[PATCH 1/2] dt-bindings: media: i2c: add galaxycore,gc2145 DVP bus support

[Andrey Skvortsov <andrej.skvortzov@gmail.com>]

Don't require link-frequencies like it's done for ov5640, that
supports both CSI-2 and DVP. And v4l2_fwnode_endpoint_alloc_parse
ignores link-frequencies property for DVP endpoint. It's used only for
CSI-2 endpoints

Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
---
 .../bindings/media/i2c/galaxycore,gc2145.yaml | 33 +++++++++++++++++--
 1 file changed, 30 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml
index 1726ecca4c77..fb376b9d0f2a 100644
--- a/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml
@@ -61,9 +61,6 @@ properties:
         properties:
           link-frequencies: true
 
-        required:
-          - link-frequencies
-
     required:
       - endpoint
 
@@ -110,4 +107,34 @@ examples:
         };
     };
 
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@3c {
+            compatible = "galaxycore,gc2145";
+            reg = <0x3c>;
+            clocks = <&clk_ext_camera>;
+            iovdd-supply = <&scmi_v3v3_sw>;
+            avdd-supply = <&scmi_v3v3_sw>;
+            dvdd-supply = <&scmi_v3v3_sw>;
+            powerdown-gpios = <&mcp23017 3 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+            reset-gpios = <&mcp23017 4 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&parallel_from_gc2145>;
+                    bus-width = <8>;
+                    hsync-active = <1>;
+                    vsync-active = <1>;
+                    data-active = <1>;
+                    pclk-sample = <1>;
+                };
+            };
+        };
+    };
+
 ...
-- 
2.43.0