From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Bjorn Andersson <andersson@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
cros-qcom-dts-watchers@chromium.org
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Konrad Dybcio <konrad.dybcio@linaro.org>
Subject: [PATCH 26/31] arm64: dts: qcom: sm8150-*: Remove thermal zone polling delays
Date: Tue, 19 Mar 2024 17:13:56 +0100 [thread overview]
Message-ID: <20240319-topic-msm-polling-cleanup-v1-26-e0aee1dbcd78@linaro.org> (raw)
In-Reply-To: <20240319-topic-msm-polling-cleanup-v1-0-e0aee1dbcd78@linaro.org>
All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
arch/arm64/boot/dts/qcom/pm8150.dtsi | 3 --
arch/arm64/boot/dts/qcom/pm8150b.dtsi | 3 --
arch/arm64/boot/dts/qcom/pm8150l.dtsi | 3 --
arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi | 3 --
arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi | 3 --
arch/arm64/boot/dts/qcom/sm8150.dtsi | 84 -------------------------------
6 files changed, 99 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
index 3ba3ba5d8fce..72343fc80a47 100644
--- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -12,9 +12,6 @@
/ {
thermal-zones {
pm8150-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
-
thermal-sensors = <&pm8150_temp>;
trips {
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index 1aee3270ce7b..f75e9817de85 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -11,9 +11,6 @@
/ {
thermal-zones {
pm8150b-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
-
thermal-sensors = <&pm8150b_temp>;
trips {
diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
index ac08a09c64c2..b9e0c8af5c48 100644
--- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
@@ -11,9 +11,6 @@
/ {
thermal-zones {
pm8150l-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
-
thermal-sensors = <&pm8150l_temp>;
trips {
diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi
index dbd4b91dfe06..a25927eba785 100644
--- a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi
@@ -11,9 +11,6 @@
/ {
thermal-zones {
pmm8155au-1-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
-
thermal-sensors = <&pmm8155au_1_temp>;
trips {
diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi
index 1cee20ac2c9c..6c370d0e4938 100644
--- a/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi
@@ -10,9 +10,6 @@
/ {
thermal-zones {
pmm8155au-2-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
-
thermal-sensors = <&pmm8155au_2_temp>;
trips {
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index a35c0852b5a1..a2ee7bfe03e1 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -4556,9 +4556,6 @@ timer {
thermal-zones {
cpu0-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 1>;
trips {
@@ -4600,9 +4597,6 @@ map1 {
};
cpu1-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 2>;
trips {
@@ -4644,9 +4638,6 @@ map1 {
};
cpu2-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 3>;
trips {
@@ -4688,9 +4679,6 @@ map1 {
};
cpu3-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 4>;
trips {
@@ -4732,9 +4720,6 @@ map1 {
};
cpu4-top-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 7>;
trips {
@@ -4776,9 +4761,6 @@ map1 {
};
cpu5-top-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 8>;
trips {
@@ -4820,9 +4802,6 @@ map1 {
};
cpu6-top-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 9>;
trips {
@@ -4864,9 +4843,6 @@ map1 {
};
cpu7-top-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 10>;
trips {
@@ -4908,9 +4884,6 @@ map1 {
};
cpu4-bottom-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 11>;
trips {
@@ -4952,9 +4925,6 @@ map1 {
};
cpu5-bottom-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 12>;
trips {
@@ -4996,9 +4966,6 @@ map1 {
};
cpu6-bottom-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 13>;
trips {
@@ -5040,9 +5007,6 @@ map1 {
};
cpu7-bottom-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 14>;
trips {
@@ -5084,9 +5048,6 @@ map1 {
};
aoss0-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 0>;
trips {
@@ -5099,9 +5060,6 @@ aoss0_alert0: trip-point0 {
};
cluster0-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 5>;
trips {
@@ -5119,9 +5077,6 @@ cluster0_crit: cluster0-crit {
};
cluster1-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 6>;
trips {
@@ -5139,9 +5094,6 @@ cluster1_crit: cluster1-crit {
};
gpu-top-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 15>;
cooling-maps {
@@ -5161,9 +5113,6 @@ gpu_top_alert0: trip-point0 {
};
aoss1-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens1 0>;
trips {
@@ -5176,9 +5125,6 @@ aoss1_alert0: trip-point0 {
};
wlan-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens1 1>;
trips {
@@ -5191,9 +5137,6 @@ wlan_alert0: trip-point0 {
};
video-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens1 2>;
trips {
@@ -5206,9 +5149,6 @@ video_alert0: trip-point0 {
};
mem-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens1 3>;
trips {
@@ -5221,9 +5161,6 @@ mem_alert0: trip-point0 {
};
q6-hvx-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens1 4>;
trips {
@@ -5236,9 +5173,6 @@ q6_hvx_alert0: trip-point0 {
};
camera-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens1 5>;
trips {
@@ -5251,9 +5185,6 @@ camera_alert0: trip-point0 {
};
compute-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens1 6>;
trips {
@@ -5266,9 +5197,6 @@ compute_alert0: trip-point0 {
};
modem-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens1 7>;
trips {
@@ -5281,9 +5209,6 @@ modem_alert0: trip-point0 {
};
npu-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens1 8>;
trips {
@@ -5296,9 +5221,6 @@ npu_alert0: trip-point0 {
};
modem-vec-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens1 9>;
trips {
@@ -5311,9 +5233,6 @@ modem_vec_alert0: trip-point0 {
};
modem-scl-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens1 10>;
trips {
@@ -5326,9 +5245,6 @@ modem_scl_alert0: trip-point0 {
};
gpu-bottom-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens1 11>;
cooling-maps {
--
2.40.1
next prev parent reply other threads:[~2024-03-19 16:14 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-19 16:13 [PATCH 00/31] Clean up thermal zone polling-delay Konrad Dybcio
2024-03-19 16:13 ` [PATCH 01/31] arm64: dts: qcom: ipq6018-*: Remove thermal zone polling delays Konrad Dybcio
2024-03-19 16:13 ` [PATCH 02/31] arm64: dts: qcom: ipq8074-*: " Konrad Dybcio
2024-03-19 16:13 ` [PATCH 03/31] arm64: dts: qcom: ipq9574-*: " Konrad Dybcio
2024-03-20 10:03 ` Varadarajan Narayanan
2024-03-19 16:13 ` [PATCH 04/31] arm64: dts: qcom: msm8916-*: " Konrad Dybcio
2024-03-19 16:13 ` [PATCH 05/31] arm64: dts: qcom: msm8939-*: " Konrad Dybcio
2024-03-19 16:13 ` [PATCH 06/31] arm64: dts: qcom: msm8953-*: " Konrad Dybcio
2024-03-19 16:13 ` [PATCH 07/31] arm64: dts: qcom: msm8976-*: " Konrad Dybcio
2024-03-19 16:13 ` [PATCH 08/31] arm64: dts: qcom: msm8996-*: " Konrad Dybcio
2024-03-19 16:13 ` [PATCH 09/31] arm64: dts: qcom: msm8998-*: " Konrad Dybcio
2024-03-19 16:13 ` [PATCH 10/31] arm64: dts: qcom: pm7550ba: " Konrad Dybcio
2024-03-19 16:13 ` [PATCH 11/31] arm64: dts: qcom: pms405: " Konrad Dybcio
2024-03-19 16:13 ` [PATCH 12/31] arm64: dts: qcom: pmx75: " Konrad Dybcio
2024-03-19 16:13 ` [PATCH 13/31] arm64: dts: qcom: qcm2290-*: " Konrad Dybcio
2024-03-19 16:13 ` [PATCH 14/31] arm64: dts: qcom: qcs404-*: " Konrad Dybcio
2024-03-19 16:13 ` [PATCH 15/31] arm64: dts: qcom: sa8775p-*: " Konrad Dybcio
2024-03-19 16:13 ` [PATCH 16/31] arm64: dts: qcom: sc7180-*: " Konrad Dybcio
2024-03-19 16:13 ` [PATCH 17/31] arm64: dts: qcom: sc7280-*: " Konrad Dybcio
2024-03-19 16:13 ` [PATCH 18/31] arm64: dts: qcom: sc8180x-*: " Konrad Dybcio
2024-03-19 16:13 ` [PATCH 19/31] arm64: dts: qcom: sc8280xp-*: " Konrad Dybcio
2024-03-19 16:13 ` [PATCH 20/31] arm64: dts: qcom: sdm660-*: " Konrad Dybcio
2024-03-19 16:13 ` [PATCH 21/31] arm64: dts: qcom: sdm845-*: " Konrad Dybcio
2024-03-19 16:13 ` [PATCH 22/31] arm64: dts: qcom: sm6115-*: " Konrad Dybcio
2024-03-19 16:13 ` [PATCH 23/31] arm64: dts: qcom: sm6125-*: " Konrad Dybcio
2024-03-19 16:13 ` [PATCH 24/31] arm64: dts: qcom: sm6350-*: " Konrad Dybcio
2024-03-19 16:13 ` [PATCH 25/31] arm64: dts: qcom: sm6375-*: " Konrad Dybcio
2024-03-19 16:13 ` Konrad Dybcio [this message]
2024-03-19 16:13 ` [PATCH 27/31] arm64: dts: qcom: sm8250-*: " Konrad Dybcio
2024-03-19 16:13 ` [PATCH 28/31] arm64: dts: qcom: sm8350-*: " Konrad Dybcio
2024-03-19 16:13 ` [PATCH 29/31] arm64: dts: qcom: sm8450-*: " Konrad Dybcio
2024-03-19 16:14 ` [PATCH 30/31] arm64: dts: qcom: sm8550-*: " Konrad Dybcio
2024-03-19 16:14 ` [PATCH 31/31] arm64: dts: qcom: sm8650-*: " Konrad Dybcio
2024-03-19 16:43 ` [PATCH 00/31] Clean up thermal zone polling-delay Johan Hovold
2024-03-21 17:25 ` Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240319-topic-msm-polling-cleanup-v1-26-e0aee1dbcd78@linaro.org \
--to=konrad.dybcio@linaro.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=cros-qcom-dts-watchers@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®