mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Luca Weiss <luca.weiss@fairphone.com>
To: Neil Armstrong <neil.armstrong@linaro.org>,
	 Jessica Zhang <quic_jesszhan@quicinc.com>,
	Sam Ravnborg <sam@ravnborg.org>,
	 David Airlie <airlied@gmail.com>,
	Daniel Vetter <daniel@ffwll.ch>,
	 Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	 Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	 Rob Herring <robh+dt@kernel.org>,
	 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	 Konrad Dybcio <konrad.dybcio@linaro.org>,
	Andy Gross <agross@kernel.org>
Cc: ~postmarketos/upstreaming@lists.sr.ht,
	phone-devel@vger.kernel.org,  dri-devel@lists.freedesktop.org,
	devicetree@vger.kernel.org,  linux-kernel@vger.kernel.org,
	linux-arm-msm@vger.kernel.org,
	 Luca Weiss <luca.weiss@fairphone.com>
Subject: [PATCH v3 4/4] arm64: dts: qcom: sm7225-fairphone-fp4: Enable display and GPU
Date: Fri, 16 Feb 2024 11:10:51 +0100	[thread overview]
Message-ID: <20240216-fp4-panel-v3-4-a556e4b79640@fairphone.com> (raw)
In-Reply-To: <20240216-fp4-panel-v3-0-a556e4b79640@fairphone.com>

Add the description for the display panel found on this phone.
Unfortunately the LCDB module on PM6150L isn't yet supported upstream so
we need to use a dummy regulator-fixed in the meantime.

And with this done we can also enable the GPU and set the zap shader
firmware path.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 arch/arm64/boot/dts/qcom/sm6350.dtsi              |  2 +-
 arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 53 +++++++++++++++++++++++
 2 files changed, 54 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 5a05f14669be..c8099b10ddc4 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -1328,7 +1328,7 @@ gpu: gpu@3d00000 {
 
 			status = "disabled";
 
-			zap-shader {
+			gpu_zap_shader: zap-shader {
 				memory-region = <&pil_gpu_mem>;
 			};
 
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index ade619805519..4e61da8078d1 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -68,6 +68,14 @@ key-volume-up {
 		};
 	};
 
+	/* Dummy regulator until PM6150L has LCDB VSP/VSN support */
+	lcdb_dummy: regulator-lcdb-dummy {
+		compatible = "regulator-fixed";
+		regulator-name = "lcdb_dummy";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+	};
+
 	reserved-memory {
 		/*
 		 * The rmtfs memory region in downstream is 'dynamically allocated'
@@ -373,6 +381,14 @@ &gpi_dma1 {
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/sm7225/fairphone4/a615_zap.mbn";
+};
+
 &i2c0 {
 	clock-frequency = <400000>;
 	status = "okay";
@@ -404,6 +420,43 @@ &ipa {
 	status = "okay";
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l22a>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "djn,9a-3r063-1102b";
+		reg = <0>;
+
+		backlight = <&pm6150l_wled>;
+		reset-gpios = <&pm6150l_gpios 9 GPIO_ACTIVE_LOW>;
+
+		vdd1-supply = <&vreg_l1e>;
+		vsn-supply = <&lcdb_dummy>;
+		vsp-supply = <&lcdb_dummy>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l18a>;
+	status = "okay";
+};
+
 &mpss {
 	firmware-name = "qcom/sm7225/fairphone4/modem.mdt";
 	status = "okay";

-- 
2.43.2


  parent reply	other threads:[~2024-02-16 10:10 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-16 10:10 [PATCH v3 0/4] Add display support for Fairphone 4 Luca Weiss
2024-02-16 10:10 ` [PATCH v3 1/4] dt-bindings: display: panel: Add Himax HX83112A Luca Weiss
2024-02-16 10:10 ` [PATCH v3 2/4] drm/panel: Add driver for DJN HX83112A LCD panel Luca Weiss
2024-02-16 10:33   ` Neil Armstrong
2024-02-16 10:10 ` [PATCH v3 3/4] arm64: dts: qcom: sm6350: Remove "disabled" state of GMU Luca Weiss
2024-02-16 10:10 ` Luca Weiss [this message]
2024-02-16 11:14 ` (subset) [PATCH v3 0/4] Add display support for Fairphone 4 Neil Armstrong
2024-02-16 23:10 ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240216-fp4-panel-v3-4-a556e4b79640@fairphone.com \
    --to=luca.weiss@fairphone.com \
    --cc=agross@kernel.org \
    --cc=airlied@gmail.com \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mripard@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=phone-devel@vger.kernel.org \
    --cc=quic_jesszhan@quicinc.com \
    --cc=robh+dt@kernel.org \
    --cc=sam@ravnborg.org \
    --cc=tzimmermann@suse.de \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®