
+		if (rd_ptr > CS40L50_DSP_QUEUE_END)
+			rd_ptr = CS40L50_DSP_QUEUE_BASE;
+
+		err =  regmap_write(cs40l50->regmap, CS40L50_DSP_QUEUE_RD, rd_ptr);
+		if (err)
+			break;
+	}
+
+	return err;
+}
+
+static irqreturn_t cs40l50_irq_handler(int irq, void *data)
+{
+	struct cs40l50 *cs40l50 = data;
+	int err;
+
+	mutex_lock(&cs40l50->lock);
+
+	if (irq == cs40l50_irqs[0].virq)
+		err = cs40l50_process_dsp_queue(cs40l50);
+	else
+		err = cs40l50_handle_hw_err(cs40l50, irq);
+
+	mutex_unlock(&cs40l50->lock);
+
+	return IRQ_RETVAL(!err);
+}
+
+
+static int cs40l50_irq_init(struct cs40l50 *cs40l50)
+{
+	struct device *dev = cs40l50->dev;
+	int i, err, virq;
+
+	err = devm_regmap_add_irq_chip(dev, cs40l50->regmap, cs40l50->irq,
+				       IRQF_ONESHOT | IRQF_SHARED, 0,
+				       &cs40l50_irq_chip, &cs40l50->irq_data);
+	if (err) {
+		dev_err(dev, "Failed adding IRQ chip\n");
+		return err;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(cs40l50_irqs); i++) {
+		virq = regmap_irq_get_virq(cs40l50->irq_data, i);
+		if (virq < 0) {
+			dev_err(dev, "Failed getting %s\n", cs40l50_irqs[i].name);
+			return virq;
+		}
+
+		cs40l50_irqs[i].virq = virq;
+
+		err = devm_request_threaded_irq(dev, virq, NULL,
+						cs40l50_irq_handler,
+						IRQF_ONESHOT | IRQF_SHARED,
+						cs40l50_irqs[i].name, cs40l50);
+		if (err) {
+			dev_err(dev, "Failed requesting %s\n", cs40l50_irqs[i].name);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static const struct reg_sequence cs40l50_stop_core[] = {
+	{ CS40L50_CCM_CORE_CONTROL, CS40L50_CLOCK_DISABLE},
+	{ CS40L50_RAM_INIT, CS40L50_RAM_INIT_FLAG},
+	{ CS40L50_PWRMGT_CTL, CS40L50_MEM_RDY_HW},
+};
+
+static const struct reg_sequence cs40l50_internal_vamp_config[] = {
+	{ CS40L50_BST_LPMODE_SEL,	CS40L50_DCM_LOW_POWER },
+	{ CS40L50_BLOCK_ENABLES2,	CS40L50_OVERTEMP_WARN },
+};
+
+static const struct reg_sequence cs40l50_irq_mask_override[] = {
+	{ CS40L50_IRQ1_MASK_2,	CS40L50_IRQ_MASK_2_OVERRIDE },
+	{ CS40L50_IRQ1_MASK_20,	CS40L50_IRQ_MASK_20_OVERRIDE },
+};
+
+static void cs40l50_dsp_power_down(void *data)
+{
+	cs_dsp_power_down((struct cs_dsp *)data);
+}
+
+static int cs40l50_power_up_dsp(struct cs40l50 *cs40l50)
+{
+	int err;
+
+	mutex_lock(&cs40l50->lock);
+
+	if (cs40l50->patch) {
+		/* Stop core if loading patch file */
+		err = regmap_multi_reg_write(cs40l50->regmap, cs40l50_stop_core,
+					     ARRAY_SIZE(cs40l50_stop_core));
+		if (err)
+			goto err_mutex;
+	}
+
+	err = cs_dsp_power_up(&cs40l50->dsp, cs40l50->patch, "cs40l50.wmfw",
+			      cs40l50->bin, "cs40l50.bin", "cs40l50");
+	if (err)
+		goto err_mutex;
+
+	err = devm_add_action_or_reset(cs40l50->dev, cs40l50_dsp_power_down,
+				       &cs40l50->dsp);
+	if (err)
+		goto err_mutex;
+
+	if (cs40l50->patch) {
+		/* Resume core after loading patch file */
+		err = regmap_write(cs40l50->regmap, CS40L50_CCM_CORE_CONTROL,
+				   CS40L50_CLOCK_ENABLE);
+		if (err)
+			goto err_mutex;
+	}
+err_mutex:
+	mutex_unlock(&cs40l50->lock);
+
+	return err;
+}
+
+static struct cs_dsp_wseq cs40l50_wseqs[] = {
+	{
+		.reg =	CS40L50_POWER_ON_WSEQ,
+		.size = CS40L50_PSEQ_SIZE
+	},
+};
+
+static int cs40l50_configure_dsp(struct cs40l50 *cs40l50)
+{
+	u32 nwaves;
+	int err;
+
+	if (cs40l50->bin) {
+		/* Log number of effects if wavetable was loaded */
+		err = regmap_read(cs40l50->regmap, CS40L50_NUM_WAVES, &nwaves);
+		if (err)
+			return err;
+
+		dev_info(cs40l50->dev, "Loaded with %u RAM waveforms\n", nwaves);
+	}
+
+	err = cs_dsp_wseq_init(&cs40l50->dsp, cs40l50_wseqs,
+			       ARRAY_SIZE(cs40l50_wseqs));
+	if (err) {
+		dev_err(cs40l50->dev, "Failed to initialize write sequence\n");
+		return err;
+	}
+
+	/* Configure CS40L50 to use an internal V_AMP supply */
+	err = regmap_multi_reg_write(cs40l50->regmap, cs40l50_internal_vamp_config,
+				     ARRAY_SIZE(cs40l50_internal_vamp_config));
+	if (err)
+		return err;
+
+	err = cs_dsp_wseq_multi_write(&cs40l50->dsp, &cs40l50_wseqs[0],
+				      cs40l50_internal_vamp_config,
+				      ARRAY_SIZE(cs40l50_internal_vamp_config),
+				      false, CS_DSP_WSEQ_FULL);
+	if (err)
+		return err;
+
+	/* Override firmware defaults for IRQ masks */
+	err = regmap_multi_reg_write(cs40l50->regmap, cs40l50_irq_mask_override,
+				     ARRAY_SIZE(cs40l50_irq_mask_override));
+	if (err)
+		return err;
+
+	return cs_dsp_wseq_multi_write(&cs40l50->dsp, &cs40l50_wseqs[0],
+				       cs40l50_irq_mask_override,
+				       ARRAY_SIZE(cs40l50_irq_mask_override),
+				       false, CS_DSP_WSEQ_FULL);
+}
+
+static void cs40l50_start_dsp(const struct firmware *bin, void *context)
+{
+	struct cs40l50 *cs40l50 = context;
+	int err;
+
+	/* Wavetable is optional; proceed even if NULL */
+	cs40l50->bin = bin;
+
+	err = cs40l50_power_up_dsp(cs40l50);
+	if (err) {
+		dev_err(cs40l50->dev, "Failed to power up DSP: %d\n", err);
+		goto err_fw;
+	}
+
+	err = cs40l50_configure_dsp(cs40l50);
+	if (err)
+		dev_err(cs40l50->dev, "Failed to configure DSP: %d\n", err);
+
+err_fw:
+	release_firmware(cs40l50->bin);
+	release_firmware(cs40l50->patch);
+}
+
+static void cs40l50_request_patch(const struct firmware *patch, void *context)
+{
+	struct cs40l50 *cs40l50 = context;
+
+	/* Patch file is optional; proceed even if NULL */
+	cs40l50->patch = patch;
+
+	if (request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT, CS40L50_WT,
+				    cs40l50->dev, GFP_KERNEL,
+				    cs40l50, cs40l50_start_dsp)) {
+		dev_err(cs40l50->dev, "Failed to request %s\n", CS40L50_WT);
+		release_firmware(cs40l50->patch);
+	}
+}
+
+static int cs40l50_get_model(struct cs40l50 *cs40l50)
+{
+	struct device *dev = cs40l50->dev;
+	int err;
+
+	err = regmap_read(cs40l50->regmap, CS40L50_DEVID, &cs40l50->devid);
+	if (err)
+		return err;
+
+	if (cs40l50->devid != CS40L50_DEVID_A)
+		return -EINVAL;
+
+	err = regmap_read(cs40l50->regmap, CS40L50_REVID, &cs40l50->revid);
+	if (err)
+		return err;
+
+	if (cs40l50->revid < CS40L50_REVID_B0)
+		return -EINVAL;
+
+	dev_info(dev, "Cirrus Logic CS40L50 revision %02X\n", cs40l50->revid);
+
+	return 0;
+}
+
+static void cs40l50_pm_runtime_setup(struct device *dev)
+{
+	pm_runtime_set_autosuspend_delay(dev, CS40L50_AUTOSUSPEND_MS);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_get_noresume(dev);
+	devm_pm_runtime_enable(dev);
+}
+
+int cs40l50_probe(struct cs40l50 *cs40l50)
+{
+	struct device *dev = cs40l50->dev;
+	int err;
+
+	mutex_init(&cs40l50->lock);
+
+	cs40l50->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(cs40l50->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(cs40l50->reset_gpio),
+				     "Failed getting reset GPIO\n");
+
+	err = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(cs40l50_supplies),
+					     cs40l50_supplies);
+	if (err)
+		return dev_err_probe(dev, err, "Failed getting supplies\n");
+
+	/* Ensure minimum reset pulse width */
+	usleep_range(CS40L50_RESET_PULSE_US, CS40L50_RESET_PULSE_US + 100);
+
+	gpiod_set_value_cansleep(cs40l50->reset_gpio, 0);
+
+	/* Wait for control port to be ready */
+	usleep_range(CS40L50_CP_READY_US, CS40L50_CP_READY_US + 100);
+
+	err = cs40l50_dsp_init(cs40l50);
+	if (err)
+		return dev_err_probe(dev, err, "Failed to initialize DSP\n");
+
+	cs40l50_pm_runtime_setup(dev);
+
+	err = cs40l50_get_model(cs40l50);
+	if (err)
+		return dev_err_probe(dev, err, "Failed to get part number\n");
+
+	err = cs40l50_irq_init(cs40l50);
+	if (err)
+		return dev_err_probe(dev, err, "Failed to initialize IRQs\n");
+
+	err = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT, CS40L50_FW,
+				      dev, GFP_KERNEL, cs40l50, cs40l50_request_patch);
+	if (err)
+		return dev_err_probe(dev, err, "Failed to request %s\n", CS40L50_FW);
+
+	err = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, cs40l50_devs,
+				   ARRAY_SIZE(cs40l50_devs), NULL, 0, NULL);
+	if (err)
+		return dev_err_probe(dev, err, "Failed to add sub devices\n");
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cs40l50_probe);
+
+int cs40l50_remove(struct cs40l50 *cs40l50)
+{
+	gpiod_set_value_cansleep(cs40l50->reset_gpio, 1);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cs40l50_remove);
+
+static int cs40l50_runtime_suspend(struct device *dev)
+{
+	struct cs40l50 *cs40l50 = dev_get_drvdata(dev);
+
+	return regmap_write(cs40l50->regmap, CS40L50_DSP_QUEUE, CS40L50_ALLOW_HIBER);
+}
+
+static int cs40l50_runtime_resume(struct device *dev)
+{
+	struct cs40l50 *cs40l50 = dev_get_drvdata(dev);
+	int err, i;
+	u32 val;
+
+	/* Device NAKs when exiting hibernation, so optionally retry here. */
+	for (i = 0; i < CS40L50_DSP_TIMEOUT_COUNT; i++) {
+		err = regmap_write(cs40l50->regmap, CS40L50_DSP_QUEUE,
+				     CS40L50_PREVENT_HIBER);
+		if (!err)
+			break;
+
+		usleep_range(CS40L50_DSP_POLL_US, CS40L50_DSP_POLL_US + 100);
+	}
+
+	for (i = 0; i < CS40L50_DSP_TIMEOUT_COUNT; i++) {
+		err = regmap_read(cs40l50->regmap, CS40L50_DSP_QUEUE, &val);
+		if (!err && val == 0)
+			return 0;
+
+		usleep_range(CS40L50_DSP_POLL_US, CS40L50_DSP_POLL_US + 100);
+	}
+
+	dev_err(cs40l50->dev, "Failed to resume: %d\n", err ?: -ETIMEDOUT);
+
+	return err ?: -ETIMEDOUT;
+}
+
+EXPORT_GPL_DEV_PM_OPS(cs40l50_pm_ops) = {
+	RUNTIME_PM_OPS(cs40l50_runtime_suspend, cs40l50_runtime_resume, NULL)
+};
+
+MODULE_DESCRIPTION("CS40L50 Advanced Haptic Driver");
+MODULE_AUTHOR("James Ogletree, Cirrus Logic Inc. <james.ogletree@cirrus.com>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(FW_CS_DSP);
diff --git a/drivers/mfd/cs40l50-i2c.c b/drivers/mfd/cs40l50-i2c.c
new file mode 100644
index 000000000000..5214b611ed5c
--- /dev/null
+++ b/drivers/mfd/cs40l50-i2c.c
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CS40L50 Advanced Haptic Driver with waveform memory,
+ * integrated DSP, and closed-loop algorithms
+ *
+ * Copyright 2023 Cirrus Logic, Inc.
+ *
+ * Author: James Ogletree <james.ogletree@cirrus.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/mfd/cs40l50.h>
+
+static int cs40l50_i2c_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct cs40l50 *cs40l50;
+
+	cs40l50 = devm_kzalloc(dev, sizeof(*cs40l50), GFP_KERNEL);
+	if (!cs40l50)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, cs40l50);
+
+	cs40l50->regmap = devm_regmap_init_i2c(client, &cs40l50_regmap);
+	if (IS_ERR(cs40l50->regmap))
+		return dev_err_probe(cs40l50->dev, PTR_ERR(cs40l50->regmap),
+				     "Failed to initialize register map\n");
+
+	cs40l50->dev = dev;
+	cs40l50->irq = client->irq;
+
+	return cs40l50_probe(cs40l50);
+}
+
+static void cs40l50_i2c_remove(struct i2c_client *client)
+{
+	struct cs40l50 *cs40l50 = i2c_get_clientdata(client);
+
+	cs40l50_remove(cs40l50);
+}
+
+static const struct i2c_device_id cs40l50_id_i2c[] = {
+	{"cs40l50"},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, cs40l50_id_i2c);
+
+static const struct of_device_id cs40l50_of_match[] = {
+	{ .compatible = "cirrus,cs40l50" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, cs40l50_of_match);
+
+static struct i2c_driver cs40l50_i2c_driver = {
+	.driver = {
+		.name = "cs40l50",
+		.of_match_table = cs40l50_of_match,
+		.pm = pm_ptr(&cs40l50_pm_ops),
+	},
+	.id_table = cs40l50_id_i2c,
+	.probe = cs40l50_i2c_probe,
+	.remove = cs40l50_i2c_remove,
+};
+module_i2c_driver(cs40l50_i2c_driver);
+
+MODULE_DESCRIPTION("CS40L50 I2C Driver");
+MODULE_AUTHOR("James Ogletree, Cirrus Logic Inc. <james.ogletree@cirrus.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/cs40l50-spi.c b/drivers/mfd/cs40l50-spi.c
new file mode 100644
index 000000000000..a7468ea53acd
--- /dev/null
+++ b/drivers/mfd/cs40l50-spi.c
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CS40L50 Advanced Haptic Driver with waveform memory,
+ * integrated DSP, and closed-loop algorithms
+ *
+ * Copyright 2023 Cirrus Logic, Inc.
+ *
+ * Author: James Ogletree <james.ogletree@cirrus.com>
+ */
+
+#include <linux/mfd/cs40l50.h>
+#include <linux/mfd/spi.h>
+
+static int cs40l50_spi_probe(struct spi_device *spi)
+{
+	struct cs40l50 *cs40l50;
+	struct device *dev = &spi->dev;
+
+	cs40l50 = devm_kzalloc(dev, sizeof(*cs40l50), GFP_KERNEL);
+	if (!cs40l50)
+		return -ENOMEM;
+
+	spi_set_drvdata(spi, cs40l50);
+
+	cs40l50->regmap = devm_regmap_init_spi(spi, &cs40l50_regmap);
+	if (IS_ERR(cs40l50->regmap))
+		return dev_err_probe(cs40l50->dev, PTR_ERR(cs40l50->regmap),
+				     "Failed to initialize register map\n");
+
+	cs40l50->dev = dev;
+	cs40l50->irq = spi->irq;
+
+	return cs40l50_probe(cs40l50);
+}
+
+static void cs40l50_spi_remove(struct spi_device *spi)
+{
+	struct cs40l50 *cs40l50 = spi_get_drvdata(spi);
+
+	cs40l50_remove(cs40l50);
+}
+
+static const struct spi_device_id cs40l50_id_spi[] = {
+	{"cs40l50"},
+	{}
+};
+MODULE_DEVICE_TABLE(spi, cs40l50_id_spi);
+
+static const struct of_device_id cs40l50_of_match[] = {
+	{ .compatible = "cirrus,cs40l50" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, cs40l50_of_match);
+
+static struct spi_driver cs40l50_spi_driver = {
+	.driver = {
+		.name = "cs40l50",
+		.of_match_table = cs40l50_of_match,
+		.pm = pm_ptr(&cs40l50_pm_ops),
+	},
+	.id_table = cs40l50_id_spi,
+	.probe = cs40l50_spi_probe,
+	.remove = cs40l50_spi_remove,
+};
+module_spi_driver(cs40l50_spi_driver);
+
+MODULE_DESCRIPTION("CS40L50 SPI Driver");
+MODULE_AUTHOR("James Ogletree, Cirrus Logic Inc. <james.ogletree@cirrus.com>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/cs40l50.h b/include/linux/mfd/cs40l50.h
new file mode 100644
index 000000000000..260f192f4dfd
--- /dev/null
+++ b/include/linux/mfd/cs40l50.h
@@ -0,0 +1,128 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * CS40L50 Advanced Haptic Driver with waveform memory,
+ * integrated DSP, and closed-loop algorithms
+ *
+ * Copyright 2023 Cirrus Logic, Inc.
+ *
+ * Author: James Ogletree <james.ogletree@cirrus.com>
+ */
+
+#ifndef __CS40L50_H__
+#define __CS40L50_H__
+
+#include <linux/firmware/cirrus/cs_dsp.h>
+#include <linux/gpio/consumer.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+
+/* Power Supply Configuration */
+#define CS40L50_BLOCK_ENABLES2			0x201C
+#define CS40L50_ERR_RLS				0x2034
+#define CS40L50_PWRMGT_CTL			0x2900
+#define CS40L50_BST_LPMODE_SEL			0x3810
+#define CS40L50_DCM_LOW_POWER		0x1
+#define CS40L50_OVERTEMP_WARN		0x4000010
+
+/* Interrupts */
+#define CS40L50_IRQ1_INT_1			0xE010
+#define CS40L50_IRQ1_MASK_1			0xE090
+#define CS40L50_IRQ1_MASK_2			0xE094
+#define CS40L50_IRQ1_MASK_20			0xE0DC
+#define CS40L50_IRQ_MASK_2_OVERRIDE	0xFFDF7FFF
+#define CS40L50_IRQ_MASK_20_OVERRIDE	0x15C01000
+#define CS40L50_IRQ1_INT_1_OFFSET	(4 * 0)
+#define CS40L50_IRQ1_INT_2_OFFSET	(4 * 1)
+#define CS40L50_IRQ1_INT_8_OFFSET	(4 * 7)
+#define CS40L50_IRQ1_INT_9_OFFSET	(4 * 8)
+#define CS40L50_IRQ1_INT_10_OFFSET	(4 * 9)
+#define CS40L50_IRQ1_INT_18_OFFSET	(4 * 17)
+#define CS40L50_GLOBAL_ERR_RLS_SET	BIT(11)
+#define CS40L50_GLOBAL_ERR_RLS_CLEAR	0
+#define CS40L50_AMP_SHORT_MASK		BIT(31)
+#define CS40L50_DSP_QUEUE_MASK		BIT(21)
+#define CS40L50_TEMP_ERR_MASK		BIT(31)
+#define CS40L50_BST_UVP_MASK		BIT(6)
+#define CS40L50_BST_SHORT_MASK		BIT(7)
+#define CS40L50_BST_ILIMIT_MASK		BIT(18)
+#define CS40L50_UVLO_VDDBATT_MASK	BIT(16)
+#define CS40L50_GLOBAL_ERROR_MASK	BIT(15)
+
+enum cs40l50_irq_list {
+	CS40L50_DSP_QUEUE_IRQ,
+	CS40L50_GLOBAL_ERROR_IRQ,
+	CS40L50_UVLO_VDDBATT_IRQ,
+	CS40L50_BST_ILIMIT_IRQ,
+	CS40L50_BST_SHORT_IRQ,
+	CS40L50_BST_UVP_IRQ,
+	CS40L50_TEMP_ERR_IRQ,
+	CS40L50_AMP_SHORT_IRQ,
+};
+
+/* DSP */
+#define CS40L50_XMEM_PACKED_0			0x2000000
+#define CS40L50_XMEM_UNPACKED24_0		0x2800000
+#define CS40L50_SYS_INFO_ID			0x25E0000
+#define CS40L50_RAM_INIT			0x28021DC
+#define CS40L50_DSP_QUEUE_WT			0x28042C8
+#define CS40L50_DSP_QUEUE_RD			0x28042CC
+#define CS40L50_POWER_ON_WSEQ			0x2804320
+#define CS40L50_NUM_WAVES			0x280CB4C
+#define CS40L50_CORE_BASE			0x2B80000
+#define CS40L50_CCM_CORE_CONTROL		0x2BC1000
+#define CS40L50_YMEM_PACKED_0			0x2C00000
+#define CS40L50_YMEM_UNPACKED24_0		0x3400000
+#define CS40L50_PMEM_0				0x3800000
+#define CS40L50_MEM_RDY_HW		0x2
+#define CS40L50_RAM_INIT_FLAG		0x1
+#define CS40L50_CLOCK_DISABLE		0x80
+#define CS40L50_CLOCK_ENABLE		0x281
+#define CS40L50_DSP_POLL_US		1000
+#define CS40L50_DSP_TIMEOUT_COUNT	100
+#define CS40L50_RESET_PULSE_US		2200
+#define CS40L50_CP_READY_US		3100
+#define CS40L50_AUTOSUSPEND_MS		2000
+#define CS40L50_PSEQ_SIZE		200
+
+/* DSP Commands */
+#define CS40L50_DSP_QUEUE_BASE		0x11004
+#define CS40L50_DSP_QUEUE_END		0x1101C
+#define CS40L50_DSP_QUEUE		0x11020
+#define CS40L50_PREVENT_HIBER	0x2000003
+#define CS40L50_ALLOW_HIBER	0x2000004
+#define CS40L50_START_I2S	0x3000002
+#define CS40L50_OWT_PUSH	0x3000008
+#define CS40L50_STOP_PLAYBACK	0x5000000
+#define CS40L50_OWT_DELETE	0xD000000
+
+/* Firmware files */
+#define CS40L50_FW	"cs40l50.wmfw"
+#define CS40L50_WT	"cs40l50.bin"
+
+/* Device */
+#define CS40L50_DEVID			0x0
+#define CS40L50_REVID			0x4
+#define CS40L50_DEVID_A		0x40A50
+#define CS40L50_REVID_B0	0xB0
+
+struct cs40l50 {
+	struct device *dev;
+	struct regmap *regmap;
+	struct mutex lock;
+	struct cs_dsp dsp;
+	struct gpio_desc *reset_gpio;
+	struct regmap_irq_chip_data *irq_data;
+	const struct firmware *patch;
+	const struct firmware *bin;
+	int irq;
+	u32 devid;
+	u32 revid;
+};
+
+int cs40l50_probe(struct cs40l50 *cs40l50);
+int cs40l50_remove(struct cs40l50 *cs40l50);
+
+extern const struct regmap_config cs40l50_regmap;
+extern const struct dev_pm_ops cs40l50_pm_ops;
+
+#endif /* __CS40L50_H__ */
-- 
2.25.1


  parent reply	other threads:[~2024-01-04 22:38 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-04 22:36 [PATCH v5 0/5] Add support for CS40L50 James Ogletree
2024-01-04 22:36 ` [PATCH v5 1/5] firmware: cs_dsp: Add write sequencer interface James Ogletree
2024-01-05 16:36   ` Charles Keepax
2024-01-04 22:36 ` [PATCH v5 2/5] dt-bindings: input: cirrus,cs40l50: Add initial DT binding James Ogletree
2024-01-04 22:36 ` James Ogletree [this message]
2024-01-05 14:04   ` [PATCH v5 3/5] mfd: cs40l50: Add support for CS40L50 core driver Charles Keepax
2024-01-09 21:08     ` James Ogletree
2024-01-04 22:36 ` [PATCH v5 4/5] Input: cs40l50 - Add support for the CS40L50 haptic driver James Ogletree
2024-01-05 15:01   ` Charles Keepax
2024-01-07  1:58   ` Dmitry Torokhov
2024-01-09 22:03     ` James Ogletree
2024-01-09 22:31       ` Dmitry Torokhov
2024-01-10 14:36         ` James Ogletree
2024-01-11  7:28           ` Dmitry Torokhov
2024-01-12 15:41             ` James Ogletree
2024-01-24 20:58               ` James Ogletree
2024-01-04 22:36 ` [PATCH v5 5/5] ASoC: cs40l50: Support I2S streaming to CS40L50 James Ogletree
2024-01-05 14:24   ` Charles Keepax

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240104223643.876292-4-jogletre@opensource.cirrus.com \
    --to=jogletre@opensource.cirrus.com \
    --cc=13916275206@139.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=arnd@arndb.de \
    --cc=ben.bright@cirrus.com \
    --cc=broonie@kernel.org \
    --cc=ckeepax@opensource.cirrus.com \
    --cc=conor+dt@kernel.org \
    --cc=david.rhodes@cirrus.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=fido_max@inbox.ru \
    --cc=fred.treven@cirrus.com \
    --cc=herve.codina@bootlin.com \
    --cc=james.ogletree@cirrus.com \
    --cc=james.schulman@cirrus.com \
    --cc=jeff@labundy.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lee@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=patches@opensource.cirrus.com \
    --cc=peng.fan@nxp.com \
    --cc=perex@perex.cz \
    --cc=ping.bai@nxp.com \
    --cc=rf@opensource.cirrus.com \
    --cc=robh+dt@kernel.org \
    --cc=ryans.lee@analog.com \
    --cc=sebastian.reichel@collabora.com \
    --cc=shumingf@realtek.com \
    --cc=simont@opensource.cirrus.com \
    --cc=tiwai@suse.com \
    --cc=wangweidong.a@awinic.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®