From: Peter Griffin <peter.griffin@linaro.org>
To: alim.akhtar@samsung.com, avri.altman@wdc.com, bvanassche@acm.org,
robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
James.Bottomley@HansenPartnership.com,
martin.petersen@oracle.com
Cc: linux-scsi@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
tudor.ambarus@linaro.org, andre.draszik@linaro.org,
saravanak@google.com, willmcvicker@google.com,
kernel-team@android.com, Peter Griffin <peter.griffin@linaro.org>,
Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH v3 5/6] scsi: ufs: host: ufs-exynos: add some pa_dbg_ register offsets into drvdata
Date: Fri, 26 Apr 2024 13:20:03 +0100 [thread overview]
Message-ID: <20240426122004.2249178-6-peter.griffin@linaro.org> (raw)
In-Reply-To: <20240426122004.2249178-1-peter.griffin@linaro.org>
This allows these registers to be at different offsets or not
exist at all on some SoCs variants.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Will McVicker <willmcvicker@google.com>
---
drivers/ufs/host/ufs-exynos.c | 38 ++++++++++++++++++++++++-----------
drivers/ufs/host/ufs-exynos.h | 6 +++++-
2 files changed, 31 insertions(+), 13 deletions(-)
diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c
index 66093a905986..c086630a96e8 100644
--- a/drivers/ufs/host/ufs-exynos.c
+++ b/drivers/ufs/host/ufs-exynos.c
@@ -308,8 +308,9 @@ static int exynosauto_ufs_post_pwr_change(struct exynos_ufs *ufs,
static int exynos7_ufs_pre_link(struct exynos_ufs *ufs)
{
+ struct exynos_ufs_uic_attr *attr = ufs->drv_data->uic_attr;
+ u32 val = attr->pa_dbg_opt_suite1_val;
struct ufs_hba *hba = ufs->hba;
- u32 val = ufs->drv_data->uic_attr->pa_dbg_option_suite;
int i;
exynos_ufs_enable_ov_tm(hba);
@@ -326,12 +327,13 @@ static int exynos7_ufs_pre_link(struct exynos_ufs *ufs)
UIC_ARG_MIB_SEL(TX_HIBERN8_CONTROL, i), 0x0);
ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_TXPHY_CFGUPDT), 0x1);
udelay(1);
- ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_OPTION_SUITE), val | (1 << 12));
+ ufshcd_dme_set(hba, UIC_ARG_MIB(attr->pa_dbg_opt_suite1_off),
+ val | (1 << 12));
ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_SKIP_RESET_PHY), 0x1);
ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_SKIP_LINE_RESET), 0x1);
ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_LINE_RESET_REQ), 0x1);
udelay(1600);
- ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_OPTION_SUITE), val);
+ ufshcd_dme_set(hba, UIC_ARG_MIB(attr->pa_dbg_opt_suite1_off), val);
return 0;
}
@@ -923,14 +925,19 @@ static int exynos_ufs_phy_init(struct exynos_ufs *ufs)
static void exynos_ufs_config_unipro(struct exynos_ufs *ufs)
{
+ struct exynos_ufs_uic_attr *attr = ufs->drv_data->uic_attr;
struct ufs_hba *hba = ufs->hba;
- ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_CLK_PERIOD),
- DIV_ROUND_UP(NSEC_PER_SEC, ufs->mclk_rate));
+ if (attr->pa_dbg_clk_period_off)
+ ufshcd_dme_set(hba, UIC_ARG_MIB(attr->pa_dbg_clk_period_off),
+ DIV_ROUND_UP(NSEC_PER_SEC, ufs->mclk_rate));
+
ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTRAILINGCLOCKS),
ufs->drv_data->uic_attr->tx_trailingclks);
- ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_OPTION_SUITE),
- ufs->drv_data->uic_attr->pa_dbg_option_suite);
+
+ if (attr->pa_dbg_opt_suite1_off)
+ ufshcd_dme_set(hba, UIC_ARG_MIB(attr->pa_dbg_opt_suite1_off),
+ attr->pa_dbg_opt_suite1_val);
}
static void exynos_ufs_config_intr(struct exynos_ufs *ufs, u32 errs, u8 index)
@@ -1488,10 +1495,11 @@ static int exynosauto_ufs_vh_init(struct ufs_hba *hba)
static int fsd_ufs_pre_link(struct exynos_ufs *ufs)
{
- int i;
+ struct exynos_ufs_uic_attr *attr = ufs->drv_data->uic_attr;
struct ufs_hba *hba = ufs->hba;
+ int i;
- ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_CLK_PERIOD),
+ ufshcd_dme_set(hba, UIC_ARG_MIB(attr->pa_dbg_clk_period_off),
DIV_ROUND_UP(NSEC_PER_SEC, ufs->mclk_rate));
ufshcd_dme_set(hba, UIC_ARG_MIB(0x201), 0x12);
ufshcd_dme_set(hba, UIC_ARG_MIB(0x200), 0x40);
@@ -1515,7 +1523,9 @@ static int fsd_ufs_pre_link(struct exynos_ufs *ufs)
ufshcd_dme_set(hba, UIC_ARG_MIB(0x200), 0x0);
ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_AUTOMODE_THLD), 0x4E20);
- ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_OPTION_SUITE), 0x2e820183);
+
+ ufshcd_dme_set(hba, UIC_ARG_MIB(attr->pa_dbg_opt_suite1_off),
+ 0x2e820183);
ufshcd_dme_set(hba, UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), 0x0);
exynos_ufs_establish_connt(ufs);
@@ -1651,7 +1661,9 @@ static struct exynos_ufs_uic_attr exynos7_uic_attr = {
.rx_hs_g1_prep_sync_len_cap = PREP_LEN(0xf),
.rx_hs_g2_prep_sync_len_cap = PREP_LEN(0xf),
.rx_hs_g3_prep_sync_len_cap = PREP_LEN(0xf),
- .pa_dbg_option_suite = 0x30103,
+ .pa_dbg_clk_period_off = PA_DBG_CLK_PERIOD,
+ .pa_dbg_opt_suite1_val = 0x30103,
+ .pa_dbg_opt_suite1_off = PA_DBG_OPTION_SUITE,
};
static const struct exynos_ufs_drv_data exynosauto_ufs_drvs = {
@@ -1725,7 +1737,9 @@ static struct exynos_ufs_uic_attr fsd_uic_attr = {
.rx_hs_g1_prep_sync_len_cap = PREP_LEN(0xf),
.rx_hs_g2_prep_sync_len_cap = PREP_LEN(0xf),
.rx_hs_g3_prep_sync_len_cap = PREP_LEN(0xf),
- .pa_dbg_option_suite = 0x2E820183,
+ .pa_dbg_clk_period_off = PA_DBG_CLK_PERIOD,
+ .pa_dbg_opt_suite1_val = 0x2E820183,
+ .pa_dbg_opt_suite1_off = PA_DBG_OPTION_SUITE,
};
static const struct exynos_ufs_drv_data fsd_ufs_drvs = {
diff --git a/drivers/ufs/host/ufs-exynos.h b/drivers/ufs/host/ufs-exynos.h
index 7acc13914100..f30423223474 100644
--- a/drivers/ufs/host/ufs-exynos.h
+++ b/drivers/ufs/host/ufs-exynos.h
@@ -145,7 +145,11 @@ struct exynos_ufs_uic_attr {
/* Common Attributes */
unsigned int cmn_pwm_clk_ctrl;
/* Internal Attributes */
- unsigned int pa_dbg_option_suite;
+ unsigned int pa_dbg_clk_period_off;
+ unsigned int pa_dbg_opt_suite1_val;
+ unsigned int pa_dbg_opt_suite1_off;
+ unsigned int pa_dbg_opt_suite2_val;
+ unsigned int pa_dbg_opt_suite2_off;
/* Changeable Attributes */
unsigned int rx_adv_fine_gran_sup_en;
unsigned int rx_adv_fine_gran_step;
--
2.44.0.769.g3c40516874-goog
next prev parent reply other threads:[~2024-04-26 12:20 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-26 12:19 [PATCH v3 0/6] ufs-exynos support for Tensor GS101 Peter Griffin
2024-04-26 12:19 ` [PATCH v3 1/6] dt-bindings: ufs: exynos-ufs: Add gs101 compatible Peter Griffin
2024-04-26 19:11 ` Rob Herring
2024-04-26 12:20 ` [PATCH v3 2/6] scsi: ufs: host: ufs-exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option Peter Griffin
2024-04-26 12:20 ` [PATCH v3 3/6] scsi: ufs: host: ufs-exynos: add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option Peter Griffin
2024-04-26 12:20 ` [PATCH v3 4/6] scsi: ufs: host: ufs-exynos: allow max frequencies up to 267Mhz Peter Griffin
2024-04-26 12:20 ` Peter Griffin [this message]
2024-04-26 12:20 ` [PATCH v3 6/6] scsi: ufs: host: ufs-exynos: Add support for Tensor gs101 SoC Peter Griffin
2024-05-07 1:38 ` [PATCH v3 0/6] ufs-exynos support for Tensor GS101 Martin K. Petersen
2024-05-11 18:39 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240426122004.2249178-6-peter.griffin@linaro.org \
--to=peter.griffin@linaro.org \
--cc=James.Bottomley@HansenPartnership.com \
--cc=alim.akhtar@samsung.com \
--cc=andre.draszik@linaro.org \
--cc=avri.altman@wdc.com \
--cc=bvanassche@acm.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel-team@android.com \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=robh@kernel.org \
--cc=saravanak@google.com \
--cc=tudor.ambarus@linaro.org \
--cc=willmcvicker@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®