From: Xu Yang <xu.yang_2@nxp.com>
To: gregkh@linuxfoundation.org, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, shawnguo@kernel.org,
conor+dt@kernel.org
Cc: s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, linux-imx@nxp.com, peter.chen@kernel.org,
xu.yang_2@nxp.com, jun.li@nxp.com, linux-usb@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [RESEND v6 2/9] arm64: dts: imx8ulp: add usb nodes
Date: Wed, 21 Feb 2024 16:02:31 +0800 [thread overview]
Message-ID: <20240221080238.1615536-2-xu.yang_2@nxp.com> (raw)
In-Reply-To: <20240221080238.1615536-1-xu.yang_2@nxp.com>
Add USB nodes on i.MX8ULP platform which has 2 USB controllers.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
---
Changes in v2:
- no changes
Changes in v3:
- no changes
Changes in v4:
- no changes
Changes in v5:
- no changes
Changes in v6:
- drop usbphy aliases
---
arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 62 ++++++++++++++++++++++
1 file changed, 62 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index c4a0082f30d3..7da9461a5745 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -472,6 +472,68 @@ usdhc2: mmc@298f0000 {
status = "disabled";
};
+ usbotg1: usb@29900000 {
+ compatible = "fsl,imx8ulp-usb", "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
+ reg = <0x29900000 0x200>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc4 IMX8ULP_CLK_USB0>;
+ power-domains = <&scmi_devpd IMX8ULP_PD_USB0>;
+ phys = <&usbphy1>;
+ fsl,usbmisc = <&usbmisc1 0>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x8>;
+ rx-burst-size-dword = <0x8>;
+ status = "disabled";
+ };
+
+ usbmisc1: usbmisc@29900200 {
+ compatible = "fsl,imx8ulp-usbmisc", "fsl,imx7d-usbmisc",
+ "fsl,imx6q-usbmisc";
+ #index-cells = <1>;
+ reg = <0x29900200 0x200>;
+ status = "disabled";
+ };
+
+ usbphy1: usb-phy@29910000 {
+ compatible = "fsl,imx8ulp-usbphy", "fsl,imx7ulp-usbphy";
+ reg = <0x29910000 0x10000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc4 IMX8ULP_CLK_USB0_PHY>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ usbotg2: usb@29920000 {
+ compatible = "fsl,imx8ulp-usb", "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
+ reg = <0x29920000 0x200>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc4 IMX8ULP_CLK_USB1>;
+ power-domains = <&scmi_devpd IMX8ULP_PD_USDHC2_USB1>;
+ phys = <&usbphy2>;
+ fsl,usbmisc = <&usbmisc2 0>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x8>;
+ rx-burst-size-dword = <0x8>;
+ status = "disabled";
+ };
+
+ usbmisc2: usbmisc@29920200 {
+ compatible = "fsl,imx8ulp-usbmisc", "fsl,imx7d-usbmisc",
+ "fsl,imx6q-usbmisc";
+ #index-cells = <1>;
+ reg = <0x29920200 0x200>;
+ status = "disabled";
+ };
+
+ usbphy2: usb-phy@29930000 {
+ compatible = "fsl,imx8ulp-usbphy", "fsl,imx7ulp-usbphy";
+ reg = <0x29930000 0x10000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc4 IMX8ULP_CLK_USB1_PHY>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
fec: ethernet@29950000 {
compatible = "fsl,imx8ulp-fec", "fsl,imx6ul-fec", "fsl,imx6q-fec";
reg = <0x29950000 0x10000>;
--
2.34.1
next prev parent reply other threads:[~2024-02-21 8:02 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-21 8:02 [RESEND v6 1/9] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible Xu Yang
2024-02-21 8:02 ` Xu Yang [this message]
2024-02-21 8:02 ` [RESEND v6 3/9] arm64: dts: imx8ulp-evk: enable usb nodes and add ptn5150 nodes Xu Yang
2024-02-21 8:02 ` [RESEND v6 4/9] dt-bindings: usb: add NXP ChipIdea USB2 Controller schema Xu Yang
2024-02-24 12:03 ` Krzysztof Kozlowski
2024-02-21 8:02 ` [RESEND v6 5/9] dt-bindings: usb: ci-hdrc-usb2-imx: add restrictions for reg, interrupts, clock and clock-names properties Xu Yang
2024-02-24 12:03 ` Krzysztof Kozlowski
2024-02-21 8:02 ` [RESEND v6 6/9] dt-bindings: usb: ci-hdrc-usb2-imx: add compatible and clock-names restriction for imx93 Xu Yang
2024-02-21 8:02 ` [RESEND v6 7/9] arm64: dts: imx93: add usb nodes Xu Yang
2024-02-21 8:02 ` [RESEND v6 8/9] arm64: dts: imx93-11x11-evk: enable usb and typec nodes Xu Yang
2024-02-21 8:02 ` [RESEND v6 9/9] usb: chipidea: ci_hdrc_imx: align usb wakeup clock name with dt-bindings Xu Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240221080238.1615536-2-xu.yang_2@nxp.com \
--to=xu.yang_2@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jun.li@nxp.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=peter.chen@kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®