From: Sean Christopherson <seanjc@google.com>
To: Sean Christopherson <seanjc@google.com>,
Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 3/4] KVM: Register cpuhp and syscore callbacks when enabling hardware
Date: Thu, 25 Apr 2024 16:39:50 -0700 [thread overview]
Message-ID: <20240425233951.3344485-4-seanjc@google.com> (raw)
In-Reply-To: <20240425233951.3344485-1-seanjc@google.com>
Register KVM's cpuhp and syscore callback when enabling virtualization
in hardware instead of registering the callbacks during initialization,
and let the CPU up/down framework invoke the inner enable/disable
functions. Registering the callbacks during initialization makes things
more complex than they need to be, as KVM needs to be very careful about
handling races between enabling CPUs being onlined/offlined and hardware
being enabled/disabled.
Intel TDX support will require KVM to enable virtualization during KVM
initialization, i.e. will add another wrinkle to things, at which point
sorting out the potential races with kvm_usage_count would become even
more complex.
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
virt/kvm/kvm_main.c | 170 +++++++++++++++-----------------------------
1 file changed, 56 insertions(+), 114 deletions(-)
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 10dad093b7fb..ad1b5a9e86d4 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -5490,7 +5490,7 @@ EXPORT_SYMBOL_GPL(kvm_rebooting);
static DEFINE_PER_CPU(bool, hardware_enabled);
static int kvm_usage_count;
-static int __hardware_enable_nolock(void)
+static int hardware_enable_nolock(void)
{
if (__this_cpu_read(hardware_enabled))
return 0;
@@ -5505,34 +5505,18 @@ static int __hardware_enable_nolock(void)
return 0;
}
-static void hardware_enable_nolock(void *failed)
-{
- if (__hardware_enable_nolock())
- atomic_inc(failed);
-}
-
static int kvm_online_cpu(unsigned int cpu)
{
- int ret = 0;
-
/*
* Abort the CPU online process if hardware virtualization cannot
* be enabled. Otherwise running VMs would encounter unrecoverable
* errors when scheduled to this CPU.
*/
- mutex_lock(&kvm_lock);
- if (kvm_usage_count)
- ret = __hardware_enable_nolock();
- mutex_unlock(&kvm_lock);
- return ret;
+ return hardware_enable_nolock();
}
-static void hardware_disable_nolock(void *junk)
+static void hardware_disable_nolock(void *ign)
{
- /*
- * Note, hardware_disable_all_nolock() tells all online CPUs to disable
- * hardware, not just CPUs that successfully enabled hardware!
- */
if (!__this_cpu_read(hardware_enabled))
return;
@@ -5543,78 +5527,10 @@ static void hardware_disable_nolock(void *junk)
static int kvm_offline_cpu(unsigned int cpu)
{
- mutex_lock(&kvm_lock);
- if (kvm_usage_count)
- hardware_disable_nolock(NULL);
- mutex_unlock(&kvm_lock);
+ hardware_disable_nolock(NULL);
return 0;
}
-static void hardware_disable_all_nolock(void)
-{
- BUG_ON(!kvm_usage_count);
-
- kvm_usage_count--;
- if (!kvm_usage_count)
- on_each_cpu(hardware_disable_nolock, NULL, 1);
-}
-
-static void hardware_disable_all(void)
-{
- cpus_read_lock();
- mutex_lock(&kvm_lock);
- hardware_disable_all_nolock();
- mutex_unlock(&kvm_lock);
- cpus_read_unlock();
-}
-
-static int hardware_enable_all(void)
-{
- atomic_t failed = ATOMIC_INIT(0);
- int r;
-
- /*
- * Do not enable hardware virtualization if the system is going down.
- * If userspace initiated a forced reboot, e.g. reboot -f, then it's
- * possible for an in-flight KVM_CREATE_VM to trigger hardware enabling
- * after kvm_reboot() is called. Note, this relies on system_state
- * being set _before_ kvm_reboot(), which is why KVM uses a syscore ops
- * hook instead of registering a dedicated reboot notifier (the latter
- * runs before system_state is updated).
- */
- if (system_state == SYSTEM_HALT || system_state == SYSTEM_POWER_OFF ||
- system_state == SYSTEM_RESTART)
- return -EBUSY;
-
- /*
- * When onlining a CPU, cpu_online_mask is set before kvm_online_cpu()
- * is called, and so on_each_cpu() between them includes the CPU that
- * is being onlined. As a result, hardware_enable_nolock() may get
- * invoked before kvm_online_cpu(), which also enables hardware if the
- * usage count is non-zero. Disable CPU hotplug to avoid attempting to
- * enable hardware multiple times.
- */
- cpus_read_lock();
- mutex_lock(&kvm_lock);
-
- r = 0;
-
- kvm_usage_count++;
- if (kvm_usage_count == 1) {
- on_each_cpu(hardware_enable_nolock, &failed, 1);
-
- if (atomic_read(&failed)) {
- hardware_disable_all_nolock();
- r = -EBUSY;
- }
- }
-
- mutex_unlock(&kvm_lock);
- cpus_read_unlock();
-
- return r;
-}
-
static void kvm_shutdown(void)
{
/*
@@ -5646,8 +5562,7 @@ static int kvm_suspend(void)
lockdep_assert_not_held(&kvm_lock);
lockdep_assert_irqs_disabled();
- if (kvm_usage_count)
- hardware_disable_nolock(NULL);
+ hardware_disable_nolock(NULL);
return 0;
}
@@ -5656,8 +5571,7 @@ static void kvm_resume(void)
lockdep_assert_not_held(&kvm_lock);
lockdep_assert_irqs_disabled();
- if (kvm_usage_count)
- WARN_ON_ONCE(__hardware_enable_nolock());
+ WARN_ON_ONCE(hardware_enable_nolock());
}
static struct syscore_ops kvm_syscore_ops = {
@@ -5665,6 +5579,54 @@ static struct syscore_ops kvm_syscore_ops = {
.resume = kvm_resume,
.shutdown = kvm_shutdown,
};
+
+static int hardware_enable_all(void)
+{
+ int r;
+
+ guard(mutex)(&kvm_lock);
+
+ if (kvm_usage_count++)
+ return 0;
+
+ r = cpuhp_setup_state(CPUHP_AP_KVM_ONLINE, "kvm/cpu:online",
+ kvm_online_cpu, kvm_offline_cpu);
+ if (r)
+ return r;
+
+ register_syscore_ops(&kvm_syscore_ops);
+
+ /*
+ * Undo virtualization enabling and bail if the system is going down.
+ * If userspace initiated a forced reboot, e.g. reboot -f, then it's
+ * possible for an in-flight operation to enable virtualization after
+ * syscore_shutdown() is called, i.e. without kvm_shutdown() being
+ * invoked. Note, this relies on system_state being set _before_
+ * kvm_shutdown(), e.g. to ensure either kvm_shutdown() is invoked
+ * or this CPU observes the impending shutdown. Which is why KVM uses
+ * a syscore ops hook instead of registering a dedicated reboot
+ * notifier (the latter runs before system_state is updated).
+ */
+ if (system_state == SYSTEM_HALT || system_state == SYSTEM_POWER_OFF ||
+ system_state == SYSTEM_RESTART) {
+ unregister_syscore_ops(&kvm_syscore_ops);
+ cpuhp_remove_state(CPUHP_AP_KVM_ONLINE);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static void hardware_disable_all(void)
+{
+ guard(mutex)(&kvm_lock);
+
+ if (--kvm_usage_count)
+ return;
+
+ unregister_syscore_ops(&kvm_syscore_ops);
+ cpuhp_remove_state(CPUHP_AP_KVM_ONLINE);
+}
#else /* CONFIG_KVM_GENERIC_HARDWARE_ENABLING */
static int hardware_enable_all(void)
{
@@ -6370,15 +6332,6 @@ int kvm_init(unsigned vcpu_size, unsigned vcpu_align, struct module *module)
int r;
int cpu;
-#ifdef CONFIG_KVM_GENERIC_HARDWARE_ENABLING
- r = cpuhp_setup_state_nocalls(CPUHP_AP_KVM_ONLINE, "kvm/cpu:online",
- kvm_online_cpu, kvm_offline_cpu);
- if (r)
- return r;
-
- register_syscore_ops(&kvm_syscore_ops);
-#endif
-
/* A kmem cache lets us meet the alignment requirements of fx_save. */
if (!vcpu_align)
vcpu_align = __alignof__(struct kvm_vcpu);
@@ -6389,10 +6342,8 @@ int kvm_init(unsigned vcpu_size, unsigned vcpu_align, struct module *module)
offsetofend(struct kvm_vcpu, stats_id)
- offsetof(struct kvm_vcpu, arch),
NULL);
- if (!kvm_vcpu_cache) {
- r = -ENOMEM;
- goto err_vcpu_cache;
- }
+ if (!kvm_vcpu_cache)
+ return -ENOMEM;
for_each_possible_cpu(cpu) {
if (!alloc_cpumask_var_node(&per_cpu(cpu_kick_mask, cpu),
@@ -6449,11 +6400,6 @@ int kvm_init(unsigned vcpu_size, unsigned vcpu_align, struct module *module)
for_each_possible_cpu(cpu)
free_cpumask_var(per_cpu(cpu_kick_mask, cpu));
kmem_cache_destroy(kvm_vcpu_cache);
-err_vcpu_cache:
-#ifdef CONFIG_KVM_GENERIC_HARDWARE_ENABLING
- unregister_syscore_ops(&kvm_syscore_ops);
- cpuhp_remove_state_nocalls(CPUHP_AP_KVM_ONLINE);
-#endif
return r;
}
EXPORT_SYMBOL_GPL(kvm_init);
@@ -6475,10 +6421,6 @@ void kvm_exit(void)
kmem_cache_destroy(kvm_vcpu_cache);
kvm_vfio_ops_exit();
kvm_async_pf_deinit();
-#ifdef CONFIG_KVM_GENERIC_HARDWARE_ENABLING
- unregister_syscore_ops(&kvm_syscore_ops);
- cpuhp_remove_state_nocalls(CPUHP_AP_KVM_ONLINE);
-#endif
kvm_irqfd_exit();
}
EXPORT_SYMBOL_GPL(kvm_exit);
--
2.44.0.769.g3c40516874-goog
next prev parent reply other threads:[~2024-04-25 23:40 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-25 23:39 [PATCH 0/4] KVM: Register cpuhp/syscore callbacks when enabling virt Sean Christopherson
2024-04-25 23:39 ` [PATCH 1/4] x86/reboot: Unconditionally define cpu_emergency_virt_cb typedef Sean Christopherson
2024-05-13 12:50 ` Huang, Kai
2024-05-13 16:01 ` Sean Christopherson
2024-05-13 22:44 ` Huang, Kai
2024-05-14 22:41 ` Huang, Kai
2024-05-21 20:02 ` Sean Christopherson
2024-05-21 21:43 ` Huang, Kai
2024-05-21 23:16 ` Sean Christopherson
2024-04-25 23:39 ` [PATCH 2/4] KVM: x86: Register emergency virt callback in common code, via kvm_x86_ops Sean Christopherson
2024-04-26 8:52 ` Chao Gao
2024-04-26 17:08 ` Sean Christopherson
2024-05-13 12:55 ` Huang, Kai
2024-05-13 16:17 ` Sean Christopherson
2024-04-25 23:39 ` Sean Christopherson [this message]
2024-04-26 8:32 ` [PATCH 3/4] KVM: Register cpuhp and syscore callbacks when enabling hardware Chao Gao
2024-04-26 17:07 ` Sean Christopherson
2024-05-07 16:31 ` Sean Christopherson
2024-05-09 12:10 ` Huang, Kai
2024-05-13 12:56 ` Huang, Kai
2024-04-25 23:39 ` [PATCH 4/4] KVM: Rename functions related to enabling virtualization hardware Sean Christopherson
2024-05-13 12:59 ` Huang, Kai
2024-05-13 16:20 ` Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240425233951.3344485-4-seanjc@google.com \
--to=seanjc@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®