From: <michael.nemanov@ti.com>
To: Sabeeh Khan <sabeeh-khan@ti.com>, Kalle Valo <kvalo@kernel.org>,
Johannes Berg <johannes.berg@intel.com>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: <linux-wireless@vger.kernel.org>, <netdev@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Michael Nemanov <Michael.Nemanov@ti.com>
Subject: [PATCH v2 11/17] wifi: cc33xx: Add init.c, init.h
Date: Sun, 9 Jun 2024 21:20:56 +0300 [thread overview]
Message-ID: <20240609182102.2950457-12-michael.nemanov@ti.com> (raw)
In-Reply-To: <20240609182102.2950457-1-michael.nemanov@ti.com>
From: Michael Nemanov <Michael.Nemanov@ti.com>
High-level init code for new vifs
---
drivers/net/wireless/ti/cc33xx/init.c | 236 ++++++++++++++++++++++++++
drivers/net/wireless/ti/cc33xx/init.h | 15 ++
2 files changed, 251 insertions(+)
create mode 100644 drivers/net/wireless/ti/cc33xx/init.c
create mode 100644 drivers/net/wireless/ti/cc33xx/init.h
diff --git a/drivers/net/wireless/ti/cc33xx/init.c b/drivers/net/wireless/ti/cc33xx/init.c
new file mode 100644
index 000000000000..f338901ea96d
--- /dev/null
+++ b/drivers/net/wireless/ti/cc33xx/init.c
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <linux/firmware.h>
+#include "acx.h"
+#include "cmd.h"
+#include "conf.h"
+#include "event.h"
+#include "tx.h"
+#include "init.h"
+
+static int cc33xx_init_phy_vif_config(struct cc33xx *cc,
+ struct cc33xx_vif *wlvif)
+{
+ int ret;
+
+ ret = cc33xx_acx_slot(cc, wlvif, DEFAULT_SLOT_TIME);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int cc33xx_init_sta_beacon_filter(struct cc33xx *cc,
+ struct cc33xx_vif *wlvif)
+{
+ int ret;
+
+ ret = cc33xx_acx_beacon_filter_table(cc, wlvif);
+ if (ret < 0)
+ return ret;
+
+ /* disable beacon filtering until we get the first beacon */
+ ret = cc33xx_acx_beacon_filter_opt(cc, wlvif, false);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int cc33xx_ap_init_templates(struct cc33xx *cc,
+ struct ieee80211_vif *vif)
+{
+ struct cc33xx_vif *wlvif = cc33xx_vif_to_data(vif);
+ int ret;
+
+ /* when operating as AP we want to receive external beacons for
+ * configuring ERP protection.
+ */
+ ret = cc33xx_acx_beacon_filter_opt(cc, wlvif, false);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static void cc33xx_set_ba_policies(struct cc33xx *cc, struct cc33xx_vif *wlvif)
+{
+ /* Reset the BA RX indicators */
+ wlvif->ba_allowed = true;
+ cc->ba_rx_session_count = 0;
+
+ /* BA is supported in STA/AP modes */
+ wlvif->ba_support = (wlvif->bss_type != BSS_TYPE_AP_BSS &&
+ wlvif->bss_type != BSS_TYPE_STA_BSS);
+}
+
+/* vif-specifc initialization */
+static int cc33xx_init_sta_role(struct cc33xx *cc, struct cc33xx_vif *wlvif)
+{
+ int ret = cc33xx_acx_group_address_tbl(cc, true, NULL, 0);
+
+ if (ret < 0)
+ return ret;
+
+ /* Beacon filtering */
+ ret = cc33xx_init_sta_beacon_filter(cc, wlvif);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+/* vif-specific initialization */
+static int cc33xx_init_ap_role(struct cc33xx *cc, struct cc33xx_vif *wlvif)
+{
+ int ret;
+
+ /* initialize Tx power */
+ ret = cc33xx_acx_tx_power(cc, wlvif, wlvif->power_level);
+ if (ret < 0)
+ return ret;
+
+ if (cc->radar_debug_mode)
+ cc33xx_cmd_generic_cfg(cc, wlvif,
+ CC33XX_CFG_FEATURE_RADAR_DEBUG,
+ cc->radar_debug_mode, 0);
+
+ return 0;
+}
+
+int cc33xx_init_vif_specific(struct cc33xx *cc, struct ieee80211_vif *vif)
+{
+ struct cc33xx_vif *wlvif = cc33xx_vif_to_data(vif);
+ struct conf_tx_ac_category *conf_ac;
+ struct conf_tx_ac_category ac_conf[4];
+ struct conf_tx_tid tid_conf[8];
+ struct conf_tx_settings *tx_settings = &cc->conf.host_conf.tx;
+ struct conf_tx_ac_category *p_wl_host_ac_conf = &tx_settings->ac_conf0;
+ struct conf_tx_tid *p_wl_host_tid_conf = &tx_settings->tid_conf0;
+ bool is_ap = (wlvif->bss_type == BSS_TYPE_AP_BSS);
+ u8 ps_scheme = cc->conf.mac.ps_scheme;
+ int ret, i;
+
+ /* consider all existing roles before configuring psm. */
+
+ if (cc->ap_count == 0 && is_ap) { /* first AP */
+ ret = cc33xx_acx_sleep_auth(cc, CC33XX_PSM_ELP);
+ if (ret < 0)
+ return ret;
+
+ /* unmask ap events */
+ cc->event_mask |= cc->ap_event_mask;
+
+ /* first STA, no APs */
+ } else if (cc->sta_count == 0 && cc->ap_count == 0 && !is_ap) {
+ u8 sta_auth = cc->conf.host_conf.conn.sta_sleep_auth;
+ /* Configure for power according to debugfs */
+ if (sta_auth != CC33XX_PSM_ILLEGAL)
+ ret = cc33xx_acx_sleep_auth(cc, sta_auth);
+ /* Configure for ELP power saving */
+ else
+ ret = cc33xx_acx_sleep_auth(cc, CC33XX_PSM_ELP);
+
+ if (ret < 0)
+ return ret;
+ }
+
+ /* Mode specific init */
+ if (is_ap) {
+ ret = cc33xx_init_ap_role(cc, wlvif);
+ if (ret < 0)
+ return ret;
+ } else {
+ ret = cc33xx_init_sta_role(cc, wlvif);
+ if (ret < 0)
+ return ret;
+ }
+
+ cc33xx_init_phy_vif_config(cc, wlvif);
+
+ /* Default TID/AC configuration */
+ WARN_ON(tx_settings->tid_conf_count != tx_settings->ac_conf_count);
+ memcpy(ac_conf, p_wl_host_ac_conf, 4 * sizeof(struct conf_tx_ac_category));
+ memcpy(tid_conf, p_wl_host_tid_conf, 8 * sizeof(struct conf_tx_tid));
+
+ for (i = 0; i < tx_settings->tid_conf_count; i++) {
+ conf_ac = &ac_conf[i];
+
+ /* If no ps poll is used, send legacy ps scheme in cmd */
+ if (ps_scheme == PS_SCHEME_NOPSPOLL)
+ ps_scheme = PS_SCHEME_LEGACY;
+
+ ret = cc33xx_tx_param_cfg(cc, wlvif, conf_ac->ac,
+ conf_ac->cw_min, conf_ac->cw_max,
+ conf_ac->aifsn, conf_ac->tx_op_limit,
+ false, ps_scheme, conf_ac->is_mu_edca,
+ conf_ac->mu_edca_aifs,
+ conf_ac->mu_edca_ecw_min_max,
+ conf_ac->mu_edca_timer);
+
+ if (ret < 0)
+ return ret;
+ }
+
+ /* Mode specific init - post mem init */
+ if (is_ap)
+ ret = cc33xx_ap_init_templates(cc, vif);
+
+ if (ret < 0)
+ return ret;
+
+ /* Configure initiator BA sessions policies */
+ cc33xx_set_ba_policies(cc, wlvif);
+
+ return 0;
+}
+
+int cc33xx_hw_init(struct cc33xx *cc)
+{
+ cc33xx_acx_init_mem_config(cc);
+
+ cc33xx_debug(DEBUG_TX, "available tx blocks: %d", 16);
+ cc->last_fw_rls_idx = 0;
+ cc->partial_rx.status = CURR_RX_START;
+ return 0;
+}
+
+int cc33xx_download_ini_params_and_wait(struct cc33xx *cc)
+{
+ struct cc33xx_cmd_ini_params_download *cmd;
+ size_t command_size = ALIGN((sizeof(*cmd) + sizeof(cc->conf)), 4);
+ int ret;
+
+ cc33xx_set_max_buffer_size(cc, INI_MAX_BUFFER_SIZE);
+
+ cc33xx_debug(DEBUG_ACX,
+ "Downloading INI configurations to FW, payload Length: %zu",
+ sizeof(cc->conf));
+
+ cmd = kzalloc(command_size, GFP_KERNEL);
+ if (!cmd) {
+ cc33xx_set_max_buffer_size(cc, CMD_MAX_BUFFER_SIZE);
+ return -ENOMEM;
+ }
+
+ cmd->length = cpu_to_le32(sizeof(cc->conf));
+
+ /* copy INI file params payload */
+ memcpy((cmd->payload), &cc->conf, sizeof(cc->conf));
+
+ ret = cc33xx_cmd_send(cc, CMD_DOWNLOAD_INI_PARAMS,
+ cmd, command_size, 0);
+ if (ret < 0) {
+ cc33xx_warning("download INI params to FW command sending failed: %d",
+ ret);
+ } else {
+ cc33xx_debug(DEBUG_BOOT, "INI Params downloaded successfully");
+ }
+
+ cc33xx_set_max_buffer_size(cc, CMD_MAX_BUFFER_SIZE);
+ kfree(cmd);
+ return ret;
+}
diff --git a/drivers/net/wireless/ti/cc33xx/init.h b/drivers/net/wireless/ti/cc33xx/init.h
new file mode 100644
index 000000000000..b0bc6a548611
--- /dev/null
+++ b/drivers/net/wireless/ti/cc33xx/init.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only
+ *
+ * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#ifndef __INIT_H__
+#define __INIT_H__
+
+#include "cc33xx.h"
+
+int cc33xx_hw_init(struct cc33xx *cc);
+int cc33xx_download_ini_params_and_wait(struct cc33xx *cc);
+int cc33xx_init_vif_specific(struct cc33xx *cc, struct ieee80211_vif *vif);
+
+#endif /* __INIT_H__ */
--
2.25.1
next prev parent reply other threads:[~2024-06-09 18:23 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-09 18:20 [PATCH v2 00/17] wifi: cc33xx: Add driver for new TI CC33xx wireless device family michael.nemanov
2024-06-09 18:20 ` [PATCH v2 01/17] wifi: cc33xx: Add cc33xx.h, cc33xx_i.h michael.nemanov
2024-06-09 18:20 ` [PATCH v2 02/17] wifi: cc33xx: Add debug.h michael.nemanov
2024-06-09 18:20 ` [PATCH v2 03/17] wifi: cc33xx: Add sdio.c, io.c, io.h michael.nemanov
2024-06-09 18:20 ` [PATCH v2 04/17] wifi: cc33xx: Add cmd.c, cmd.h michael.nemanov
2024-06-09 18:20 ` [PATCH v2 05/17] wifi: cc33xx: Add acx.c, acx.h michael.nemanov
2024-06-09 18:20 ` [PATCH v2 06/17] wifi: cc33xx: Add event.c, event.h michael.nemanov
2024-06-09 18:20 ` [PATCH v2 07/17] wifi: cc33xx: Add boot.c, boot.h michael.nemanov
2024-06-09 18:20 ` [PATCH v2 08/17] wifi: cc33xx: Add main.c michael.nemanov
2024-06-09 18:20 ` [PATCH v2 09/17] wifi: cc33xx: Add rx.c, rx.h michael.nemanov
2024-06-09 18:20 ` [PATCH v2 10/17] wifi: cc33xx: Add tx.c, tx.h michael.nemanov
2024-06-09 18:20 ` michael.nemanov [this message]
2024-06-15 8:51 ` [PATCH v2 11/17] wifi: cc33xx: Add init.c, init.h Simon Horman
2024-06-20 8:40 ` Nemanov, Michael
2024-06-20 16:30 ` Simon Horman
2024-06-20 16:52 ` Nemanov, Michael
2024-06-09 18:20 ` [PATCH v2 12/17] wifi: cc33xx: Add scan.c, scan.h michael.nemanov
2024-06-09 18:20 ` [PATCH v2 13/17] wifi: cc33xx: Add conf.h michael.nemanov
2024-06-09 18:20 ` [PATCH v2 14/17] wifi: cc33xx: Add ps.c, ps.h michael.nemanov
2024-06-09 18:21 ` [PATCH v2 15/17] wifi: cc33xx: Add testmode.c, testmode.h michael.nemanov
2024-06-09 18:21 ` [PATCH v2 16/17] wifi: cc33xx: Add Kconfig, Makefile Integrate cc33xx into wireless/ti folder michael.nemanov
2024-06-09 18:21 ` [PATCH v2 17/17] dt-bindings: net: wireless: cc33xx: Add ti,cc33xx.yaml michael.nemanov
2024-06-10 8:16 ` Krzysztof Kozlowski
2024-06-10 8:17 ` Krzysztof Kozlowski
2024-06-13 7:39 ` Nemanov, Michael
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240609182102.2950457-12-michael.nemanov@ti.com \
--to=michael.nemanov@ti.com \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=johannes.berg@intel.com \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=kvalo@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=robh@kernel.org \
--cc=sabeeh-khan@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®