From: RD Babiera <rdbabiera@google.com>
To: rdbabiera@google.com, linux@roeck-us.net,
heikki.krogerus@linux.intel.com, gregkh@linuxfoundation.org
Cc: badhri@google.com, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org,
Dan Carpenter <dan.carpenter@linaro.org>
Subject: [PATCH v1] usb: typec: tcpm: fix SOP' sequences in tcpm_pd_svdm
Date: Fri, 23 Feb 2024 00:22:34 +0000 [thread overview]
Message-ID: <20240223002233.3936275-2-rdbabiera@google.com> (raw)
The Smatch checker flags svdm_version being uninitialized for Discover
Identity Messages within tcpm_pd_svdm for the CMDT_INIT case. Cable plugs
cannot initialize SVDM commands, however a port partner that isn't allowed
to communicate over SOP' could, which would result in the CMDT_INIT block
running for a received SOP' message.
First, initialize svdm_version for the TCPC_TX_SOP_PRIME case. If the
svdm_version returns as an error, we expect the received svdm to be the
result of Discover Identity that updates the value accordingly.
Next, drop all SOP' messages of type CMDT_INIT within tcpm_pd_svdm.
Finally, remove redundant call that assigns modep and pdev. Smatch will
raise an uninitialized symbol error over modep_prime and pdev_prime, but
both the assignment and use of these variables are guarded behind
a check for rx_sop_type == TCPC_TX_SOP_PRIME.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/a432603b-b801-4001-b309-247dded707d3@moroto.mountain/
Fixes: fb7ff25ae433 ("usb: typec: tcpm: add discover identity support for SOP'")
Signed-off-by: RD Babiera <rdbabiera@google.com>
---
drivers/usb/typec/tcpm/tcpm.c | 26 ++++++++++++++++----------
1 file changed, 16 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index d975fc525eac..55c438c62203 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -1878,11 +1878,6 @@ static int tcpm_pd_svdm(struct tcpm_port *port, struct typec_altmode *adev,
tcpm_log(port, "Rx VDM cmd 0x%x type %d cmd %d len %d",
p[0], cmd_type, cmd, cnt);
- modep = &port->mode_data;
-
- pdev = typec_match_altmode(port->partner_altmode, ALTMODE_DISCOVERY_MAX,
- PD_VDO_VID(p[0]), PD_VDO_OPOS(p[0]));
-
switch (rx_sop_type) {
case TCPC_TX_SOP_PRIME:
modep_prime = &port->mode_data_prime;
@@ -1890,11 +1885,13 @@ static int tcpm_pd_svdm(struct tcpm_port *port, struct typec_altmode *adev,
ALTMODE_DISCOVERY_MAX,
PD_VDO_VID(p[0]),
PD_VDO_OPOS(p[0]));
- if (!IS_ERR_OR_NULL(port->cable)) {
- svdm_version = typec_get_cable_svdm_version(typec);
- if (PD_VDO_SVDM_VER(p[0]) < svdm_version)
- typec_cable_set_svdm_version(port->cable, svdm_version);
- }
+ svdm_version = typec_get_cable_svdm_version(typec);
+ /*
+ * Update SVDM version if cable was discovered before port partner.
+ */
+ if (!IS_ERR_OR_NULL(port->cable) &&
+ PD_VDO_SVDM_VER(p[0]) < svdm_version)
+ typec_cable_set_svdm_version(port->cable, svdm_version);
break;
case TCPC_TX_SOP:
modep = &port->mode_data;
@@ -1920,6 +1917,15 @@ static int tcpm_pd_svdm(struct tcpm_port *port, struct typec_altmode *adev,
switch (cmd_type) {
case CMDT_INIT:
+ /*
+ * Only the port or port partner is allowed to initialize SVDM
+ * commands over SOP'. In case the port partner initializes a
+ * sequence when it is not allowed to send SOP' messages, drop
+ * the message should the TCPM port try to process it.
+ */
+ if (rx_sop_type == TCPC_TX_SOP_PRIME)
+ return 0;
+
switch (cmd) {
case CMD_DISCOVER_IDENT:
if (PD_VDO_VID(p[0]) != USB_SID_PD)
base-commit: 3bf0514dc6f36f81ee11b1becd977cb87b4c90c6
--
2.44.0.rc0.258.g7320e95886-goog
next reply other threads:[~2024-02-23 0:22 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-23 0:22 RD Babiera [this message]
2024-02-26 8:16 ` Heikki Krogerus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240223002233.3936275-2-rdbabiera@google.com \
--to=rdbabiera@google.com \
--cc=badhri@google.com \
--cc=dan.carpenter@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®