mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: George Stark <gnstark@salutedevices.com>
To: <andy.shevchenko@gmail.com>, <pavel@ucw.cz>, <lee@kernel.org>,
	<vadimp@nvidia.com>, <christophe.leroy@csgroup.eu>,
	<hdegoede@redhat.com>, <mazziesaccount@gmail.com>,
	<peterz@infradead.org>, <mingo@redhat.com>, <will@kernel.org>,
	<longman@redhat.com>, <boqun.feng@gmail.com>,
	<nikitos.tr@gmail.com>, <marek.behun@nic.cz>, <kabel@kernel.org>
Cc: <linux-leds@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<kernel@salutedevices.com>,
	George Stark <gnstark@salutedevices.com>,
	Nikita Travkin <nikita@trvn.ru>
Subject: [PATCH v7 2/8] leds: aw2013: use devm API to cleanup module's resources
Date: Thu, 14 Mar 2024 23:18:50 +0300	[thread overview]
Message-ID: <20240314201856.1991899-3-gnstark@salutedevices.com> (raw)
In-Reply-To: <20240314201856.1991899-1-gnstark@salutedevices.com>

In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses resources which were destroyed already
in module's remove() so use devm API instead of remove().

Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Nikita Travkin <nikita@trvn.ru>
---
 drivers/leds/leds-aw2013.c | 25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/drivers/leds/leds-aw2013.c b/drivers/leds/leds-aw2013.c
index 17235a5e576a..6475eadcb0df 100644
--- a/drivers/leds/leds-aw2013.c
+++ b/drivers/leds/leds-aw2013.c
@@ -320,6 +320,11 @@ static int aw2013_probe_dt(struct aw2013 *chip)
 	return 0;
 }
 
+static void aw2013_chip_disable_action(void *data)
+{
+	aw2013_chip_disable(data);
+}
+
 static const struct regmap_config aw2013_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -336,7 +341,10 @@ static int aw2013_probe(struct i2c_client *client)
 	if (!chip)
 		return -ENOMEM;
 
-	mutex_init(&chip->mutex);
+	ret = devm_mutex_init(&client->dev, &chip->mutex);
+	if (ret)
+		return ret;
+
 	mutex_lock(&chip->mutex);
 
 	chip->client = client;
@@ -384,6 +392,10 @@ static int aw2013_probe(struct i2c_client *client)
 		goto error_reg;
 	}
 
+	ret = devm_add_action(&client->dev, aw2013_chip_disable_action, chip);
+	if (ret)
+		goto error_reg;
+
 	ret = aw2013_probe_dt(chip);
 	if (ret < 0)
 		goto error_reg;
@@ -406,19 +418,9 @@ static int aw2013_probe(struct i2c_client *client)
 
 error:
 	mutex_unlock(&chip->mutex);
-	mutex_destroy(&chip->mutex);
 	return ret;
 }
 
-static void aw2013_remove(struct i2c_client *client)
-{
-	struct aw2013 *chip = i2c_get_clientdata(client);
-
-	aw2013_chip_disable(chip);
-
-	mutex_destroy(&chip->mutex);
-}
-
 static const struct of_device_id aw2013_match_table[] = {
 	{ .compatible = "awinic,aw2013", },
 	{ /* sentinel */ },
@@ -432,7 +434,6 @@ static struct i2c_driver aw2013_driver = {
 		.of_match_table = aw2013_match_table,
 	},
 	.probe = aw2013_probe,
-	.remove = aw2013_remove,
 };
 
 module_i2c_driver(aw2013_driver);
-- 
2.25.1


  parent reply	other threads:[~2024-03-14 20:19 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-14 20:18 [PATCH v7 0/8] devm_led_classdev_register() usage problem George Stark
2024-03-14 20:18 ` [PATCH v7 1/8] locking/mutex: introduce devm_mutex_init() George Stark
2024-03-14 23:33   ` Andy Shevchenko
2024-03-14 20:18 ` George Stark [this message]
2024-03-14 20:18 ` [PATCH v7 3/8] leds: aw200xx: use devm API to cleanup module's resources George Stark
2024-03-14 20:18 ` [PATCH v7 4/8] leds: lp3952: " George Stark
2024-03-14 23:36   ` Andy Shevchenko
2024-03-14 20:18 ` [PATCH v7 5/8] leds: lm3532: " George Stark
2024-03-14 20:18 ` [PATCH v7 6/8] leds: nic78bx: " George Stark
2024-03-14 20:18 ` [PATCH v7 7/8] leds: mlxreg: use devm_mutex_init() for mutex initialization George Stark
2024-03-14 20:18 ` [PATCH v7 8/8] leds: an30259a: " George Stark
2024-03-21 18:11 ` [PATCH v7 0/8] devm_led_classdev_register() usage problem Lee Jones
2024-03-22 10:19   ` George Stark
2024-03-22 10:43     ` Lee Jones
2024-03-29 13:43       ` George Stark
2024-04-11 13:45         ` Lee Jones
2024-04-11 14:20           ` George Stark
2024-04-11 10:59 ` Lee Jones
2024-04-11 11:00   ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240314201856.1991899-3-gnstark@salutedevices.com \
    --to=gnstark@salutedevices.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=boqun.feng@gmail.com \
    --cc=christophe.leroy@csgroup.eu \
    --cc=hdegoede@redhat.com \
    --cc=kabel@kernel.org \
    --cc=kernel@salutedevices.com \
    --cc=lee@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=longman@redhat.com \
    --cc=marek.behun@nic.cz \
    --cc=mazziesaccount@gmail.com \
    --cc=mingo@redhat.com \
    --cc=nikita@trvn.ru \
    --cc=nikitos.tr@gmail.com \
    --cc=pavel@ucw.cz \
    --cc=peterz@infradead.org \
    --cc=vadimp@nvidia.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®