From: Francesco Dolcini <francesco@dolcini.it>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>
Cc: Joao Paulo Goncalves <joao.goncalves@toradex.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Francesco Dolcini <francesco.dolcini@toradex.com>
Subject: [PATCH v1 1/2] dt-bindings: arm: fsl: add imx8qm apalis eval v1.2 carrier board
Date: Thu, 25 Jan 2024 11:14:56 +0100 [thread overview]
Message-ID: <20240125101457.9873-2-francesco@dolcini.it> (raw)
In-Reply-To: <20240125101457.9873-1-francesco@dolcini.it>
From: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Add the toradex,apalis-imx8-eval-v1.2 and
toradex,apalis-imx8-v1.1-eval-v1.2 compatible strings for version 1.2
of the Apalis Evaluation Board.
Version v1.2 includes the following changes compared to v1.1:
- 8-bit MMC connector replaced with a 4-bit uSD connector.
- Audio codec NAU88C22 added.
- M24C02 EEPROM i2c added.
- MIPI-CSI-2 connector directly to the board added.
- PCIe switch PEX8605 removed and PCIe now is routed directly to Mini
PCIe connector.
- Power measurement IC INA219 added.
- Replaced DVI with HDMI connector.
- Single-channel USB to UART converter replaced with four-channel USB
to UART/JTAG.
- Temperature sensor TMP75 added.
Please note that board version v1.0 (which reached EOL) is compatible with
v1.1, therefore toradex,apalis-imx8-eval and toradex,apalis-v1.1-imx8-eval
compatible strings should be used for both v1.0 and v1.1.
Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
Documentation/devicetree/bindings/arm/fsl.yaml | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 228dcc5c7d6f..b877f940490a 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1194,7 +1194,8 @@ properties:
- description: i.MX8QM Boards with Toradex Apalis iMX8 Modules
items:
- enum:
- - toradex,apalis-imx8-eval # Apalis iMX8 Module on Apalis Evaluation Board
+ - toradex,apalis-imx8-eval # Apalis iMX8 Module on Apalis Evaluation V1.0/V1.1 Board
+ - toradex,apalis-imx8-eval-v1.2 # Apalis iMX8 Module on Apalis Evaluation V1.2 Board
- toradex,apalis-imx8-ixora-v1.1 # Apalis iMX8 Module on Ixora V1.1 Carrier Board
- const: toradex,apalis-imx8
- const: fsl,imx8qm
@@ -1202,7 +1203,8 @@ properties:
- description: i.MX8QM Boards with Toradex Apalis iMX8 V1.1 Modules
items:
- enum:
- - toradex,apalis-imx8-v1.1-eval # Apalis iMX8 V1.1 Module on Apalis Eval. Board
+ - toradex,apalis-imx8-v1.1-eval # Apalis iMX8 V1.1 Module on Apalis Eval. V1.0/V1.1 Board
+ - toradex,apalis-imx8-v1.1-eval-v1.2 # Apalis iMX8 V1.1 Module on Apalis Eval. V1.2 Board
- toradex,apalis-imx8-v1.1-ixora-v1.1 # Apalis iMX8 V1.1 Module on Ixora V1.1 C. Board
- toradex,apalis-imx8-v1.1-ixora-v1.2 # Apalis iMX8 V1.1 Module on Ixora V1.2 C. Board
- const: toradex,apalis-imx8-v1.1
--
2.39.2
next prev parent reply other threads:[~2024-01-25 10:15 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-25 10:14 [PATCH v1 0/2] arm64: dts: freescale: imx8qm: add " Francesco Dolcini
2024-01-25 10:14 ` Francesco Dolcini [this message]
2024-01-25 17:08 ` [PATCH v1 1/2] dt-bindings: arm: fsl: add imx8qm " Conor Dooley
2024-01-25 19:19 ` Francesco Dolcini
2024-01-25 10:14 ` [PATCH v1 2/2] arm64: dts: freescale: imx8qm: add " Francesco Dolcini
2024-02-06 8:23 ` [PATCH v1 0/2] " Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240125101457.9873-2-francesco@dolcini.it \
--to=francesco@dolcini.it \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=francesco.dolcini@toradex.com \
--cc=joao.goncalves@toradex.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=leoyang.li@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®