[PATCH v2 0/3] thermal: Add support of multiple sensors

[Alexandre Bailon <abailon@baylibre.com>]

Following this comment [1], this updates thermal_of to support multiple
sensors.

This has some limitations:
- A sensor must have its own termal zone, even if it is also registered
  inside a thermal zone supporting multiple sensors.
- Only support weighted average

Changes in v2:
- Rebased on 6.7
- Seperated generic multi sensor and dt specfic code
- Simplified the code
- Drop min / max and only do weighted average (seems more adequate for IPA)

[1]: https://patchwork.kernel.org/comment/24723927/

Alexandre Bailon (3):
  dt-bindings: thermal: Restore the thermal-sensors property
  thermal: Add support of multi sensors to thermal_core
  thermal: Add support of multi sensors to thermal_of

 .../bindings/thermal/thermal-zones.yaml       |   5 +-
 drivers/thermal/Makefile                      |   1 +
 drivers/thermal/thermal_core.h                |   7 +
 drivers/thermal/thermal_multi.c               | 178 ++++++++++++++++++
 drivers/thermal/thermal_of.c                  | 139 ++++++++++++++
 5 files changed, 327 insertions(+), 3 deletions(-)
 create mode 100644 drivers/thermal/thermal_multi.c

-- 
2.41.0