From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
To: linux-kernel@vger.kernel.org
Cc: linux-amarula@amarulasolutions.com, "Lee Jones" <lee@kernel.org>,
"Alexandre Torgue" <alexandre.torgue@foss.st.com>,
"Raphael Gallais-Pou" <raphael.gallais-pou@foss.st.com>,
"Dario Binacchi" <dario.binacchi@amarulasolutions.com>,
"Andre Przywara" <andre.przywara@arm.com>,
"Baruch Siach" <baruch@tkos.co.il>,
"Conor Dooley" <conor+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Leonard Göhrs" <l.goehrs@pengutronix.de>,
"Linus Walleij" <linus.walleij@linaro.org>,
"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
"Peter Rosin" <peda@axentia.se>,
"Rob Herring" <robh+dt@kernel.org>,
"Sean Nyekjaer" <sean@geanix.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-stm32@st-md-mailman.stormreply.com
Subject: [PATCH v8 0/5] Add display support for stm32f769-disco board
Date: Fri, 12 Jan 2024 15:48:20 +0100 [thread overview]
Message-ID: <20240112144902.40044-1-dario.binacchi@amarulasolutions.com> (raw)
The series adds display support for the stm32f769-disco board. It has been
tested on hardware revisions MB1225-B03 and MB1166-A09. This required
modifications to the nt35510 driver that have already been applied.
Changes in v8:
- Add Acked-by tag of Lee Jones
- Add Reviewed-by tag of Raphael Gallais-Pou
- Add Reviewed-by tag of Raphael Gallais-Pou
- Remove unit name from 'ltdc/port/endpoint@0' to fix the compiling
warning:
../arch/arm/boot/dts/st/stm32f769-disco.dts:189.28-191.5: Warning
(unit_address_vs_reg): /soc/display-controller@40016800/port/endpoint@0: node
has a unit name, but no reg or ranges property
- Add Reviewed-by tag of Linus Walleij
- Add Reviewed-by tag of Raphael Gallais-Pou
Changes in v7:
- Replace .dts with .dtb in the Makefile
Changes in v6:
- Drop patches
- [5/8] dt-bindings: nt35510: add compatible for FRIDA FRD400B25025-A-CTK
- [7/8] drm/panel: nt35510: move hardwired parameters to configuration
- [8/8] drm/panel: nt35510: support FRIDA FRD400B25025-A-CTK
because applied by the maintainer Linus Walleij
Changes in v5:
- Replace GPIOD_ASIS with GPIOD_OUT_HIGH in the call to devm_gpiod_get_optional().
Changes in v2:
- Add Acked-by tag of Conor Dooley
- Change the status of panel_backlight node to "disabled"
- Delete backlight property from panel0 node.
- Re-write the patch [8/8] "drm/panel: nt35510: support FRIDA FRD400B25025-A-CTK"
in the same style as the original driver.
Dario Binacchi (5):
dt-bindings: mfd: stm32f7: Add binding definition for DSI
ARM: dts: stm32: add DSI support on stm32f769
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco
ARM: dts: stm32: add display support on stm32f769-disco
ARM: dts: add stm32f769-disco-mb1225-revb03-mb1166-reva09
arch/arm/boot/dts/st/Makefile | 1 +
...f769-disco-mb1225-revb03-mb1166-reva09.dts | 18 +++++
arch/arm/boot/dts/st/stm32f769-disco.dts | 78 ++++++++++++++++++-
arch/arm/boot/dts/st/stm32f769.dtsi | 21 +++++
include/dt-bindings/mfd/stm32f7-rcc.h | 1 +
5 files changed, 115 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/boot/dts/st/stm32f769-disco-mb1225-revb03-mb1166-reva09.dts
create mode 100644 arch/arm/boot/dts/st/stm32f769.dtsi
--
2.43.0
next reply other threads:[~2024-01-12 14:49 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-12 14:48 Dario Binacchi [this message]
2024-01-12 14:48 ` [PATCH v8 1/5] dt-bindings: mfd: stm32f7: Add binding definition for DSI Dario Binacchi
2024-01-12 14:48 ` [PATCH v8 2/5] ARM: dts: stm32: add DSI support on stm32f769 Dario Binacchi
2024-01-12 14:48 ` [PATCH v8 3/5] ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco Dario Binacchi
2024-01-23 16:31 ` Alexandre TORGUE
2024-01-23 18:27 ` Dario Binacchi
2024-01-12 14:48 ` [PATCH v8 4/5] ARM: dts: stm32: add display support " Dario Binacchi
2024-01-12 14:48 ` [PATCH v8 5/5] ARM: dts: add stm32f769-disco-mb1225-revb03-mb1166-reva09 Dario Binacchi
2024-01-23 16:36 ` Alexandre TORGUE
2024-01-23 18:48 ` Dario Binacchi
2024-01-24 9:56 ` Alexandre TORGUE
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240112144902.40044-1-dario.binacchi@amarulasolutions.com \
--to=dario.binacchi@amarulasolutions.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andre.przywara@arm.com \
--cc=baruch@tkos.co.il \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=l.goehrs@pengutronix.de \
--cc=lee@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=peda@axentia.se \
--cc=raphael.gallais-pou@foss.st.com \
--cc=robh+dt@kernel.org \
--cc=sean@geanix.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®