From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Cc: Stefan Klug <stefan.klug@ideasonboard.com>,
libcamera-devel@lists.libcamera.org, linux-media@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Rui Miguel Silva <rmfrfs@gmail.com>,
Martin Kepplinger <martink@posteo.de>,
Purism Kernel Team <kernel@puri.sm>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>
Subject: Re: [PATCH] mipi-csis: Emit V4L2_EVENT_FRAME_SYNC events
Date: Wed, 13 Mar 2024 23:10:10 +0200 [thread overview]
Message-ID: <20240313195408.GE8399@pendragon.ideasonboard.com> (raw)
In-Reply-To: <axrx5ynlyoyjgkhj3j4r5b6xfaxwetx4c7u5ngq5wunin5ynv6@qmvav4y3xczq>
On Wed, Mar 13, 2024 at 05:49:12PM +0100, Jacopo Mondi wrote:
> Hi Stefan
>
> In Subject: missing the 'media:' prefix
>
> On Wed, Mar 13, 2024 at 04:30:58PM +0100, Stefan Klug wrote:
> > The Samsung CSIS Mipi receiver provides a start-of-frame interrupt and
>
> s/Mipi/MIPI/
>
> > a framecount register. As the CSI receiver is the hardware unit
> > that lies closest to the sensor, the frame counter is the best we can
> > get on these devices.
Nitpicking: if you intended to start a new paragraph, add a blank line.
If not, don't add a line break between sentences.
> > In case of the ISI available on the i.MX8 M Plus it is also the only
> > native start-of-frame signal available.
> >
> > This patch exposes the sof interrupt and the framecount as
> > V4L2_EVENT_FRAME_SYNC event on the subdevice.
> >
> > It was tested on a Debix-Som-A with a 6.8-rc4 kernel.
> >
> > Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
> > ---
> > drivers/media/platform/nxp/imx-mipi-csis.c | 34 +++++++++++++++++++++-
> > 1 file changed, 33 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/media/platform/nxp/imx-mipi-csis.c b/drivers/media/platform/nxp/imx-mipi-csis.c
> > index db8ff5f5c4d3..caeb1622f741 100644
> > --- a/drivers/media/platform/nxp/imx-mipi-csis.c
> > +++ b/drivers/media/platform/nxp/imx-mipi-csis.c
> > @@ -30,6 +30,7 @@
> >
> > #include <media/v4l2-common.h>
> > #include <media/v4l2-device.h>
> > +#include <media/v4l2-event.h>
> > #include <media/v4l2-fwnode.h>
> > #include <media/v4l2-mc.h>
> > #include <media/v4l2-subdev.h>
> > @@ -742,6 +743,18 @@ static void mipi_csis_stop_stream(struct mipi_csis_device *csis)
> > mipi_csis_system_enable(csis, false);
> > }
> >
> > +static void mipi_csis_queue_event_sof(struct mipi_csis_device *csis)
> > +{
> > + struct v4l2_event event = {
> > + .type = V4L2_EVENT_FRAME_SYNC,
> > + };
> > +
No need for a blank line.
> > + u32 frame = mipi_csis_read(csis, MIPI_CSIS_FRAME_COUNTER_CH(0));
> > +
> > + event.u.frame_sync.frame_sequence = frame;
> > + v4l2_event_queue(csis->sd.devnode, &event);
> > +}
> > +
> > static irqreturn_t mipi_csis_irq_handler(int irq, void *dev_id)
> > {
> > struct mipi_csis_device *csis = dev_id;
> > @@ -765,6 +778,10 @@ static irqreturn_t mipi_csis_irq_handler(int irq, void *dev_id)
> > event->counter++;
> > }
> > }
> > +
> > + if (status & MIPI_CSIS_INT_SRC_FRAME_START)
> > + mipi_csis_queue_event_sof(csis);
> > +
> > spin_unlock_irqrestore(&csis->slock, flags);
> >
> > mipi_csis_write(csis, MIPI_CSIS_INT_SRC, status);
> > @@ -1154,8 +1171,23 @@ static int mipi_csis_log_status(struct v4l2_subdev *sd)
> > return 0;
> > }
> >
> > +static int mipi_csis_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
> > + struct v4l2_event_subscription *sub)
>
> Please align to open ( on the previous line
>
> All minors, with the above fixed
> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
If you don't want to send a v2, I can address the minor comments when
applying this to my tree. Please let me know what you prefer.
> > +{
> > + if (sub->type != V4L2_EVENT_FRAME_SYNC)
> > + return -EINVAL;
> > +
> > + /* V4L2_EVENT_FRAME_SYNC doesn't require an id, so zero should be set */
> > + if (sub->id != 0)
> > + return -EINVAL;
> > +
> > + return v4l2_event_subscribe(fh, sub, 0, NULL);
> > +}
> > +
> > static const struct v4l2_subdev_core_ops mipi_csis_core_ops = {
> > .log_status = mipi_csis_log_status,
> > + .subscribe_event = mipi_csis_subscribe_event,
> > + .unsubscribe_event = v4l2_event_subdev_unsubscribe,
> > };
> >
> > static const struct v4l2_subdev_video_ops mipi_csis_video_ops = {
> > @@ -1358,7 +1390,7 @@ static int mipi_csis_subdev_init(struct mipi_csis_device *csis)
> > snprintf(sd->name, sizeof(sd->name), "csis-%s",
> > dev_name(csis->dev));
> >
> > - sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> > + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
> > sd->ctrl_handler = NULL;
> >
> > sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2024-03-13 21:10 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-13 15:30 Stefan Klug
2024-03-13 16:49 ` Jacopo Mondi
2024-03-13 21:10 ` Laurent Pinchart [this message]
2024-03-13 19:12 ` Umang Jain
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240313195408.GE8399@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=festevam@gmail.com \
--cc=jacopo.mondi@ideasonboard.com \
--cc=kernel@pengutronix.de \
--cc=kernel@puri.sm \
--cc=libcamera-devel@lists.libcamera.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=martink@posteo.de \
--cc=mchehab@kernel.org \
--cc=rmfrfs@gmail.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=stefan.klug@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®