From: Justin Chen <justin.chen@broadcom.com>
To: netdev@vger.kernel.org
Cc: Justin Chen <justin.chen@broadcom.com>,
Florian Fainelli <florian.fainelli@broadcom.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Simon Horman <horms@kernel.org>,
bcm-kernel-feedback-list@broadcom.com (open list:BROADCOM ASP
2.0 ETHERNET DRIVER), linux-kernel@vger.kernel.org (open list)
Subject: [PATCH net v2] net: bcmasp: fix memory leak when bringing down interface
Date: Thu, 18 Apr 2024 11:05:41 -0700 [thread overview]
Message-ID: <20240418180541.2271719-1-justin.chen@broadcom.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 2478 bytes --]
When bringing down the TX rings we flush the rings but forget to
reclaimed the flushed packets. This leads to a memory leak since we
do not free the dma mapped buffers. This also leads to tx control
block corruption when bringing down the interface for power
management.
Fixes: 490cb412007d ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
v2
- Fix typo and changed "if" -> interface
.../net/ethernet/broadcom/asp2/bcmasp_intf.c | 21 ++++++++++++-------
1 file changed, 14 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c b/drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c
index 72ea97c5d5d4..82768b0e9026 100644
--- a/drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c
+++ b/drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c
@@ -436,10 +436,8 @@ static void umac_init(struct bcmasp_intf *intf)
umac_wl(intf, 0x800, UMC_RX_MAX_PKT_SZ);
}
-static int bcmasp_tx_poll(struct napi_struct *napi, int budget)
+static int bcmasp_tx_reclaim(struct bcmasp_intf *intf)
{
- struct bcmasp_intf *intf =
- container_of(napi, struct bcmasp_intf, tx_napi);
struct bcmasp_intf_stats64 *stats = &intf->stats64;
struct device *kdev = &intf->parent->pdev->dev;
unsigned long read, released = 0;
@@ -482,10 +480,16 @@ static int bcmasp_tx_poll(struct napi_struct *napi, int budget)
DESC_RING_COUNT);
}
- /* Ensure all descriptors have been written to DRAM for the hardware
- * to see updated contents.
- */
- wmb();
+ return released;
+}
+
+static int bcmasp_tx_poll(struct napi_struct *napi, int budget)
+{
+ struct bcmasp_intf *intf =
+ container_of(napi, struct bcmasp_intf, tx_napi);
+ int released = 0;
+
+ released = bcmasp_tx_reclaim(intf);
napi_complete(&intf->tx_napi);
@@ -797,6 +801,7 @@ static void bcmasp_init_tx(struct bcmasp_intf *intf)
intf->tx_spb_dma_read = intf->tx_spb_dma_addr;
intf->tx_spb_index = 0;
intf->tx_spb_clean_index = 0;
+ memset(intf->tx_cbs, 0, sizeof(struct bcmasp_tx_cb) * DESC_RING_COUNT);
/* Make sure channels are disabled */
tx_spb_ctrl_wl(intf, 0x0, TX_SPB_CTRL_ENABLE);
@@ -885,6 +890,8 @@ static void bcmasp_netif_deinit(struct net_device *dev)
} while (timeout-- > 0);
tx_spb_dma_wl(intf, 0x0, TX_SPB_DMA_FIFO_CTRL);
+ bcmasp_tx_reclaim(intf);
+
umac_enable_set(intf, UMC_CMD_TX_EN, 0);
phy_stop(dev->phydev);
--
2.34.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4206 bytes --]
next reply other threads:[~2024-04-18 18:05 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-18 18:05 Justin Chen [this message]
2024-04-18 18:33 ` Simon Horman
2024-04-20 3:40 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240418180541.2271719-1-justin.chen@broadcom.com \
--to=justin.chen@broadcom.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=florian.fainelli@broadcom.com \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®