From: "Paweł Anikiel" <panikiel@google.com>
To: airlied@gmail.com, akpm@linux-foundation.org,
conor+dt@kernel.org, daniel@ffwll.ch, dinguyen@kernel.org,
hverkuil-cisco@xs4all.nl, krzysztof.kozlowski+dt@linaro.org,
maarten.lankhorst@linux.intel.com, mchehab@kernel.org,
mripard@kernel.org, robh+dt@kernel.org, tzimmermann@suse.de
Cc: devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
chromeos-krk-upstreaming@google.com, ribalda@chromium.org,
"Paweł Anikiel" <panikiel@google.com>
Subject: [PATCH v2 9/9] ARM: dts: chameleonv3: Add video device nodes
Date: Wed, 21 Feb 2024 16:02:15 +0000 [thread overview]
Message-ID: <20240221160215.484151-10-panikiel@google.com> (raw)
In-Reply-To: <20240221160215.484151-1-panikiel@google.com>
Add device nodes for the video system present on the Chameleon v3.
It consists of six framebuffers and two Intel Displayport receivers.
Signed-off-by: Paweł Anikiel <panikiel@google.com>
---
.../socfpga/socfpga_arria10_chameleonv3.dts | 152 ++++++++++++++++++
1 file changed, 152 insertions(+)
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_chameleonv3.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_chameleonv3.dts
index 422d00cd4c74..2f48f30cb538 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_chameleonv3.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_chameleonv3.dts
@@ -10,6 +10,158 @@ / {
compatible = "google,chameleon-v3", "enclustra,mercury-aa1",
"altr,socfpga-arria10", "altr,socfpga";
+ soc {
+ fb0: video@c0060500 {
+ compatible = "google,chv3-fb";
+ reg = <0xc0060500 0x100>,
+ <0xc0060f20 0x10>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ google,legacy-format;
+ };
+
+ fb_mst0: video@c0060600 {
+ compatible = "google,chv3-fb";
+ reg = <0xc0060600 0x100>,
+ <0xc0060f30 0x10>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+
+ port {
+ fb_mst0_0: endpoint {
+ remote-endpoint = <&dprx_mst_0>;
+ };
+ };
+ };
+
+ fb_mst1: video@c0060700 {
+ compatible = "google,chv3-fb";
+ reg = <0xc0060700 0x100>,
+ <0xc0060f40 0x10>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+
+ port {
+ fb_mst1_0: endpoint {
+ remote-endpoint = <&dprx_mst_1>;
+ };
+ };
+ };
+
+ fb_mst2: video@c0060800 {
+ compatible = "google,chv3-fb";
+ reg = <0xc0060800 0x100>,
+ <0xc0060f50 0x10>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+
+ port {
+ fb_mst2_0: endpoint {
+ remote-endpoint = <&dprx_mst_2>;
+ };
+ };
+ };
+
+ fb_mst3: video@c0060900 {
+ compatible = "google,chv3-fb";
+ reg = <0xc0060900 0x100>,
+ <0xc0060f60 0x10>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+
+ port {
+ fb_mst3_0: endpoint {
+ remote-endpoint = <&dprx_mst_3>;
+ };
+ };
+ };
+
+ fb_sst: video@c0060a00 {
+ compatible = "google,chv3-fb";
+ reg = <0xc0060a00 0x100>,
+ <0xc0060f70 0x10>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+
+ port {
+ fb_sst_0: endpoint {
+ remote-endpoint = <&dprx_sst_0>;
+ };
+ };
+ };
+
+ dprx_mst_irq: intc@c0060f80 {
+ compatible = "altr,pio-1.0";
+ reg = <0xc0060f80 0x10>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ altr,interrupt-type = <IRQ_TYPE_EDGE_RISING>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ dprx_sst_irq: intc@c0060fe0 {
+ compatible = "altr,pio-1.0";
+ reg = <0xc0060fe0 0x10>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ altr,interrupt-type = <IRQ_TYPE_EDGE_RISING>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ dprx_mst: dp-receiver@c0062000 {
+ compatible = "intel,dprx-20.0.1";
+ reg = <0xc0062000 0x800>;
+ interrupt-parent = <&dprx_mst_irq>;
+ interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+ intel,max-link-rate = <0x1e>;
+ intel,max-lane-count = <4>;
+ intel,multi-stream-support;
+ intel,max-stream-count = <4>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dprx_mst_0: endpoint {
+ remote-endpoint = <&fb_mst0_0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dprx_mst_1: endpoint {
+ remote-endpoint = <&fb_mst1_0>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ dprx_mst_2: endpoint {
+ remote-endpoint = <&fb_mst2_0>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ dprx_mst_3: endpoint {
+ remote-endpoint = <&fb_mst3_0>;
+ };
+ };
+ };
+ };
+
+ dprx_sst: dp-receiver@c0064000 {
+ compatible = "intel,dprx-20.0.1";
+ reg = <0xc0064000 0x800>;
+ interrupt-parent = <&dprx_sst_irq>;
+ interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+ intel,max-link-rate = <0x1e>;
+ intel,max-lane-count = <4>;
+
+ port {
+ dprx_sst_0: endpoint {
+ remote-endpoint = <&fb_sst_0>;
+ };
+ };
+ };
+ };
+
aliases {
serial0 = &uart0;
i2c0 = &i2c0;
--
2.44.0.rc0.258.g7320e95886-goog
next prev parent reply other threads:[~2024-02-21 16:02 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-21 16:02 [PATCH v2 0/9] Add Chameleon v3 video support Paweł Anikiel
2024-02-21 16:02 ` [PATCH v2 1/9] media: v4l2-subdev: Add a pad variant of .query_dv_timings() Paweł Anikiel
2024-02-28 11:25 ` Hans Verkuil
2024-02-28 15:34 ` Paweł Anikiel
2024-02-29 8:02 ` Hans Verkuil
2024-02-29 11:33 ` Paweł Anikiel
2024-02-29 12:05 ` Hans Verkuil
2024-02-21 16:02 ` [PATCH v2 2/9] media: Add Chameleon v3 framebuffer driver Paweł Anikiel
2024-02-28 11:24 ` Hans Verkuil
2024-02-28 15:08 ` Paweł Anikiel
2024-02-28 15:14 ` Hans Verkuil
2024-02-21 16:02 ` [PATCH v2 3/9] drm/dp_mst: Move DRM-independent structures to separate header Paweł Anikiel
2024-02-21 16:02 ` [PATCH v2 4/9] lib: Move DisplayPort CRC functions to common lib Paweł Anikiel
2024-02-21 16:02 ` [PATCH v2 5/9] drm/display: Add mask definitions for DP_PAYLOAD_ALLOCATE_* registers Paweł Anikiel
2024-02-21 16:02 ` [PATCH v2 6/9] media: intel: Add Displayport RX IP driver Paweł Anikiel
2024-02-28 12:11 ` Hans Verkuil
2024-02-21 16:02 ` [PATCH v2 7/9] media: dt-bindings: Add Chameleon v3 framebuffer Paweł Anikiel
2024-02-26 9:10 ` Krzysztof Kozlowski
2024-04-23 17:00 ` Paweł Anikiel
2024-02-21 16:02 ` [PATCH v2 8/9] media: dt-bindings: Add Intel Displayport RX IP Paweł Anikiel
2024-02-26 9:12 ` Krzysztof Kozlowski
2024-02-26 10:59 ` Paweł Anikiel
2024-02-26 12:06 ` Krzysztof Kozlowski
2024-02-26 12:43 ` Paweł Anikiel
2024-02-26 17:29 ` Krzysztof Kozlowski
2024-02-27 13:11 ` Paweł Anikiel
2024-02-27 14:24 ` Rob Herring
2024-02-27 14:29 ` Rob Herring
2024-02-28 11:05 ` Paweł Anikiel
2024-02-28 12:18 ` Krzysztof Kozlowski
2024-02-28 13:09 ` Paweł Anikiel
2024-02-28 18:09 ` Rob Herring
2024-02-29 10:25 ` Paweł Anikiel
2024-03-01 16:26 ` Rob Herring
2024-02-21 16:02 ` Paweł Anikiel [this message]
2024-02-26 9:15 ` [PATCH v2 9/9] ARM: dts: chameleonv3: Add video device nodes Krzysztof Kozlowski
2024-02-26 11:09 ` Paweł Anikiel
2024-02-26 12:07 ` Krzysztof Kozlowski
2024-02-26 12:27 ` Paweł Anikiel
2024-02-26 17:30 ` Krzysztof Kozlowski
2024-02-27 11:26 ` Paweł Anikiel
2024-02-23 19:04 ` [PATCH v2 0/9] Add Chameleon v3 video support Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240221160215.484151-10-panikiel@google.com \
--to=panikiel@google.com \
--cc=airlied@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=chromeos-krk-upstreaming@google.com \
--cc=conor+dt@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dinguyen@kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mchehab@kernel.org \
--cc=mripard@kernel.org \
--cc=ribalda@chromium.org \
--cc=robh+dt@kernel.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®