From: Suraj Jaiswal <quic_jsuraj@quicinc.com>
To: <quic_jsuraj@quicinc.com>, Vinod Koul <vkoul@kernel.org>,
Bhupesh Sharma <bhupesh.sharma@linaro.org>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
"Jakub Kicinski" <kuba@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
"Jose Abreu" <joabreu@synopsys.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
<netdev@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
Prasad Sodagudi <psodagud@quicinc.com>,
Andrew Halaney <ahalaney@redhat.com>,
Rob Herring <robh@kernel.org>
Cc: <kernel@quicinc.com>, Serge Semin <fancer.lancer@gmail.com>
Subject: [PATCH net-next v12 3/3] net: stmmac: Add driver support for common safety IRQ
Date: Tue, 30 Jan 2024 17:33:06 +0530 [thread overview]
Message-ID: <20240130120306.4120632-4-quic_jsuraj@quicinc.com> (raw)
In-Reply-To: <20240130120306.4120632-1-quic_jsuraj@quicinc.com>
Add support to listen HW safety IRQ like ECC(error
correction code), DPP(data path parity), FSM(finite state
machine) fault in common IRQ line.
Signed-off-by: Suraj Jaiswal <quic_jsuraj@quicinc.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
---
drivers/net/ethernet/stmicro/stmmac/common.h | 1 +
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 3 ++
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 41 ++++++++++++++++++-
.../ethernet/stmicro/stmmac/stmmac_platform.c | 8 ++++
4 files changed, 51 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index 721c1f8e892f..b9233b09b80f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -344,6 +344,7 @@ enum request_irq_err {
REQ_IRQ_ERR_ALL,
REQ_IRQ_ERR_TX,
REQ_IRQ_ERR_RX,
+ REQ_IRQ_ERR_SFTY,
REQ_IRQ_ERR_SFTY_UE,
REQ_IRQ_ERR_SFTY_CE,
REQ_IRQ_ERR_LPI,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 9f89acf31050..ca3d93851bed 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -31,6 +31,7 @@ struct stmmac_resources {
int wol_irq;
int lpi_irq;
int irq;
+ int sfty_irq;
int sfty_ce_irq;
int sfty_ue_irq;
int rx_irq[MTL_MAX_RX_QUEUES];
@@ -297,6 +298,7 @@ struct stmmac_priv {
void __iomem *ptpaddr;
void __iomem *estaddr;
unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+ int sfty_irq;
int sfty_ce_irq;
int sfty_ue_irq;
int rx_irq[MTL_MAX_RX_QUEUES];
@@ -305,6 +307,7 @@ struct stmmac_priv {
char int_name_mac[IFNAMSIZ + 9];
char int_name_wol[IFNAMSIZ + 9];
char int_name_lpi[IFNAMSIZ + 9];
+ char int_name_sfty[IFNAMSIZ + 10];
char int_name_sfty_ce[IFNAMSIZ + 10];
char int_name_sfty_ue[IFNAMSIZ + 10];
char int_name_rx_irq[MTL_MAX_TX_QUEUES][IFNAMSIZ + 14];
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 47de466e432c..e0192a282121 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3592,6 +3592,10 @@ static void stmmac_free_irq(struct net_device *dev,
if (priv->wol_irq > 0 && priv->wol_irq != dev->irq)
free_irq(priv->wol_irq, dev);
fallthrough;
+ case REQ_IRQ_ERR_SFTY:
+ if (priv->sfty_irq > 0 && priv->sfty_irq != dev->irq)
+ free_irq(priv->sfty_irq, dev);
+ fallthrough;
case REQ_IRQ_ERR_WOL:
free_irq(dev->irq, dev);
fallthrough;
@@ -3661,6 +3665,23 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
}
}
+ /* Request the common Safety Feature Correctible/Uncorrectible
+ * Error line in case of another line is used
+ */
+ if (priv->sfty_irq > 0 && priv->sfty_irq != dev->irq) {
+ int_name = priv->int_name_sfty;
+ sprintf(int_name, "%s:%s", dev->name, "safety");
+ ret = request_irq(priv->sfty_irq, stmmac_safety_interrupt,
+ 0, int_name, dev);
+ if (unlikely(ret < 0)) {
+ netdev_err(priv->dev,
+ "%s: alloc sfty MSI %d (error: %d)\n",
+ __func__, priv->sfty_irq, ret);
+ irq_err = REQ_IRQ_ERR_SFTY;
+ goto irq_error;
+ }
+ }
+
/* Request the Safety Feature Correctible Error line in
* case of another line is used
*/
@@ -3798,6 +3819,21 @@ static int stmmac_request_irq_single(struct net_device *dev)
}
}
+ /* Request the common Safety Feature Correctible/Uncorrectible
+ * Error line in case of another line is used
+ */
+ if (priv->sfty_irq > 0 && priv->sfty_irq != dev->irq) {
+ ret = request_irq(priv->sfty_irq, stmmac_safety_interrupt,
+ IRQF_SHARED, dev->name, dev);
+ if (unlikely(ret < 0)) {
+ netdev_err(priv->dev,
+ "%s: ERROR: allocating the sfty IRQ %d (%d)\n",
+ __func__, priv->sfty_irq, ret);
+ irq_err = REQ_IRQ_ERR_SFTY;
+ goto irq_error;
+ }
+ }
+
return 0;
irq_error:
@@ -6022,8 +6058,8 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
if (test_bit(STMMAC_DOWN, &priv->state))
return IRQ_HANDLED;
- /* Check if a fatal error happened */
- if (stmmac_safety_feat_interrupt(priv))
+ /* Check ASP error if it isn't delivered via an individual IRQ */
+ if (priv->sfty_irq <= 0 && stmmac_safety_feat_interrupt(priv))
return IRQ_HANDLED;
/* To handle Common interrupts */
@@ -7462,6 +7498,7 @@ int stmmac_dvr_probe(struct device *device,
priv->dev->irq = res->irq;
priv->wol_irq = res->wol_irq;
priv->lpi_irq = res->lpi_irq;
+ priv->sfty_irq = res->sfty_irq;
priv->sfty_ce_irq = res->sfty_ce_irq;
priv->sfty_ue_irq = res->sfty_ue_irq;
for (i = 0; i < MTL_MAX_RX_QUEUES; i++)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 70eadc83ca68..54797edc9b38 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -743,6 +743,14 @@ int stmmac_get_platform_resources(struct platform_device *pdev,
dev_info(&pdev->dev, "IRQ eth_lpi not found\n");
}
+ stmmac_res->sfty_irq =
+ platform_get_irq_byname_optional(pdev, "sfty");
+ if (stmmac_res->sfty_irq < 0) {
+ if (stmmac_res->sfty_irq == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ dev_info(&pdev->dev, "IRQ sfty not found\n");
+ }
+
stmmac_res->addr = devm_platform_ioremap_resource(pdev, 0);
return PTR_ERR_OR_ZERO(stmmac_res->addr);
--
2.25.1
next prev parent reply other threads:[~2024-01-30 12:04 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-30 12:03 [PATCH net-next v12 0/3] Ethernet common fault IRQ support Suraj Jaiswal
2024-01-30 12:03 ` [PATCH net-next v12 1/3] dt-bindings: net: qcom,ethqos: add binding doc for safety IRQ for sa8775p Suraj Jaiswal
2024-01-30 12:03 ` [PATCH net-next v12 2/3] arm64: dts: qcom: sa8775p: enable safety IRQ Suraj Jaiswal
2024-01-30 12:06 ` Krzysztof Kozlowski
2024-01-30 12:03 ` Suraj Jaiswal [this message]
2024-01-30 12:07 ` [PATCH net-next v12 0/3] Ethernet common fault IRQ support Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240130120306.4120632-4-quic_jsuraj@quicinc.com \
--to=quic_jsuraj@quicinc.com \
--cc=agross@kernel.org \
--cc=ahalaney@redhat.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andersson@kernel.org \
--cc=bhupesh.sharma@linaro.org \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=fancer.lancer@gmail.com \
--cc=joabreu@synopsys.com \
--cc=kernel@quicinc.com \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=psodagud@quicinc.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®