From: Hugo Villeneuve <hugo@hugovil.com>
To: gregkh@linuxfoundation.org, jirislaby@kernel.org
Cc: linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org,
hugo@hugovil.com, andy.shevchenko@gmail.com,
Hugo Villeneuve <hvilleneuve@dimonoff.com>
Subject: [PATCH v3 0/5] serial: sc16is7xx: split into core and I2C/SPI parts
Date: Tue, 2 Apr 2024 13:43:48 -0400 [thread overview]
Message-ID: <20240402174353.256627-1-hugo@hugovil.com> (raw)
From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Hello,
this patch series splits the SPI/I2C parts for the sc16is7xx driver into
separate source files (and separate I2C/SPI drivers).
These changes are based on suggestions made by Andy Shevchenko
following this discussion:
Link: https://lore.kernel.org/all/CAHp75VebCZckUrNraYQj9k=Mrn2kbYs1Lx26f5-8rKJ3RXeh-w@mail.gmail.com/
The changes are split into multiple patches to facilitate the review process.
In the end, some of them could be merged into a single patch.
I have tested the changes on a custom board with two SC16IS752 DUART over
a SPI interface using a Variscite IMX8MN NANO SOM. The four UARTs are
configured in RS-485 mode.
I did not test the changes on a real SC16is7xx using the I2C interface. But
I slighly modified the driver to be able to simulate an I2C device using
i2c-stub. I was then able to instantiate a virtual I2C device without
disturbing existing connection/communication between real SPI devices on
/dev/ttySC0 and /dev/ttySC2 (using a loopback cable).
Thank you.
Link: [v1] https://lore.kernel.org/lkml/20240206214208.2141067-1-hugo@hugovil.com
[v2] https://lore.kernel.org/lkml/20240307161828.118495-1-hugo@hugovil.com
Changes for V2:
- Move port_registered[] init before the for loop to prevent bug if
aborting probe when i = 0
- Since patch f7b487648986 ("lib/find: add atomic find_bit() primitives") has
been dropped from linux-next/master, rework patch 2 (sc16is7xx_lines)
without find_and_set_bit.
Changes for V3:
- Simplify sc16is7xx_lines allocation by using the IDA framework
Hugo Villeneuve (5):
serial: sc16is7xx: unconditionally clear line bit in
sc16is7xx_remove()
serial: sc16is7xx: simplify and improve Kconfig help text
serial: sc16is7xx: split into core and I2C/SPI parts (core)
serial: sc16is7xx: split into core and I2C/SPI parts (sc16is7xx_lines)
serial: sc16is7xx: split into core and I2C/SPI parts
(sc16is7xx_regcfg)
drivers/tty/serial/Kconfig | 41 +++--
drivers/tty/serial/Makefile | 4 +-
drivers/tty/serial/sc16is7xx.c | 255 ++++++-----------------------
drivers/tty/serial/sc16is7xx.h | 41 +++++
drivers/tty/serial/sc16is7xx_i2c.c | 74 +++++++++
drivers/tty/serial/sc16is7xx_spi.c | 97 +++++++++++
6 files changed, 288 insertions(+), 224 deletions(-)
create mode 100644 drivers/tty/serial/sc16is7xx.h
create mode 100644 drivers/tty/serial/sc16is7xx_i2c.c
create mode 100644 drivers/tty/serial/sc16is7xx_spi.c
base-commit: 39cd87c4eb2b893354f3b850f916353f2658ae6f
--
2.39.2
next reply other threads:[~2024-04-02 17:45 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-02 17:43 Hugo Villeneuve [this message]
2024-04-02 17:43 ` [PATCH v3 1/5] serial: sc16is7xx: unconditionally clear line bit in sc16is7xx_remove() Hugo Villeneuve
2024-04-02 17:43 ` [PATCH v3 2/5] serial: sc16is7xx: simplify and improve Kconfig help text Hugo Villeneuve
2024-04-02 17:43 ` [PATCH v3 3/5] serial: sc16is7xx: split into core and I2C/SPI parts (core) Hugo Villeneuve
2024-04-02 19:40 ` Andy Shevchenko
2024-04-03 16:35 ` Hugo Villeneuve
2024-04-03 17:44 ` Andy Shevchenko
2024-04-03 17:59 ` Hugo Villeneuve
2024-04-03 18:04 ` Andy Shevchenko
2024-04-03 18:43 ` Hugo Villeneuve
2024-04-02 17:43 ` [PATCH v3 4/5] serial: sc16is7xx: split into core and I2C/SPI parts (sc16is7xx_lines) Hugo Villeneuve
2024-04-02 19:28 ` Andy Shevchenko
2024-04-02 19:51 ` Hugo Villeneuve
2024-04-02 19:55 ` Andy Shevchenko
2024-04-02 17:43 ` [PATCH v3 5/5] serial: sc16is7xx: split into core and I2C/SPI parts (sc16is7xx_regcfg) Hugo Villeneuve
2024-04-02 19:41 ` [PATCH v3 0/5] serial: sc16is7xx: split into core and I2C/SPI parts Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240402174353.256627-1-hugo@hugovil.com \
--to=hugo@hugovil.com \
--cc=andy.shevchenko@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=hvilleneuve@dimonoff.com \
--cc=jirislaby@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®