From: Laura Nao <laura.nao@collabora.com>
To: tglx@linutronix.de
Cc: kernel@collabora.com, laura.nao@collabora.com,
linux-kernel@vger.kernel.org, regressions@leemhuis.info,
regressions@lists.linux.dev, x86@kernel.org
Subject: Re: [REGRESSION] mainline boot regression on AMD Stoney Ridge Chromebooks
Date: Wed, 10 Apr 2024 10:15:28 +0200 [thread overview]
Message-ID: <20240410081529.126363-1-laura.nao@collabora.com> (raw)
In-Reply-To: <874jca7mf5.ffs@tglx>
Hi Thomas,
On 4/9/24 14:25, Thomas Gleixner wrote:
> Laura!
>
> On Tue, Apr 09 2024 at 12:07, Laura Nao wrote:
>> On 4/8/24 16:19, Thomas Gleixner wrote:
>>> That's the commit right before switching over and according to your
>>> bisect it works. Now apply the patch below, which just runs the new
>>> topology scan function but discards the result.
>>
>> The ace278e7eca6 revision with the patch you provided boots correctly.
>
> Progress :)
>
Indeed :)
> Can you please replace that patch with the one below?
So, with this patch applied on top of ace278e7eca6 the kernel doesn't
boot anymore - reference test job:
https://lava.collabora.dev/scheduler/job/13324010
I see the only change between the second and third patch you provided,
besides the debug prints, is:
- if (!topo_is_converted(c))
- return;
-
Printing the debug information without this probably doesn't really help,
but just in case it's useful: I tried excluding the change above from the
patch while leaving everything else unchanged - reference test job:
https://lava.collabora.dev/scheduler/job/13324298 (also pasted the
kernel log here for easier consultation: https://pastebin.com/raw/TQBDvCah)
Hope this helps,
Laura
>
> Thanks,
>
> tglx
> ---
> --- a/arch/x86/kernel/cpu/common.c
> +++ b/arch/x86/kernel/cpu/common.c
> @@ -1616,6 +1616,13 @@ void __init early_cpu_init(void)
> #endif
> }
> early_identify_cpu(&boot_cpu_data);
> +
> + pr_info("Max cores: %u\n", boot_cpu_data.x86_max_cores);
> + pr_info("pkg %u die %u core %u nid %u\n", boot_cpu_data.topo.pkg_id,
> + boot_cpu_data.topo.die_id, boot_cpu_data.topo.core_id,
> + boot_cpu_data.topo.amd_node_id);
> + pr_info("SNS %u\n", smp_num_siblings);
> + pr_info("NPP %u MDPP %u\n", __amd_nodes_per_pkg, __max_die_per_package);
> }
>
> static bool detect_null_seg_behavior(void)
> --- a/arch/x86/kernel/cpu/topology_amd.c
> +++ b/arch/x86/kernel/cpu/topology_amd.c
> @@ -29,7 +29,17 @@ static bool parse_8000_0008(struct topo_
> if (!sft)
> sft = get_count_order(ecx.cpu_nthreads + 1);
>
> - topology_set_dom(tscan, TOPO_SMT_DOMAIN, sft, ecx.cpu_nthreads + 1);
> + /*
> + * cpu_nthreads describes the number of threads in the package
> + * sft is the number of APIC ID bits per package
> + *
> + * As the number of actual threads per core is not described in
> + * this leaf, just set the CORE domain shift and let the later
> + * parsers set SMT shift. Assume one thread per core by default
> + * which is correct if there are no other CPUID leafs to parse.
> + */
> + topology_update_dom(tscan, TOPO_SMT_DOMAIN, 0, 1);
> + topology_set_dom(tscan, TOPO_CORE_DOMAIN, sft, ecx.cpu_nthreads + 1);
> return true;
> }
>
> @@ -73,12 +83,14 @@ static bool parse_8000_001e(struct topo_
> tscan->c->topo.initial_apicid = leaf.ext_apic_id;
>
> /*
> - * If leaf 0xb is available, then SMT shift is set already. If not
> - * take it from ecx.threads_per_core and use topo_update_dom() -
> - * topology_set_dom() would propagate and overwrite the already
> - * propagated CORE level.
> + * If leaf 0xb is available, then the domain shifts are set
> + * already and nothing to do here.
> */
> if (!has_0xb) {
> + /*
> + * Leaf 0x80000008 set the CORE domain shift already.
> + * Update the SMT domain, but do not propagate it.
> + */
> unsigned int nthreads = leaf.core_nthreads + 1;
>
> topology_update_dom(tscan, TOPO_SMT_DOMAIN, get_count_order(nthreads), nthreads);
> --- a/arch/x86/kernel/cpu/topology_common.c
> +++ b/arch/x86/kernel/cpu/topology_common.c
> @@ -133,6 +133,10 @@ static void parse_topology(struct topo_s
> tscan->ebx1_nproc_shift = get_count_order(ebx.nproc);
>
> switch (c->x86_vendor) {
> + case X86_VENDOR_AMD:
> + if (IS_ENABLED(CONFIG_CPU_SUP_AMD))
> + cpu_parse_topology_amd(tscan);
> + break;
> case X86_VENDOR_CENTAUR:
> case X86_VENDOR_ZHAOXIN:
> parse_legacy(tscan);
> @@ -162,6 +166,9 @@ static void topo_set_ids(struct topo_sca
>
> if (c->x86_vendor == X86_VENDOR_AMD)
> cpu_topology_fixup_amd(tscan);
> +
> + pr_info("pkg %u die %u core %u nid %u\n", c->topo.pkg_id, c->topo.die_id,
> + c->topo.core_id, c->topo.amd_node_id);
> }
>
> static void topo_set_max_cores(struct topo_scan *tscan)
> @@ -175,6 +182,7 @@ static void topo_set_max_cores(struct to
> */
> tscan->c->x86_max_cores = tscan->dom_ncpus[TOPO_DIEGRP_DOMAIN] >>
> x86_topo_system.dom_shifts[TOPO_SMT_DOMAIN];
> + pr_info("Max cores: %u\n", tscan->c->x86_max_cores);
> }
>
> void cpu_parse_topology(struct cpuinfo_x86 *c)
> @@ -215,18 +223,19 @@ void __init cpu_init_topology(struct cpu
>
> parse_topology(&tscan, true);
>
> - if (!topo_is_converted(c))
> - return;
> -
> /* Copy the shift values and calculate the unit sizes. */
> memcpy(x86_topo_system.dom_shifts, tscan.dom_shifts, sizeof(x86_topo_system.dom_shifts));
>
> dom = TOPO_SMT_DOMAIN;
> x86_topo_system.dom_size[dom] = 1U << x86_topo_system.dom_shifts[dom];
> + pr_info("Dom %u Sft: %u Sz: %u\n", dom, x86_topo_system.dom_size[dom],
> + x86_topo_system.dom_shifts[dom]);
>
> for (dom++; dom < TOPO_MAX_DOMAIN; dom++) {
> sft = x86_topo_system.dom_shifts[dom] - x86_topo_system.dom_shifts[dom - 1];
> x86_topo_system.dom_size[dom] = 1U << sft;
> + pr_info("Dom %u Sft: %u Sz: %u\n", dom, x86_topo_system.dom_size[dom],
> + x86_topo_system.dom_shifts[dom]);
> }
>
> topo_set_ids(&tscan);
> @@ -238,6 +247,7 @@ void __init cpu_init_topology(struct cpu
> * changes further down the road to get it right during early boot.
> */
> smp_num_siblings = tscan.dom_ncpus[TOPO_SMT_DOMAIN];
> + pr_info("SNS %u\n", smp_num_siblings);
>
> /*
> * Neither it's clear whether there are as many dies as the APIC
> @@ -252,4 +262,6 @@ void __init cpu_init_topology(struct cpu
> */
> if (c->x86_vendor == X86_VENDOR_AMD || c->x86_vendor == X86_VENDOR_HYGON)
> __amd_nodes_per_pkg = __max_die_per_package = tscan.amd_nodes_per_pkg;
> +
> + pr_info("NPP %u MDPP %u\n", __amd_nodes_per_pkg, __max_die_per_package);
> }
next prev parent reply other threads:[~2024-04-10 8:15 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-22 17:52 Laura Nao
2024-03-28 9:44 ` Laura Nao
2024-03-28 11:50 ` Laura Nao
2024-04-04 8:24 ` Linux regression tracking (Thorsten Leemhuis)
2024-04-04 9:26 ` Laura Nao
2024-04-04 13:01 ` Thomas Gleixner
2024-04-04 13:05 ` Thomas Gleixner
2024-04-04 15:23 ` Laura Nao
2024-04-04 16:14 ` Thomas Gleixner
2024-04-04 18:06 ` Thomas Gleixner
2024-04-04 19:14 ` Thomas Gleixner
2024-04-04 20:05 ` Thomas Gleixner
2024-04-05 8:14 ` Laura Nao
2024-04-05 8:42 ` Thomas Gleixner
2024-04-05 10:32 ` Laura Nao
2024-04-05 13:38 ` Thomas Gleixner
2024-04-05 13:58 ` Laura Nao
2024-04-05 14:59 ` Thomas Gleixner
2024-04-08 8:20 ` Thomas Gleixner
2024-04-08 11:06 ` Laura Nao
2024-04-08 14:19 ` Thomas Gleixner
2024-04-09 10:07 ` Laura Nao
2024-04-09 12:25 ` Thomas Gleixner
2024-04-10 8:15 ` Laura Nao [this message]
2024-04-10 13:57 ` Thomas Gleixner
2024-04-10 16:11 ` Laura Nao
2024-04-10 19:34 ` Thomas Gleixner
2024-04-10 19:45 ` [patch 0/2] x86/cpu/amd: Fixup the topology rework fallout Thomas Gleixner
2024-04-10 19:45 ` [patch 1/2] x86/cpu/amd: Make the CPUID 0x80000008 parser correct Thomas Gleixner
2024-04-11 12:45 ` [tip: x86/urgent] " tip-bot2 for Thomas Gleixner
2024-04-12 10:12 ` tip-bot2 for Thomas Gleixner
2024-04-10 19:45 ` [patch 2/2] x86/cpu/amd: Make the NODEID_MSR union actually work Thomas Gleixner
2024-04-11 12:45 ` [tip: x86/urgent] " tip-bot2 for Thomas Gleixner
2024-04-12 10:12 ` tip-bot2 for Thomas Gleixner
2024-04-11 11:27 ` [patch 0/2] x86/cpu/amd: Fixup the topology rework fallout Laura Nao
2024-04-11 11:37 ` Linux regression tracking (Thorsten Leemhuis)
2024-04-11 12:14 ` Thomas Gleixner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240410081529.126363-1-laura.nao@collabora.com \
--to=laura.nao@collabora.com \
--cc=kernel@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=regressions@leemhuis.info \
--cc=regressions@lists.linux.dev \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®