From: Chintan Vankar <c-vankar@ti.com>
To: Andrew Davis <afd@ti.com>, Peter Rosin <peda@axentia.se>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Conor Dooley <conor+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Rob Herring <robh+dt@kernel.org>, Tero Kristo <kristo@kernel.org>,
Vignesh Raghavendra <vigneshr@ti.com>, Nishanth Menon <nm@ti.com>
Cc: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <srk@ti.com>,
<s-vadapalli@ti.com>, <r-gunasekaran@ti.com>,
<danishanwar@ti.com>, Chintan Vankar <c-vankar@ti.com>
Subject: [PATCH v4 0/6] Add CPSW2G and CPSW9G nodes for J784S4
Date: Wed, 31 Jan 2024 15:44:35 +0530 [thread overview]
Message-ID: <20240131101441.1362409-1-c-vankar@ti.com> (raw)
This series adds device-tree nodes for CPSW2G and CPSW9G instance
of the CPSW Ethernet Switch on TI's J784S4 SoC. Additionally,
two device-tree overlays are also added:
1. QSGMII mode with the CPSW9G instance via the ENET EXPANSION 1
connector.
2. USXGMII mode with MAC Ports 1 and 2 of the CPSW9G instance via
ENET EXPANSION 1 and 2 connectors, configured in fixed-link
mode of operation at 5Gbps link speed.
Similar to Andrew Davis patch at:
https://lore.kernel.org/r/20231117222930.228688-5-afd@ti.com/ for J721E,
similar changes are also required for J784S4 to remove dependency on the
parent node being a syscon node.
This series combines the v1 series at:
https://lore.kernel.org/r/20230522092201.127598-1-s-vadapalli@ti.com/
and the patch for Main CPSW2G node that is present in [PATCH v6 2/5] at:
https://lore.kernel.org/r/20230721132029.123881-1-j-choudhary@ti.com/
but dropped in it's next version at:
https://lore.kernel.org/r/20231019054022.175163-1-j-choudhary@ti.com/
Link to v3: https://lore.kernel.org/r/20240125100501.4137977-1-c-vankar@ti.com/
Changes from v3 to v4:
1. Add alias for MCU CPSW2G node.
2. Add alias for Main CPSW2G node.
3. Add "ti,mac-only" property for CPSW9G node.
Chintan Vankar (2):
arm64: dts: ti: k3-j784s4-main: Fix mux-reg-masks in serdes_ln_ctrl
arm64: dts: ti: k3-j784s4: Add alias to MCU CPSW2G
Siddharth Vadapalli (4):
arm64: dts: ti: k3-j784s4-main: Add CPSW2G and CPSW9G nodes
arm64: dts: ti: k3-j784s4: Add Main CPSW2G node
arm64: dts: ti: k3-j784s4: Add overlay to enable QSGMII mode with
CPSW9G
arm64: dts: ti: k3-j784s4: Add overlay for dual port USXGMII mode
arch/arm64/boot/dts/ti/Makefile | 11 +-
.../ti/k3-j784s4-evm-quad-port-eth-exp1.dtso | 147 +++++++++++++
.../ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso | 81 +++++++
arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 50 +++++
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 198 +++++++++++++++++-
5 files changed, 480 insertions(+), 7 deletions(-)
create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-evm-quad-port-eth-exp1.dtso
create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso
--
2.34.1
next reply other threads:[~2024-01-31 10:14 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-31 10:14 Chintan Vankar [this message]
2024-01-31 10:14 ` [PATCH v4 1/6] arm64: dts: ti: k3-j784s4-main: Fix mux-reg-masks in serdes_ln_ctrl Chintan Vankar
2024-01-31 10:14 ` [PATCH v4 2/6] arm64: dts: ti: k3-j784s4: Add alias to MCU CPSW2G Chintan Vankar
2024-01-31 15:36 ` Andrew Davis
2024-03-11 10:44 ` Chintan Vankar
2024-03-19 15:35 ` Andrew Davis
2024-03-21 7:01 ` Chintan Vankar
2024-01-31 10:14 ` [PATCH v4 3/6] arm64: dts: ti: k3-j784s4-main: Add CPSW2G and CPSW9G nodes Chintan Vankar
2024-01-31 10:14 ` [PATCH v4 4/6] arm64: dts: ti: k3-j784s4: Add Main CPSW2G node Chintan Vankar
2024-01-31 15:41 ` Andrew Davis
2024-01-31 10:14 ` [PATCH v4 5/6] arm64: dts: ti: k3-j784s4: Add overlay to enable QSGMII mode with CPSW9G Chintan Vankar
2024-01-31 15:50 ` Andrew Davis
2024-03-11 10:49 ` Chintan Vankar
2024-01-31 10:14 ` [PATCH v4 6/6] arm64: dts: ti: k3-j784s4: Add overlay for dual port USXGMII mode Chintan Vankar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240131101441.1362409-1-c-vankar@ti.com \
--to=c-vankar@ti.com \
--cc=afd@ti.com \
--cc=conor+dt@kernel.org \
--cc=danishanwar@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=peda@axentia.se \
--cc=r-gunasekaran@ti.com \
--cc=robh+dt@kernel.org \
--cc=s-vadapalli@ti.com \
--cc=srk@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®