[PATCH v2] drm/ast: Fix soft lockup

[Jammy Huang <jammy_huang@aspeedtech.com>]

There is a while-loop in ast_dp_set_on_off() that could lead to
infinite-loop. This is because the register, VGACRI-Dx, checked in
this API is a scratch register actually controlled by a MCU, named
DPMCU, in BMC.

These scratch registers are protected by scu-lock. If suc-lock is not
off, DPMCU can not update these registers and then host will have soft
lockup due to never updated status.

DPMCU is used to control DP and relative registers to handshake with
host's VGA driver. Even the most time-consuming task, DP's link
training, is less than 100ms. 200ms should be enough.

Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
---
 drivers/gpu/drm/ast/ast_dp.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/ast/ast_dp.c b/drivers/gpu/drm/ast/ast_dp.c
index ebb6d8ebd44e..1e9259416980 100644
--- a/drivers/gpu/drm/ast/ast_dp.c
+++ b/drivers/gpu/drm/ast/ast_dp.c
@@ -180,6 +180,7 @@ void ast_dp_set_on_off(struct drm_device *dev, bool on)
 {
 	struct ast_device *ast = to_ast_device(dev);
 	u8 video_on_off = on;
+	u32 i = 0;
 
 	// Video On/Off
 	ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0xE3, (u8) ~AST_DP_VIDEO_ENABLE, on);
@@ -192,6 +193,8 @@ void ast_dp_set_on_off(struct drm_device *dev, bool on)
 						ASTDP_MIRROR_VIDEO_ENABLE) != video_on_off) {
 			// wait 1 ms
 			mdelay(1);
+			if (++i > 200)
+				break;
 		}
 	}
 }

base-commit: b0546776ad3f332e215cebc0b063ba4351971cca
-- 
2.25.1