mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Paweł Anikiel" <panikiel@google.com>
To: airlied@gmail.com, akpm@linux-foundation.org,
	conor+dt@kernel.org,  daniel@ffwll.ch, dinguyen@kernel.org,
	hverkuil-cisco@xs4all.nl,  krzysztof.kozlowski+dt@linaro.org,
	maarten.lankhorst@linux.intel.com,  mchehab@kernel.org,
	mripard@kernel.org, robh+dt@kernel.org,  tzimmermann@suse.de
Cc: devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
	chromeos-krk-upstreaming@google.com,
	"Paweł Anikiel" <panikiel@google.com>
Subject: [PATCH v3 09/10] media: dt-bindings: Add Intel Displayport RX IP
Date: Tue,  7 May 2024 15:54:12 +0000	[thread overview]
Message-ID: <20240507155413.266057-10-panikiel@google.com> (raw)
In-Reply-To: <20240507155413.266057-1-panikiel@google.com>

Add dt binding for the Intel Displayport receiver FPGA IP.
It is a part of the DisplayPort Intel FPGA IP Core, and supports
DisplayPort 1.4, HBR3 video capture and Multi-Stream Transport.

The user guide can be found here:
https://www.intel.com/programmable/technical-pdfs/683273.pdf

Signed-off-by: Paweł Anikiel <panikiel@google.com>
---
 .../devicetree/bindings/media/intel,dprx.yaml | 172 ++++++++++++++++++
 1 file changed, 172 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/intel,dprx.yaml

diff --git a/Documentation/devicetree/bindings/media/intel,dprx.yaml b/Documentation/devicetree/bindings/media/intel,dprx.yaml
new file mode 100644
index 000000000000..01bed858f746
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/intel,dprx.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/intel,dprx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel DisplayPort RX IP
+
+maintainers:
+  - Paweł Anikiel <panikiel@google.com>
+
+description: |
+  The Intel Displayport RX IP is a part of the DisplayPort Intel FPGA IP
+  Core. It implements a DisplayPort 1.4 receiver capable of HBR3 video
+  capture and Multi-Stream Transport.
+
+  The IP features a large number of configuration parameters, found at:
+  https://www.intel.com/content/www/us/en/docs/programmable/683273/23-3-20-0-1/sink-parameters.html
+
+  The following parameters have to be enabled:
+    - Support DisplayPort sink
+    - Enable GPU control
+  The following parameters have to be set in the devicetree:
+    - RX maximum link rate (using link-frequencies)
+    - Maximum lane count (using data-lanes)
+    - Support MST (using multi-stream-support)
+    - Max stream count (inferred from the number of ports)
+
+properties:
+  compatible:
+    const: intel,dprx-20.0.1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: MST virtual channel 0 or SST main link
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+
+            properties:
+              link-frequencies: true
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              multi-stream-support: true
+
+            required:
+              - data-lanes
+              - link-frequencies
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: MST virtual channel 0 or SST main link
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: MST virtual channel 1
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: MST virtual channel 2
+
+      port@4:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: MST virtual channel 3
+
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dp-receiver@c0062000 {
+        compatible = "intel,dprx-20.0.1";
+        reg = <0xc0062000 0x800>;
+        interrupt-parent = <&dprx_mst_irq>;
+        interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dprx_mst_in: endpoint {
+                    remote-endpoint = <&dp_input_mst_0>;
+                    data-lanes = <0 1 2 3>;
+                    link-frequencies = /bits/ 64 <1620000000 2700000000
+                                                  5400000000 8100000000>;
+                    multi-stream-support;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dprx_mst_0: endpoint {
+                    remote-endpoint = <&video_mst0_0>;
+                };
+            };
+
+            port@2 {
+                reg = <2>;
+                dprx_mst_1: endpoint {
+                    remote-endpoint = <&video_mst1_0>;
+                };
+            };
+
+            port@3 {
+                reg = <3>;
+                dprx_mst_2: endpoint {
+                    remote-endpoint = <&video_mst2_0>;
+                };
+            };
+
+            port@4 {
+                reg = <4>;
+                dprx_mst_3: endpoint {
+                    remote-endpoint = <&video_mst3_0>;
+                };
+            };
+        };
+    };
+
+  - |
+    dp-receiver@c0064000 {
+        compatible = "intel,dprx-20.0.1";
+        reg = <0xc0064000 0x800>;
+        interrupt-parent = <&dprx_sst_irq>;
+        interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dprx_sst_in: endpoint {
+                    remote-endpoint = <&dp_input_sst_0>;
+                    data-lanes = <0 1 2 3>;
+                    link-frequencies = /bits/ 64 <1620000000 2700000000
+                                                  5400000000 8100000000>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dprx_sst_0: endpoint {
+                    remote-endpoint = <&video_sst_0>;
+                };
+            };
+        };
+    };
-- 
2.45.0.rc1.225.g2a3ae87e7f-goog


  parent reply	other threads:[~2024-05-07 15:55 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-07 15:54 [PATCH v3 00/10] Add Chameleon v3 video support Paweł Anikiel
2024-05-07 15:54 ` [PATCH v3 01/10] media: Add Chameleon v3 video interface driver Paweł Anikiel
2024-06-03  7:57   ` Hans Verkuil
2024-06-03 14:32     ` Paweł Anikiel
2024-06-03 14:56       ` Hans Verkuil
2024-06-04 12:03         ` Paweł Anikiel
2024-06-04 12:46           ` Hans Verkuil
2024-05-07 15:54 ` [PATCH v3 02/10] drm/dp_mst: Move DRM-independent structures to separate header Paweł Anikiel
2024-05-07 15:54 ` [PATCH v3 03/10] lib: Move DisplayPort CRC functions to common lib Paweł Anikiel
2024-05-07 15:54 ` [PATCH v3 04/10] drm/display: Add mask definitions for DP_PAYLOAD_ALLOCATE_* registers Paweł Anikiel
2024-05-07 15:54 ` [PATCH v3 05/10] media: dt-bindings: video-interfaces: Support DisplayPort MST Paweł Anikiel
2024-05-10 21:16   ` Rob Herring
2024-05-13 11:07     ` Paweł Anikiel
2024-05-13 14:56   ` Rob Herring (Arm)
2024-05-07 15:54 ` [PATCH v3 06/10] media: v4l2-mediabus: Add support for DisplayPort media bus Paweł Anikiel
2024-05-07 15:54 ` [PATCH v3 07/10] media: intel: Add Displayport RX IP driver Paweł Anikiel
2024-06-03  8:37   ` Hans Verkuil
2024-06-04 12:32     ` Paweł Anikiel
2024-06-07 12:04       ` Hans Verkuil
2024-05-07 15:54 ` [PATCH v3 08/10] media: dt-bindings: Add Chameleon v3 video interface Paweł Anikiel
2024-05-10 21:25   ` Rob Herring (Arm)
2024-05-07 15:54 ` Paweł Anikiel [this message]
2024-05-10 21:24   ` [PATCH v3 09/10] media: dt-bindings: Add Intel Displayport RX IP Rob Herring
2024-05-13 10:39     ` Paweł Anikiel
2024-05-07 15:54 ` [PATCH v3 10/10] ARM: dts: chameleonv3: Add video device nodes Paweł Anikiel
2024-06-03  8:44 ` [PATCH v3 00/10] Add Chameleon v3 video support Hans Verkuil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240507155413.266057-10-panikiel@google.com \
    --to=panikiel@google.com \
    --cc=airlied@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=chromeos-krk-upstreaming@google.com \
    --cc=conor+dt@kernel.org \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dinguyen@kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mchehab@kernel.org \
    --cc=mripard@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®