From: Wenhua Lin <Wenhua.Lin@unisoc.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Andy Shevchenko <andy@kernel.org>,
Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Orson Zhai <orsonzhai@gmail.com>,
Baolin Wang <baolin.wang@linux.alibaba.com>,
Chunyan Zhang <zhang.lyra@gmail.com>,
<linux-gpio@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
wenhua lin <wenhua.lin1994@gmail.com>,
Wenhua Lin <Wenhua.Lin@unisoc.com>,
Xiongpeng Wu <xiongpeng.wu@unisoc.com>
Subject: [PATCH V4 1/2] gpio: eic-sprd: Clear interrupt after set the interrupt type
Date: Tue, 9 Jan 2024 15:38:48 +0800 [thread overview]
Message-ID: <20240109073849.10791-2-Wenhua.Lin@unisoc.com> (raw)
In-Reply-To: <20240109073849.10791-1-Wenhua.Lin@unisoc.com>
The raw interrupt status of eic maybe set before the interrupt is enabled,
since the eic interrupt has a latch function, which would trigger the
interrupt event once enabled it from user side. To solve this problem,
interrupts generated before setting the interrupt trigger type are ignored.
Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support")
Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com>
---
drivers/gpio/gpio-eic-sprd.c | 32 ++++++++++++++++++++++++++++----
1 file changed, 28 insertions(+), 4 deletions(-)
diff --git a/drivers/gpio/gpio-eic-sprd.c b/drivers/gpio/gpio-eic-sprd.c
index be7f2fa5aa7b..806b88d8dfb7 100644
--- a/drivers/gpio/gpio-eic-sprd.c
+++ b/drivers/gpio/gpio-eic-sprd.c
@@ -330,20 +330,27 @@ static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
switch (flow_type) {
case IRQ_TYPE_LEVEL_HIGH:
sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1);
+ sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IC, 1);
break;
case IRQ_TYPE_LEVEL_LOW:
sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IC, 1);
break;
case IRQ_TYPE_EDGE_RISING:
case IRQ_TYPE_EDGE_FALLING:
case IRQ_TYPE_EDGE_BOTH:
state = sprd_eic_get(chip, offset);
- if (state)
+ if (state) {
sprd_eic_update(chip, offset,
SPRD_EIC_DBNC_IEV, 0);
- else
+ sprd_eic_update(chip, offset,
+ SPRD_EIC_DBNC_IC, 1);
+ } else {
sprd_eic_update(chip, offset,
SPRD_EIC_DBNC_IEV, 1);
+ sprd_eic_update(chip, offset,
+ SPRD_EIC_DBNC_IC, 1);
+ }
break;
default:
return -ENOTSUPP;
@@ -355,20 +362,27 @@ static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
switch (flow_type) {
case IRQ_TYPE_LEVEL_HIGH:
sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTCLR, 1);
break;
case IRQ_TYPE_LEVEL_LOW:
sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1);
+ sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTCLR, 1);
break;
case IRQ_TYPE_EDGE_RISING:
case IRQ_TYPE_EDGE_FALLING:
case IRQ_TYPE_EDGE_BOTH:
state = sprd_eic_get(chip, offset);
- if (state)
+ if (state) {
sprd_eic_update(chip, offset,
SPRD_EIC_LATCH_INTPOL, 0);
- else
+ sprd_eic_update(chip, offset,
+ SPRD_EIC_LATCH_INTCLR, 1);
+ } else {
sprd_eic_update(chip, offset,
SPRD_EIC_LATCH_INTPOL, 1);
+ sprd_eic_update(chip, offset,
+ SPRD_EIC_LATCH_INTCLR, 1);
+ }
break;
default:
return -ENOTSUPP;
@@ -382,29 +396,34 @@ static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_edge_irq);
break;
case IRQ_TYPE_EDGE_FALLING:
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_edge_irq);
break;
case IRQ_TYPE_EDGE_BOTH:
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 1);
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_edge_irq);
break;
case IRQ_TYPE_LEVEL_HIGH:
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_level_irq);
break;
case IRQ_TYPE_LEVEL_LOW:
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_level_irq);
break;
default:
@@ -417,29 +436,34 @@ static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_edge_irq);
break;
case IRQ_TYPE_EDGE_FALLING:
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_edge_irq);
break;
case IRQ_TYPE_EDGE_BOTH:
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 1);
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_edge_irq);
break;
case IRQ_TYPE_LEVEL_HIGH:
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_level_irq);
break;
case IRQ_TYPE_LEVEL_LOW:
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_level_irq);
break;
default:
--
2.17.1
next prev parent reply other threads:[~2024-01-09 7:39 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-09 7:38 [PATCH V4 0/2] gpio: sprd: Modification of UNISOC Platform EIC Driver Wenhua Lin
2024-01-09 7:38 ` Wenhua Lin [this message]
2024-01-22 10:00 ` [PATCH V4 1/2] gpio: eic-sprd: Clear interrupt after set the interrupt type Chunyan Zhang
2024-01-09 7:38 ` [PATCH V4 2/2] gpio: eic-sprd: Optimize the calculation method of eic number Wenhua Lin
2024-01-22 10:02 ` Chunyan Zhang
2024-01-22 9:33 ` [PATCH V4 0/2] gpio: sprd: Modification of UNISOC Platform EIC Driver Bartosz Golaszewski
2024-01-22 10:42 ` Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240109073849.10791-2-Wenhua.Lin@unisoc.com \
--to=wenhua.lin@unisoc.com \
--cc=andy@kernel.org \
--cc=baolin.wang@linux.alibaba.com \
--cc=brgl@bgdev.pl \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=orsonzhai@gmail.com \
--cc=wenhua.lin1994@gmail.com \
--cc=xiongpeng.wu@unisoc.com \
--cc=zhang.lyra@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®