mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Conor Dooley <conor@kernel.org>
To: linux-riscv@lists.infradead.org
Cc: conor@kernel.org, Conor Dooley <conor.dooley@microchip.com>,
	Daire McNamara <daire.mcnamara@microchip.com>,
	Cyril Jean <cyril.jean@microchip.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH v1 4/5] firmware: microchip: move buffer allocation into mpfs_auto_update_set_image_address()
Date: Wed, 10 Apr 2024 12:58:07 +0100	[thread overview]
Message-ID: <20240410-manhood-gathering-41ccbfdad649@spud> (raw)
In-Reply-To: <20240410-opulently-epic-8654bdac3422@spud>

From: Conor Dooley <conor.dooley@microchip.com>

This buffer is used exclusively by mpfs_auto_update_set_image_address(),
so move the management of it there, employing the recently added cleanup
infrastructure to avoid littering the function with gotos.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
 drivers/firmware/microchip/mpfs-auto-update.c | 32 ++++++++-----------
 1 file changed, 13 insertions(+), 19 deletions(-)

diff --git a/drivers/firmware/microchip/mpfs-auto-update.c b/drivers/firmware/microchip/mpfs-auto-update.c
index 078ff328f261..d7ce27f4ba1b 100644
--- a/drivers/firmware/microchip/mpfs-auto-update.c
+++ b/drivers/firmware/microchip/mpfs-auto-update.c
@@ -9,6 +9,7 @@
  *
  * Author: Conor Dooley <conor.dooley@microchip.com>
  */
+#include <linux/cleanup.h>
 #include <linux/debugfs.h>
 #include <linux/firmware.h>
 #include <linux/math.h>
@@ -233,15 +234,17 @@ static int mpfs_auto_update_verify_image(struct fw_upload *fw_uploader)
 	return ret;
 }
 
-static int mpfs_auto_update_set_image_address(struct mpfs_auto_update_priv *priv, char *buffer,
+static int mpfs_auto_update_set_image_address(struct mpfs_auto_update_priv *priv,
 					      u32 image_address, loff_t directory_address)
 {
 	struct erase_info erase;
-	size_t erase_size = AUTO_UPDATE_DIRECTORY_SIZE;
+	size_t erase_size = round_up(AUTO_UPDATE_DIRECTORY_SIZE, (u64)priv->flash->erasesize);
 	size_t bytes_written = 0, bytes_read = 0;
+	char *buffer __free(kfree) = kzalloc(erase_size, GFP_KERNEL);
 	int ret;
 
-	erase_size = round_up(erase_size, (u64)priv->flash->erasesize);
+	if (!buffer)
+		return -ENOMEM;
 
 	erase.addr = AUTO_UPDATE_DIRECTORY_BASE;
 	erase.len = erase_size;
@@ -287,7 +290,7 @@ static int mpfs_auto_update_set_image_address(struct mpfs_auto_update_priv *priv
 		return ret;
 
 	if (bytes_written != erase_size)
-		return ret;
+		return -EIO;
 
 	return 0;
 }
@@ -297,7 +300,6 @@ static int mpfs_auto_update_write_bitstream(struct fw_upload *fw_uploader, const
 {
 	struct mpfs_auto_update_priv *priv = fw_uploader->dd_handle;
 	struct erase_info erase;
-	char *buffer;
 	loff_t directory_address = AUTO_UPDATE_UPGRADE_DIRECTORY;
 	size_t erase_size = AUTO_UPDATE_DIRECTORY_SIZE;
 	size_t bytes_written = 0;
@@ -313,16 +315,12 @@ static int mpfs_auto_update_write_bitstream(struct fw_upload *fw_uploader, const
 		image_address = AUTO_UPDATE_BITSTREAM_BASE +
 				AUTO_UPDATE_UPGRADE_INDEX * priv->size_per_bitstream;
 
-	buffer = devm_kzalloc(priv->dev, erase_size, GFP_KERNEL);
-	if (!buffer)
-		return -ENOMEM;
-
 	/*
 	 * For bitstream info, the descriptor is written to a fixed offset,
 	 * so there is no need to set the image address.
 	 */
 	if (!is_info) {
-		ret = mpfs_auto_update_set_image_address(priv, buffer, image_address, directory_address);
+		ret = mpfs_auto_update_set_image_address(priv, image_address, directory_address);
 		if (ret) {
 			dev_err(priv->dev, "failed to set image address in the SPI directory: %d\n", ret);
 			return ret;
@@ -345,7 +343,7 @@ static int mpfs_auto_update_write_bitstream(struct fw_upload *fw_uploader, const
 	dev_info(priv->dev, "Erasing the flash at address (0x%x)\n", image_address);
 	ret = mtd_erase(priv->flash, &erase);
 	if (ret)
-		goto out;
+		return ret;
 
 	/*
 	 * No parsing etc of the bitstream is required. The system controller
@@ -355,19 +353,15 @@ static int mpfs_auto_update_write_bitstream(struct fw_upload *fw_uploader, const
 	dev_info(priv->dev, "Writing the image to the flash at address (0x%x)\n", image_address);
 	ret = mtd_write(priv->flash, (loff_t)image_address, size, &bytes_written, data);
 	if (ret)
-		goto out;
+		return ret;
 
-	if (bytes_written != size) {
-		ret = -EIO;
-		goto out;
-	}
+	if (bytes_written != size)
+		return -EIO;
 
 	*written = bytes_written;
 	dev_info(priv->dev, "Wrote 0x%zx bytes to the flash\n", bytes_written);
 
-out:
-	devm_kfree(priv->dev, buffer);
-	return ret;
+	return 0;
 }
 
 static enum fw_upload_err mpfs_auto_update_write(struct fw_upload *fw_uploader, const u8 *data,
-- 
2.43.0


  parent reply	other threads:[~2024-04-10 11:58 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-10 11:58 [PATCH v1 0/5] PolarFire SoC Auto Update design info support Conor Dooley
2024-04-10 11:58 ` [PATCH v1 1/5] firmware: microchip: support writing bitstream info to flash Conor Dooley
2024-04-10 11:58 ` [PATCH v1 2/5] firmware: microchip: don't unconditionally print validation success Conor Dooley
2024-04-24 20:26   ` Alexandre Ghiti
2024-04-24 20:59     ` Conor Dooley
2024-04-24 21:04       ` Conor Dooley
2024-04-10 11:58 ` [PATCH v1 3/5] firmware: microchip: clarify that sizes and addresses are in hex Conor Dooley
2024-04-10 11:58 ` Conor Dooley [this message]
2024-04-10 11:58 ` [PATCH v1 5/5] firmware: microchip: use scope-based cleanup where possible Conor Dooley
2024-06-05 18:42 ` (subset) [PATCH v1 0/5] PolarFire SoC Auto Update design info support Conor Dooley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240410-manhood-gathering-41ccbfdad649@spud \
    --to=conor@kernel.org \
    --cc=conor.dooley@microchip.com \
    --cc=cyril.jean@microchip.com \
    --cc=daire.mcnamara@microchip.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®