From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: davem@davemloft.net
Cc: "Maxime Chevallier" <maxime.chevallier@bootlin.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
thomas.petazzoni@bootlin.com, "Andrew Lunn" <andrew@lunn.ch>,
"Jakub Kicinski" <kuba@kernel.org>,
"Eric Dumazet" <edumazet@google.com>,
"Paolo Abeni" <pabeni@redhat.com>,
"Russell King" <linux@armlinux.org.uk>,
linux-arm-kernel@lists.infradead.org,
"Christophe Leroy" <christophe.leroy@csgroup.eu>,
"Herve Codina" <herve.codina@bootlin.com>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"Heiner Kallweit" <hkallweit1@gmail.com>,
"Vladimir Oltean" <vladimir.oltean@nxp.com>,
"Köry Maincent" <kory.maincent@bootlin.com>,
"Jesse Brandeburg" <jesse.brandeburg@intel.com>,
"Marek Behún" <kabel@kernel.org>,
"Piergiorgio Beruto" <piergiorgio.beruto@gmail.com>,
"Oleksij Rempel" <o.rempel@pengutronix.de>,
"Nicolò Veronese" <nicveronese@gmail.com>,
"Simon Horman" <horms@kernel.org>,
mwojtas@chromium.org, "Nathan Chancellor" <nathan@kernel.org>,
"Antoine Tenart" <atenart@kernel.org>
Subject: [PATCH net-next v12 05/13] net: ethtool: Allow passing a phy index for some commands
Date: Wed, 5 Jun 2024 14:49:10 +0200 [thread overview]
Message-ID: <20240605124920.720690-6-maxime.chevallier@bootlin.com> (raw)
In-Reply-To: <20240605124920.720690-1-maxime.chevallier@bootlin.com>
Some netlink commands are target towards ethernet PHYs, to control some
of their features. As there's several such commands, add the ability to
pass a PHY index in the ethnl request, which will populate the generic
ethnl_req_info with the relevant phydev when the command targets a PHY.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
Documentation/networking/ethtool-netlink.rst | 7 +++
include/uapi/linux/ethtool_netlink.h | 1 +
net/ethtool/netlink.c | 48 +++++++++++++++++++-
net/ethtool/netlink.h | 5 ++
4 files changed, 59 insertions(+), 2 deletions(-)
diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
index 160bfb0ae8ba..8bc71f249448 100644
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -57,6 +57,7 @@ Structure of this header is
``ETHTOOL_A_HEADER_DEV_INDEX`` u32 device ifindex
``ETHTOOL_A_HEADER_DEV_NAME`` string device name
``ETHTOOL_A_HEADER_FLAGS`` u32 flags common for all requests
+ ``ETHTOOL_A_HEADER_PHY_INDEX`` u32 phy device index
============================== ====== =============================
``ETHTOOL_A_HEADER_DEV_INDEX`` and ``ETHTOOL_A_HEADER_DEV_NAME`` identify the
@@ -81,6 +82,12 @@ the behaviour is backward compatible, i.e. requests from old clients not aware
of the flag should be interpreted the way the client expects. A client must
not set flags it does not understand.
+``ETHTOOL_A_HEADER_PHY_INDEX`` identifies the Ethernet PHY the message relates to.
+As there are numerous commands that are related to PHY configuration, and because
+there may be more than one PHY on the link, the PHY index can be passed in the
+request for the commands that needs it. It is, however, not mandatory, and if it
+is not passed for commands that target a PHY, the net_device.phydev pointer
+is used.
Bit sets
========
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index b49b804b9495..f17dbe54bf5e 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -132,6 +132,7 @@ enum {
ETHTOOL_A_HEADER_DEV_INDEX, /* u32 */
ETHTOOL_A_HEADER_DEV_NAME, /* string */
ETHTOOL_A_HEADER_FLAGS, /* u32 - ETHTOOL_FLAG_* */
+ ETHTOOL_A_HEADER_PHY_INDEX, /* u32 */
/* add new constants above here */
__ETHTOOL_A_HEADER_CNT,
diff --git a/net/ethtool/netlink.c b/net/ethtool/netlink.c
index bd04f28d5cf4..f5b4adf324bc 100644
--- a/net/ethtool/netlink.c
+++ b/net/ethtool/netlink.c
@@ -4,6 +4,7 @@
#include <linux/ethtool_netlink.h>
#include <linux/pm_runtime.h>
#include "netlink.h"
+#include <linux/phy_link_topology.h>
static struct genl_family ethtool_genl_family;
@@ -30,6 +31,24 @@ const struct nla_policy ethnl_header_policy_stats[] = {
ETHTOOL_FLAGS_STATS),
};
+const struct nla_policy ethnl_header_policy_phy[] = {
+ [ETHTOOL_A_HEADER_DEV_INDEX] = { .type = NLA_U32 },
+ [ETHTOOL_A_HEADER_DEV_NAME] = { .type = NLA_NUL_STRING,
+ .len = ALTIFNAMSIZ - 1 },
+ [ETHTOOL_A_HEADER_FLAGS] = NLA_POLICY_MASK(NLA_U32,
+ ETHTOOL_FLAGS_BASIC),
+ [ETHTOOL_A_HEADER_PHY_INDEX] = NLA_POLICY_MIN(NLA_U32, 1),
+};
+
+const struct nla_policy ethnl_header_policy_phy_stats[] = {
+ [ETHTOOL_A_HEADER_DEV_INDEX] = { .type = NLA_U32 },
+ [ETHTOOL_A_HEADER_DEV_NAME] = { .type = NLA_NUL_STRING,
+ .len = ALTIFNAMSIZ - 1 },
+ [ETHTOOL_A_HEADER_FLAGS] = NLA_POLICY_MASK(NLA_U32,
+ ETHTOOL_FLAGS_STATS),
+ [ETHTOOL_A_HEADER_PHY_INDEX] = NLA_POLICY_MIN(NLA_U32, 1),
+};
+
int ethnl_ops_begin(struct net_device *dev)
{
int ret;
@@ -89,8 +108,9 @@ int ethnl_parse_header_dev_get(struct ethnl_req_info *req_info,
const struct nlattr *header, struct net *net,
struct netlink_ext_ack *extack, bool require_dev)
{
- struct nlattr *tb[ARRAY_SIZE(ethnl_header_policy)];
+ struct nlattr *tb[ARRAY_SIZE(ethnl_header_policy_phy)];
const struct nlattr *devname_attr;
+ struct phy_device *phydev = NULL;
struct net_device *dev = NULL;
u32 flags = 0;
int ret;
@@ -104,7 +124,7 @@ int ethnl_parse_header_dev_get(struct ethnl_req_info *req_info,
/* No validation here, command policy should have a nested policy set
* for the header, therefore validation should have already been done.
*/
- ret = nla_parse_nested(tb, ARRAY_SIZE(ethnl_header_policy) - 1, header,
+ ret = nla_parse_nested(tb, ARRAY_SIZE(ethnl_header_policy_phy) - 1, header,
NULL, extack);
if (ret < 0)
return ret;
@@ -145,6 +165,30 @@ int ethnl_parse_header_dev_get(struct ethnl_req_info *req_info,
return -EINVAL;
}
+ if (dev) {
+ if (tb[ETHTOOL_A_HEADER_PHY_INDEX]) {
+ struct nlattr *phy_id;
+
+ phy_id = tb[ETHTOOL_A_HEADER_PHY_INDEX];
+ phydev = phy_link_topo_get_phy(dev,
+ nla_get_u32(phy_id));
+ if (!phydev) {
+ NL_SET_BAD_ATTR(extack, phy_id);
+ return -ENODEV;
+ }
+ } else {
+ /* If we need a PHY but no phy index is specified, fallback
+ * to dev->phydev
+ */
+ phydev = dev->phydev;
+ }
+ } else if (tb[ETHTOOL_A_HEADER_PHY_INDEX]) {
+ NL_SET_ERR_MSG_ATTR(extack, header,
+ "can't target a PHY without a netdev");
+ return -EINVAL;
+ }
+
+ req_info->phydev = phydev;
req_info->dev = dev;
req_info->flags = flags;
return 0;
diff --git a/net/ethtool/netlink.h b/net/ethtool/netlink.h
index 9a333a8d04c1..d57a890b5d9e 100644
--- a/net/ethtool/netlink.h
+++ b/net/ethtool/netlink.h
@@ -250,6 +250,7 @@ static inline unsigned int ethnl_reply_header_size(void)
* @dev: network device the request is for (may be null)
* @dev_tracker: refcount tracker for @dev reference
* @flags: request flags common for all request types
+ * @phydev: phy_device connected to @dev this request is for (may be null)
*
* This is a common base for request specific structures holding data from
* parsed userspace request. These always embed struct ethnl_req_info at
@@ -259,6 +260,7 @@ struct ethnl_req_info {
struct net_device *dev;
netdevice_tracker dev_tracker;
u32 flags;
+ struct phy_device *phydev;
};
static inline void ethnl_parse_header_dev_put(struct ethnl_req_info *req_info)
@@ -395,9 +397,12 @@ extern const struct ethnl_request_ops ethnl_rss_request_ops;
extern const struct ethnl_request_ops ethnl_plca_cfg_request_ops;
extern const struct ethnl_request_ops ethnl_plca_status_request_ops;
extern const struct ethnl_request_ops ethnl_mm_request_ops;
+extern const struct ethnl_request_ops ethnl_phy_request_ops;
extern const struct nla_policy ethnl_header_policy[ETHTOOL_A_HEADER_FLAGS + 1];
extern const struct nla_policy ethnl_header_policy_stats[ETHTOOL_A_HEADER_FLAGS + 1];
+extern const struct nla_policy ethnl_header_policy_phy[ETHTOOL_A_HEADER_PHY_INDEX + 1];
+extern const struct nla_policy ethnl_header_policy_phy_stats[ETHTOOL_A_HEADER_PHY_INDEX + 1];
extern const struct nla_policy ethnl_strset_get_policy[ETHTOOL_A_STRSET_COUNTS_ONLY + 1];
extern const struct nla_policy ethnl_linkinfo_get_policy[ETHTOOL_A_LINKINFO_HEADER + 1];
extern const struct nla_policy ethnl_linkinfo_set_policy[ETHTOOL_A_LINKINFO_TP_MDIX_CTRL + 1];
--
2.45.1
next prev parent reply other threads:[~2024-06-05 12:49 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-05 12:49 [PATCH net-next v12 00/13] Introduce PHY listing and link_topology tracking Maxime Chevallier
2024-06-05 12:49 ` [PATCH net-next v12 01/13] net: phy: Introduce ethernet link topology representation Maxime Chevallier
2024-06-05 12:49 ` [PATCH net-next v12 02/13] net: sfp: pass the phy_device when disconnecting an sfp module's PHY Maxime Chevallier
2024-06-05 12:49 ` [PATCH net-next v12 03/13] net: phy: add helpers to handle sfp phy connect/disconnect Maxime Chevallier
2024-06-06 3:10 ` Jakub Kicinski
2024-06-06 6:57 ` Maxime Chevallier
2024-06-05 12:49 ` [PATCH net-next v12 04/13] net: sfp: Add helper to return the SFP bus name Maxime Chevallier
2024-06-05 12:49 ` Maxime Chevallier [this message]
2024-06-05 12:49 ` [PATCH net-next v12 06/13] netlink: specs: add phy-index as a header parameter Maxime Chevallier
2024-06-05 12:49 ` [PATCH net-next v12 07/13] net: ethtool: Introduce a command to list PHYs on an interface Maxime Chevallier
2024-06-05 12:49 ` [PATCH net-next v12 08/13] netlink: specs: add ethnl PHY_GET command set Maxime Chevallier
2024-06-05 12:49 ` [PATCH net-next v12 09/13] net: ethtool: plca: Target the command to the requested PHY Maxime Chevallier
2024-06-05 12:49 ` [PATCH net-next v12 10/13] net: ethtool: pse-pd: " Maxime Chevallier
2024-06-06 8:41 ` Kory Maincent
2024-06-05 12:49 ` [PATCH net-next v12 11/13] net: ethtool: cable-test: " Maxime Chevallier
2024-06-05 12:49 ` [PATCH net-next v12 12/13] net: ethtool: strset: Allow querying phy stats by index Maxime Chevallier
2024-06-05 12:49 ` [PATCH net-next v12 13/13] Documentation: networking: document phy_link_topology Maxime Chevallier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240605124920.720690-6-maxime.chevallier@bootlin.com \
--to=maxime.chevallier@bootlin.com \
--cc=andrew@lunn.ch \
--cc=atenart@kernel.org \
--cc=christophe.leroy@csgroup.eu \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=herve.codina@bootlin.com \
--cc=hkallweit1@gmail.com \
--cc=horms@kernel.org \
--cc=jesse.brandeburg@intel.com \
--cc=kabel@kernel.org \
--cc=kory.maincent@bootlin.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mwojtas@chromium.org \
--cc=nathan@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nicveronese@gmail.com \
--cc=o.rempel@pengutronix.de \
--cc=pabeni@redhat.com \
--cc=piergiorgio.beruto@gmail.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®