From: Michael Walle <mwalle@kernel.org>
To: Tudor Ambarus <tudor.ambarus@linaro.org>,
Pratyush Yadav <pratyush@kernel.org>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>
Cc: Ricardo Ribalda <ribalda@kernel.org>,
linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org,
Michael Walle <mwalle@kernel.org>
Subject: [PATCH v2 2/6] mtd: spi-nor: get rid of non-power-of-2 page size handling
Date: Fri, 19 Apr 2024 16:12:45 +0200 [thread overview]
Message-ID: <20240419141249.609534-3-mwalle@kernel.org> (raw)
In-Reply-To: <20240419141249.609534-1-mwalle@kernel.org>
The Xilinx flashes were the only user of the page sized that were no
power of 2. Support for them were dropped, thus we can also get rid of
the special page size handling for it.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
---
drivers/mtd/spi-nor/core.c | 41 ++++++++++----------------------------
drivers/mtd/spi-nor/core.h | 4 ----
2 files changed, 11 insertions(+), 34 deletions(-)
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index cbe5f92eb0af..31dfdbf96765 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -1463,14 +1463,6 @@ static void spi_nor_unlock_and_unprep_rd(struct spi_nor *nor, loff_t start, size
spi_nor_unprep(nor);
}
-static u32 spi_nor_convert_addr(struct spi_nor *nor, loff_t addr)
-{
- if (!nor->params->convert_addr)
- return addr;
-
- return nor->params->convert_addr(nor, addr);
-}
-
/*
* Initiate the erasure of a single sector
*/
@@ -1478,8 +1470,6 @@ int spi_nor_erase_sector(struct spi_nor *nor, u32 addr)
{
int i;
- addr = spi_nor_convert_addr(nor, addr);
-
if (nor->spimem) {
struct spi_mem_op op =
SPI_NOR_SECTOR_ERASE_OP(nor->erase_opcode,
@@ -2064,8 +2054,6 @@ static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len,
while (len) {
loff_t addr = from;
- addr = spi_nor_convert_addr(nor, addr);
-
ret = spi_nor_read_data(nor, addr, len, buf);
if (ret == 0) {
/* We shouldn't see 0-length reads */
@@ -2098,7 +2086,7 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const u_char *buf)
{
struct spi_nor *nor = mtd_to_spi_nor(mtd);
- size_t page_offset, page_remain, i;
+ size_t i;
ssize_t ret;
u32 page_size = nor->params->page_size;
@@ -2111,23 +2099,9 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
for (i = 0; i < len; ) {
ssize_t written;
loff_t addr = to + i;
-
- /*
- * If page_size is a power of two, the offset can be quickly
- * calculated with an AND operation. On the other cases we
- * need to do a modulus operation (more expensive).
- */
- if (is_power_of_2(page_size)) {
- page_offset = addr & (page_size - 1);
- } else {
- u64 aux = addr;
-
- page_offset = do_div(aux, page_size);
- }
+ size_t page_offset = addr & (page_size - 1);
/* the size of data remaining on the first page */
- page_remain = min_t(size_t, page_size - page_offset, len - i);
-
- addr = spi_nor_convert_addr(nor, addr);
+ size_t page_remain = min_t(size_t, page_size - page_offset, len - i);
ret = spi_nor_lock_device(nor);
if (ret)
@@ -3054,7 +3028,14 @@ static int spi_nor_init_params(struct spi_nor *nor)
spi_nor_init_params_deprecated(nor);
}
- return spi_nor_late_init_params(nor);
+ ret = spi_nor_late_init_params(nor);
+ if (ret)
+ return ret;
+
+ if (WARN_ON(!is_power_of_2(nor->params->page_size)))
+ return -EINVAL;
+
+ return 0;
}
/** spi_nor_set_octal_dtr() - enable or disable Octal DTR I/O.
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 072c69b0d06c..3043d583eac2 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -366,9 +366,6 @@ struct spi_nor_otp {
* @set_octal_dtr: enables or disables SPI NOR octal DTR mode.
* @quad_enable: enables SPI NOR quad mode.
* @set_4byte_addr_mode: puts the SPI NOR in 4 byte addressing mode.
- * @convert_addr: converts an absolute address into something the flash
- * will understand. Particularly useful when pagesize is
- * not a power-of-2.
* @setup: (optional) configures the SPI NOR memory. Useful for
* SPI NOR flashes that have peculiarities to the SPI NOR
* standard e.g. different opcodes, specific address
@@ -403,7 +400,6 @@ struct spi_nor_flash_parameter {
int (*set_octal_dtr)(struct spi_nor *nor, bool enable);
int (*quad_enable)(struct spi_nor *nor);
int (*set_4byte_addr_mode)(struct spi_nor *nor, bool enable);
- u32 (*convert_addr)(struct spi_nor *nor, u32 addr);
int (*setup)(struct spi_nor *nor, const struct spi_nor_hwcaps *hwcaps);
int (*ready)(struct spi_nor *nor);
--
2.39.2
next prev parent reply other threads:[~2024-04-19 14:14 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-19 14:12 [PATCH v2 0/6] mtd: spi-nor: spring cleaning Michael Walle
2024-04-19 14:12 ` [PATCH v2 1/6] mtd: spi-nor: Remove support for Xilinx S3AN flashes Michael Walle
2024-04-19 15:16 ` Ricardo Ribalda Delgado
2024-04-19 14:12 ` Michael Walle [this message]
2024-04-19 18:15 ` [PATCH v2 2/6] mtd: spi-nor: get rid of non-power-of-2 page size handling Pratyush Yadav
2024-04-19 14:12 ` [PATCH v2 3/6] mtd: spi-nor: remove .setup() callback Michael Walle
2024-04-22 5:55 ` Tudor Ambarus
2024-05-27 13:27 ` Pratyush Yadav
2024-04-19 14:12 ` [PATCH v2 4/6] mtd: spi-nor: get rid of SPI_NOR_NO_FR Michael Walle
2024-04-19 18:29 ` Pratyush Yadav
2024-04-22 5:59 ` Tudor Ambarus
2024-05-27 14:33 ` Pratyush Yadav
2024-04-19 14:12 ` [PATCH v2 5/6] mtd: spi-nor: simplify spi_nor_get_flash_info() Michael Walle
2024-04-22 6:41 ` Tudor Ambarus
2024-04-22 9:53 ` Michael Walle
2024-04-22 10:12 ` Tudor Ambarus
2024-04-22 10:14 ` Tudor Ambarus
2024-04-19 14:12 ` [PATCH v2 6/6] mtd: spi-nor: introduce support for displaying deprecation message Michael Walle
2024-04-19 18:38 ` Pratyush Yadav
2024-04-22 6:06 ` Tudor Ambarus
2024-04-22 10:00 ` Michael Walle
2024-04-22 6:42 ` Tudor Ambarus
2024-05-27 15:10 ` [PATCH v2 0/6] mtd: spi-nor: spring cleaning Pratyush Yadav
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240419141249.609534-3-mwalle@kernel.org \
--to=mwalle@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=pratyush@kernel.org \
--cc=ribalda@kernel.org \
--cc=richard@nod.at \
--cc=tudor.ambarus@linaro.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®