mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Armin Wolf <W_Armin@gmx.de>
To: dennisn@dennisn.mooo.com, lkml@vorpal.se, hdegoede@redhat.com,
	ilpo.jarvinen@linux.intel.com
Cc: coproscefalo@gmail.com, platform-driver-x86@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] platform/x86: toshiba_acpi: Add quirk for buttons on Z830
Date: Wed, 31 Jan 2024 12:16:41 +0100	[thread overview]
Message-ID: <20240131111641.4418-3-W_Armin@gmx.de> (raw)
In-Reply-To: <20240131111641.4418-1-W_Armin@gmx.de>

From: Arvid Norlander <lkml@vorpal.se>

The Z830 has some buttons that will only work properly as "quickstart"
buttons. To enable them in that mode, a value between 1 and 7 must be
used for HCI_HOTKEY_EVENT. Windows uses 0x5 on this laptop so use that for
maximum predictability and compatibility.

As there is not yet a known way of auto detection, this patch uses a DMI
quirk table. A module parameter is exposed to allow setting this on other
models for testing.

Signed-off-by: Arvid Norlander <lkml@vorpal.se>
---
 drivers/platform/x86/toshiba_acpi.c | 36 ++++++++++++++++++++++++++---
 1 file changed, 33 insertions(+), 3 deletions(-)

diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 291f14ef6702..2a5a651235fe 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -57,6 +57,11 @@ module_param(turn_on_panel_on_resume, int, 0644);
 MODULE_PARM_DESC(turn_on_panel_on_resume,
 	"Call HCI_PANEL_POWER_ON on resume (-1 = auto, 0 = no, 1 = yes");

+static int hci_hotkey_quickstart = -1;
+module_param(hci_hotkey_quickstart, int, 0644);
+MODULE_PARM_DESC(hci_hotkey_quickstart,
+		 "Call HCI_HOTKEY_EVENT with value 0x5 for quickstart button support (-1 = auto, 0 = no, 1 = yes");
+
 #define TOSHIBA_WMI_EVENT_GUID "59142400-C6A3-40FA-BADB-8A2652834100"

 /* Scan code for Fn key on TOS1900 models */
@@ -136,6 +141,7 @@ MODULE_PARM_DESC(turn_on_panel_on_resume,
 #define HCI_ACCEL_MASK			0x7fff
 #define HCI_ACCEL_DIRECTION_MASK	0x8000
 #define HCI_HOTKEY_DISABLE		0x0b
+#define HCI_HOTKEY_ENABLE_QUICKSTART	0x05
 #define HCI_HOTKEY_ENABLE		0x09
 #define HCI_HOTKEY_SPECIAL_FUNCTIONS	0x10
 #define HCI_LCD_BRIGHTNESS_BITS		3
@@ -2730,10 +2736,15 @@ static int toshiba_acpi_enable_hotkeys(struct toshiba_acpi_dev *dev)
 		return -ENODEV;

 	/*
+	 * Enable quickstart buttons if supported.
+	 *
 	 * Enable the "Special Functions" mode only if they are
 	 * supported and if they are activated.
 	 */
-	if (dev->kbd_function_keys_supported && dev->special_functions)
+	if (hci_hotkey_quickstart)
+		result = hci_write(dev, HCI_HOTKEY_EVENT,
+				   HCI_HOTKEY_ENABLE_QUICKSTART);
+	else if (dev->kbd_function_keys_supported && dev->special_functions)
 		result = hci_write(dev, HCI_HOTKEY_EVENT,
 				   HCI_HOTKEY_SPECIAL_FUNCTIONS);
 	else
@@ -3257,7 +3268,14 @@ static const char *find_hci_method(acpi_handle handle)
  * works. toshiba_acpi_resume() uses HCI_PANEL_POWER_ON to avoid changing
  * the configured brightness level.
  */
-static const struct dmi_system_id turn_on_panel_on_resume_dmi_ids[] = {
+#define QUIRK_TURN_ON_PANEL_ON_RESUME		BIT(0)
+/*
+ * Some Toshibas use "quickstart" keys. On these, HCI_HOTKEY_EVENT must use
+ * the value HCI_HOTKEY_ENABLE_QUICKSTART.
+ */
+#define QUIRK_HCI_HOTKEY_QUICKSTART		BIT(1)
+
+static const struct dmi_system_id toshiba_dmi_quirks[] = {
 	{
 	 /* Toshiba Portégé R700 */
 	 /* https://bugzilla.kernel.org/show_bug.cgi?id=21012 */
@@ -3265,6 +3283,7 @@ static const struct dmi_system_id turn_on_panel_on_resume_dmi_ids[] = {
 		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 		DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE R700"),
 		},
+	 .driver_data = (void *)QUIRK_TURN_ON_PANEL_ON_RESUME,
 	},
 	{
 	 /* Toshiba Satellite/Portégé R830 */
@@ -3274,6 +3293,7 @@ static const struct dmi_system_id turn_on_panel_on_resume_dmi_ids[] = {
 		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 		DMI_MATCH(DMI_PRODUCT_NAME, "R830"),
 		},
+	 .driver_data = (void *)QUIRK_TURN_ON_PANEL_ON_RESUME,
 	},
 	{
 	 /* Toshiba Satellite/Portégé Z830 */
@@ -3281,6 +3301,7 @@ static const struct dmi_system_id turn_on_panel_on_resume_dmi_ids[] = {
 		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 		DMI_MATCH(DMI_PRODUCT_NAME, "Z830"),
 		},
+	 .driver_data = (void *)(QUIRK_TURN_ON_PANEL_ON_RESUME | QUIRK_HCI_HOTKEY_QUICKSTART),
 	},
 };

@@ -3289,6 +3310,8 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
 	struct toshiba_acpi_dev *dev;
 	const char *hci_method;
 	u32 dummy;
+	const struct dmi_system_id *dmi_id;
+	long quirks = 0;
 	int ret = 0;

 	if (toshiba_acpi)
@@ -3441,8 +3464,15 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
 	}
 #endif

+	dmi_id = dmi_first_match(toshiba_dmi_quirks);
+	if (dmi_id)
+		quirks = (long)dmi_id->driver_data;
+
 	if (turn_on_panel_on_resume == -1)
-		turn_on_panel_on_resume = dmi_check_system(turn_on_panel_on_resume_dmi_ids);
+		turn_on_panel_on_resume = !!(quirks & QUIRK_TURN_ON_PANEL_ON_RESUME);
+
+	if (hci_hotkey_quickstart == -1)
+		hci_hotkey_quickstart = !!(quirks & QUIRK_HCI_HOTKEY_QUICKSTART);

 	toshiba_wwan_available(dev);
 	if (dev->wwan_supported)
--
2.39.2


  parent reply	other threads:[~2024-01-31 11:17 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-31 11:16 [PATCH 0/2] platform/x86: Add ACPI quickstart button driver Armin Wolf
2024-01-31 11:16 ` [PATCH 1/2] platform/x86: Add ACPI quickstart button (PNP0C32) driver Armin Wolf
2024-02-06 10:37   ` Ilpo Järvinen
2024-01-31 11:16 ` Armin Wolf [this message]
2024-03-24 14:55 ` [PATCH 0/2] platform/x86: Add ACPI quickstart button driver Hans de Goede
2024-03-25 20:01   ` Armin Wolf
2024-03-25 21:37   ` Arvid Norlander
2024-03-27 20:16 ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240131111641.4418-3-W_Armin@gmx.de \
    --to=w_armin@gmx.de \
    --cc=coproscefalo@gmail.com \
    --cc=dennisn@dennisn.mooo.com \
    --cc=hdegoede@redhat.com \
    --cc=ilpo.jarvinen@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lkml@vorpal.se \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®