mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Francesco Dolcini <francesco@dolcini.it>
To: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>
Cc: Francesco Dolcini <francesco.dolcini@toradex.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Marco Felsch <m.felsch@pengutronix.de>,
	Roland Hieber <rhi@pengutronix.de>,
	Hiago De Franco <hiagofranco@gmail.com>
Subject: [PATCH v1] ARM: dts: imx7: remove DSI port endpoints
Date: Fri, 16 Feb 2024 11:42:55 +0100	[thread overview]
Message-ID: <20240216104255.21052-1-francesco@dolcini.it> (raw)

From: Francesco Dolcini <francesco.dolcini@toradex.com>

This fixes the display not working on colibri imx7, the driver fails to
load with the following error:

  mxsfb 30730000.lcdif: error -ENODEV: Cannot connect bridge

NXP i.MX7 LCDIF is connected to both the Parallel LCD Display and to a
MIPI DSI IP block, currently it's not possible to describe the
connection to both.

Remove the port endpoint from the SOC dtsi to prevent regressions, this
would need to be defined on the board DTS.

Reported-by: Hiago De Franco <hiagofranco@gmail.com>
Closes: https://lore.kernel.org/r/34yzygh3mbwpqr2re7nxmhyxy3s7qmqy4vhxvoyxnoguktriur@z66m7gvpqlia/
Fixes: edbbae7fba49 ("ARM: dts: imx7: add MIPI-DSI support")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
 arch/arm/boot/dts/nxp/imx/imx7s.dtsi | 26 --------------------------
 1 file changed, 26 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
index ebf7befcc11e..9c81c6baa2d3 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
@@ -834,16 +834,6 @@ lcdif: lcdif@30730000 {
 					<&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>;
 				clock-names = "pix", "axi";
 				status = "disabled";
-
-				port {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					lcdif_out_mipi_dsi: endpoint@0 {
-						reg = <0>;
-						remote-endpoint = <&mipi_dsi_in_lcdif>;
-					};
-				};
 			};
 
 			mipi_csi: mipi-csi@30750000 {
@@ -895,22 +885,6 @@ mipi_dsi: dsi@30760000 {
 				samsung,esc-clock-frequency = <20000000>;
 				samsung,pll-clock-frequency = <24000000>;
 				status = "disabled";
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						mipi_dsi_in_lcdif: endpoint@0 {
-							reg = <0>;
-							remote-endpoint = <&lcdif_out_mipi_dsi>;
-						};
-					};
-				};
 			};
 		};
 
-- 
2.39.2


             reply	other threads:[~2024-02-16 10:43 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-16 10:42 Francesco Dolcini [this message]
2024-02-23 17:19 ` Francesco Dolcini
2024-02-25  3:38   ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240216104255.21052-1-francesco@dolcini.it \
    --to=francesco@dolcini.it \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=francesco.dolcini@toradex.com \
    --cc=hiagofranco@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=m.felsch@pengutronix.de \
    --cc=rhi@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®