[PATCH v3 3/4] arm64: dts: k3-am62a-wakeup: Add R5F device node

[Hari Nagalla <hnagalla@ti.com>]

From: Devarsh Thakkar <devarsht@ti.com>

AM62A SoCs have a single R5F core in waekup domain. This core is also
used as a device manager for the SoC.

Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi | 23 +++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
index 98043e9aa316..70471d969aa6 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
@@ -73,6 +73,29 @@ wkup_rti0: watchdog@2b000000 {
 		status = "reserved";
 	};
 
+	wkup_r5fss0: r5fss@78000000 {
+		compatible = "ti,am62-r5fss";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x78000000 0x00 0x78000000 0x8000>,
+			 <0x78100000 0x00 0x78100000 0x8000>;
+		power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
+		wkup_r5fss0_core0: r5f@78000000 {
+			compatible = "ti,am62-r5f";
+			reg = <0x78000000 0x00008000>,
+				<0x78100000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <121>;
+			ti,sci-proc-ids = <0x01 0xff>;
+			resets = <&k3_reset 121 1>;
+			firmware-name = "am62-wkup-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
 	wkup_vtm0: temperature-sensor@b00000 {
 		compatible = "ti,j7200-vtm";
 		reg = <0x00 0xb00000 0x00 0x400>,
-- 
2.34.1