From: "Chang S. Bae" <chang.seok.bae@intel.com>
To: ebiggers@kernel.org, linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, bernie.keany@intel.com,
chang.seok.bae@intel.com
Subject: [PATCH v9b 14/14] crypto: x86/aes-kl - Implement the AES-XTS algorithm
Date: Tue, 11 Jun 2024 14:35:48 -0700 [thread overview]
Message-ID: <20240611213548.253079-1-chang.seok.bae@intel.com> (raw)
In-Reply-To: <20240531053718.GF6505@sol.localdomain>
Hi Eric,
I really appreciate your review. Keeping track of about 800 lines of
code, including assembly lines, in a single patch is demanding. I hope
this version meets your expectations.
The overall diff can be found here:
https://github.com/intel-staging/keylocker/compare/f8420d4e27fc..57472d9b3f8e
Thanks,
Chang
---
Key Locker is a CPU feature to reduce key exfiltration opportunities.
It converts the AES key into an encoded form, called 'key handle', to
reduce the exposure of private key material in memory.
This key conversion along with all subsequent data transformations, is
provided by new AES instructions ('AES-KL'). AES-KL is analogous to
that of AES-NI as maintains a similar programming interface.
Support the XTS mode as the primary use case is dm-crypt. The support has
some details worth mentioning, which differentiate itself from AES-NI,
that users may need to be aware of:
== Key Handle Restriction ==
The AES-KL instruction set supports selecting key usage restrictions at
key handle creation time. Restrict all key handles created by the kernel
to kernel mode use only.
Although the AES-KL instructions themselves are executable in userspace,
this restriction enforces the mode consistency in its operation.
If the key handle is created in userspace but referenced in the kernel,
then encrypt() and decrypt() functions will return -EINVAL.
=== AES-NI Dependency for AES Compliance ===
Key Locker is not AES compliant as it lacks 192-bit key support. However,
per the expectations of Linux crypto-cipher implementations, the software
cipher implementation must support all the AES-compliant key sizes.
The AES-KL cipher implementation achieves this constraint by logging a
warning and falling back to AES-NI. In other words, the 192-bit key-size
limitation is documented but not enforced.
== Wrapping Key Restore Failure Handling ==
In the event of hardware failure, the wrapping key is lost from deep
sleep states. Then, the wrapping key turns to zero which is an unusable
state.
The x86 core provides valid_keylocker() to indicate the failure.
Subsequent setkey() as well as encode()/decode() can check it and return
-ENODEV if failed. This allows an error code to be returned instead of
encountering abrupt exceptions.
== Userspace Exposition ==
Keylocker implementations have measurable performance penalties.
Therefore, keep the current default remains the same.
However, with a slow storage device, storage bandwidth is the bottleneck,
even if disk encryption is enabled by AES-KL. Thus, it is up to the end
user to decide whether to use AES-KL. User can select it by the name
'xts-aes-aeskl' shown in /proc/crypto.
== 64-bit Only ==
Support 64-bit only, as the 32-bit kernel is being deprecated.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
---
Changes from the previous posting (Eric):
* Assembly Code
- Improve function argument descriptions.
- Simplify the AES processing macro.
- Rename some symbols.
* Glue Code:
- Do not use function pointer variables; direct calls.
- Define a union for the two 'ctx' structures.
- Clarify a few code spots with comments.
- Adjust some variable and struct names.
* Kconfig
- Separate out the Kconfig.assembler change.
---
arch/x86/crypto/Kconfig | 18 ++
arch/x86/crypto/Makefile | 3 +
arch/x86/crypto/aeskl-xts-x86_64.S | 337 ++++++++++++++++++++++++
arch/x86/crypto/aeskl_glue.c | 409 +++++++++++++++++++++++++++++
arch/x86/crypto/aesni-intel_glue.c | 13 +-
arch/x86/crypto/aesni-xts.h | 15 ++
6 files changed, 790 insertions(+), 5 deletions(-)
create mode 100644 arch/x86/crypto/aeskl-xts-x86_64.S
create mode 100644 arch/x86/crypto/aeskl_glue.c
create mode 100644 arch/x86/crypto/aesni-xts.h
diff --git a/arch/x86/crypto/Kconfig b/arch/x86/crypto/Kconfig
index c9e59589a1ce..c45d8f48f24e 100644
--- a/arch/x86/crypto/Kconfig
+++ b/arch/x86/crypto/Kconfig
@@ -29,6 +29,24 @@ config CRYPTO_AES_NI_INTEL
Architecture: x86 (32-bit and 64-bit) using:
- AES-NI (AES new instructions)
+config CRYPTO_AES_KL
+ tristate "Ciphers: AES, modes: XTS (AES-KL)"
+ depends on X86 && 64BIT
+ depends on AS_KEYLOCKER
+ select CRYPTO_AES_NI_INTEL
+ select CRYPTO_SIMD
+ select X86_KEYLOCKER
+
+ help
+ Block cipher: AES cipher algorithms
+ Length-preserving ciphers: AES with XTS
+
+ Architecture: x86 (64-bit) using:
+ - AES-KL (AES Key Locker)
+ - AES-NI for a 192-bit key
+
+ See Documentation/arch/x86/keylocker.rst for more details.
+
config CRYPTO_BLOWFISH_X86_64
tristate "Ciphers: Blowfish, modes: ECB, CBC"
depends on X86 && 64BIT
diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile
index 9c5ce5613738..c46fd2d9dd16 100644
--- a/arch/x86/crypto/Makefile
+++ b/arch/x86/crypto/Makefile
@@ -51,6 +51,9 @@ aesni-intel-y := aesni-intel_asm.o aesni-intel_glue.o
aesni-intel-$(CONFIG_64BIT) += aesni-intel_avx-x86_64.o \
aes_ctrby8_avx-x86_64.o aes-xts-avx-x86_64.o
+obj-$(CONFIG_CRYPTO_AES_KL) += aeskl-x86_64.o
+aeskl-x86_64-y := aeskl-xts-x86_64.o aeskl_glue.o
+
obj-$(CONFIG_CRYPTO_SHA1_SSSE3) += sha1-ssse3.o
sha1-ssse3-y := sha1_avx2_x86_64_asm.o sha1_ssse3_asm.o sha1_ssse3_glue.o
sha1-ssse3-$(CONFIG_AS_SHA1_NI) += sha1_ni_asm.o
diff --git a/arch/x86/crypto/aeskl-xts-x86_64.S b/arch/x86/crypto/aeskl-xts-x86_64.S
new file mode 100644
index 000000000000..261d03789452
--- /dev/null
+++ b/arch/x86/crypto/aeskl-xts-x86_64.S
@@ -0,0 +1,337 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Implement AES algorithm using AES Key Locker instructions.
+ *
+ * Most code is primarily derived from aesni-intel_asm.S and
+ * stylistically aligned with aes-xts-avx-x86_64.S.
+ */
+
+#include <linux/linkage.h>
+#include <asm/errno.h>
+#include <asm/inst.h>
+
+.section .rodata
+.p2align 4
+.Lgf_poly:
+ /*
+ * Represents the polynomial x^7 + x^2 + x + 1, where the low 64
+ * bits are XOR'd into the tweak's low 64 bits when a carry
+ * occurs from the high 64 bits.
+ */
+ .quad 0x87, 1
+
+ /*
+ * Table of constants for variable byte shifts and blending
+ * during ciphertext stealing operations.
+ */
+.Lcts_permute_table:
+ .byte 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80
+ .byte 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80
+ .byte 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
+ .byte 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f
+ .byte 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80
+ .byte 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80
+
+.text
+
+.set TWEAK_NEXT1, %xmm8
+.set TWEAK_NEXT2, %xmm9
+.set TWEAK_NEXT3, %xmm10
+.set TWEAK_NEXT4, %xmm11
+.set TWEAK_NEXT5, %xmm12
+.set TWEAK_NEXT6, %xmm13
+.set TWEAK_NEXT7, %xmm14
+.set GF_POLY, %xmm15
+.set TWEAK_TMP, TWEAK_NEXT1
+.set TWEAK_NEXT, TWEAK_NEXT2
+.set TMP, %r10
+.set KLEN, %r9d
+
+/*
+ * void __aeskl_setkey(struct crypto_aes_ctx *handle, const u8 *key,
+ * unsigned int keylen)
+ */
+SYM_FUNC_START(__aeskl_setkey)
+ .set HANDLE, %rdi /* Pointer to struct aeskl_ctx */
+ .set KEY, %rsi /* Pointer to the original key */
+ .set KEYLEN, %edx /* AES key length in bytes */
+ movl KEYLEN, 480(HANDLE)
+ vmovdqu (KEY), %xmm0
+ mov $1, %eax
+ cmp $16, %dl
+ je .Lsetkey_128
+
+ vmovdqu 0x10(KEY), %xmm1
+ encodekey256 %eax, %eax
+ vmovdqu %xmm3, 0x30(HANDLE)
+ jmp .Lsetkey_end
+.Lsetkey_128:
+ encodekey128 %eax, %eax
+
+.Lsetkey_end:
+ vmovdqu %xmm0, 0x00(HANDLE)
+ vmovdqu %xmm1, 0x10(HANDLE)
+ vmovdqu %xmm2, 0x20(HANDLE)
+ RET
+SYM_FUNC_END(__aeskl_setkey)
+
+.macro _aeskl operation
+ cmp $16, KLEN
+ je .Laes_128\@
+.ifc \operation, dec
+ aesdec256kl (HANDLE), %xmm0
+.else
+ aesenc256kl (HANDLE), %xmm0
+.endif
+ jmp .Laes_end\@
+.Laes_128\@:
+.ifc \operation, dec
+ aesdec128kl (HANDLE), %xmm0
+.else
+ aesenc128kl (HANDLE), %xmm0
+.endif
+.Laes_end\@:
+.endm
+
+.macro _aesklwide operation
+ cmp $16, KLEN
+ je .Laesw_128\@
+.ifc \operation, dec
+ aesdecwide256kl (HANDLE)
+.else
+ aesencwide256kl (HANDLE)
+.endif
+ jmp .Laesw_end\@
+.Laesw_128\@:
+.ifc \operation, dec
+ aesdecwide128kl (HANDLE)
+.else
+ aesencwide128kl (HANDLE)
+.endif
+.Laesw_end\@:
+.endm
+
+/* int __aeskl_enc(const void *handle, u8 *dst, const u8 *src) */
+SYM_FUNC_START(__aeskl_enc)
+ .set HANDLE, %rdi /* Pointer to struct aeskl_ctx */
+ .set DST, %rsi /* Pointer to next destination data */
+ .set SRC, %rdx /* Pointer to next source data */
+ vmovdqu (SRC), %xmm0
+ movl 480(HANDLE), KLEN
+
+ _aeskl enc
+ jz .Lerror
+ xor %rax, %rax
+ vmovdqu %xmm0, (DST)
+ RET
+.Lerror:
+ mov $(-EINVAL), %eax
+ RET
+SYM_FUNC_END(__aeskl_enc)
+
+/*
+ * Calculate the next 128-bit XTS tweak by multiplying the polynomial 'x'
+ * with the current tweak stored in the register \src, and store the
+ * result in the \dst register.
+ */
+.macro _next_tweak src, tmp, dst
+ vpshufd $0x13, \src, \tmp
+ vpaddq \src, \src, \dst
+ vpsrad $31, \tmp, \tmp
+ vpand GF_POLY, \tmp, \tmp
+ vpxor \tmp, \dst, \dst
+.endm
+
+.macro _aeskl_xts_crypt operation
+ vmovdqa .Lgf_poly(%rip), GF_POLY
+ vmovups (TWEAK), TWEAK_NEXT
+ mov 480(HANDLE), KLEN
+
+.ifc \operation, dec
+ /*
+ * During decryption, if the message length is not a multiple of
+ * the AES block length, exclude the last complete block from the
+ * decryption loop by subtracting 16 from LEN. This adjustment is
+ * necessary because ciphertext stealing decryption uses the last
+ * two tweaks in reverse order. Special handling is required for
+ * the last complete block and any remaining partial block at the
+ * end.
+ */
+ test $15, LEN
+ jz .L8block_at_a_time\@
+ sub $16, LEN
+.endif
+
+.L8block_at_a_time\@:
+ sub $128, LEN
+ jl .Lhandle_remainder\@
+
+ vpxor (SRC), TWEAK_NEXT, %xmm0
+ vmovups TWEAK_NEXT, (DST)
+
+ /*
+ * Calculate and cache tweak values. Note that the tweak
+ * computation cannot be interleaved with AES rounds here using
+ * Key Locker instructions.
+ */
+ _next_tweak TWEAK_NEXT, %xmm1, TWEAK_NEXT1
+ _next_tweak TWEAK_NEXT1, %xmm1, TWEAK_NEXT2
+ _next_tweak TWEAK_NEXT2, %xmm1, TWEAK_NEXT3
+ _next_tweak TWEAK_NEXT3, %xmm1, TWEAK_NEXT4
+ _next_tweak TWEAK_NEXT4, %xmm1, TWEAK_NEXT5
+ _next_tweak TWEAK_NEXT5, %xmm1, TWEAK_NEXT6
+ _next_tweak TWEAK_NEXT6, %xmm1, TWEAK_NEXT7
+
+ /* XOR each source block with its tweak. */
+ vpxor 0x10(SRC), TWEAK_NEXT1, %xmm1
+ vpxor 0x20(SRC), TWEAK_NEXT2, %xmm2
+ vpxor 0x30(SRC), TWEAK_NEXT3, %xmm3
+ vpxor 0x40(SRC), TWEAK_NEXT4, %xmm4
+ vpxor 0x50(SRC), TWEAK_NEXT5, %xmm5
+ vpxor 0x60(SRC), TWEAK_NEXT6, %xmm6
+ vpxor 0x70(SRC), TWEAK_NEXT7, %xmm7
+
+ /* Encrypt or decrypt 8 blocks per iteration. */
+ _aesklwide \operation
+ jz .Lerror\@
+
+ /* XOR tweaks again. */
+ vpxor (DST), %xmm0, %xmm0
+ vpxor TWEAK_NEXT1, %xmm1, %xmm1
+ vpxor TWEAK_NEXT2, %xmm2, %xmm2
+ vpxor TWEAK_NEXT3, %xmm3, %xmm3
+ vpxor TWEAK_NEXT4, %xmm4, %xmm4
+ vpxor TWEAK_NEXT5, %xmm5, %xmm5
+ vpxor TWEAK_NEXT6, %xmm6, %xmm6
+ vpxor TWEAK_NEXT7, %xmm7, %xmm7
+
+ /* Store destination blocks. */
+ vmovdqu %xmm0, 0x00(DST)
+ vmovdqu %xmm1, 0x10(DST)
+ vmovdqu %xmm2, 0x20(DST)
+ vmovdqu %xmm3, 0x30(DST)
+ vmovdqu %xmm4, 0x40(DST)
+ vmovdqu %xmm5, 0x50(DST)
+ vmovdqu %xmm6, 0x60(DST)
+ vmovdqu %xmm7, 0x70(DST)
+
+ _next_tweak TWEAK_NEXT7, TWEAK_TMP, TWEAK_NEXT
+ add $128, SRC
+ add $128, DST
+ test LEN, LEN
+ jz .Lend\@
+ jmp .L8block_at_a_time\@
+
+.Lhandle_remainder\@:
+ add $128, LEN
+ jz .Lend\@
+.ifc \operation, enc
+ vmovdqu %xmm7, %xmm0
+.endif
+ sub $16, LEN
+ jl .Lcts\@
+
+ /* Encrypt or decrypt one block per iteration */
+.Lblock_at_a_time\@:
+ vpxor (SRC), TWEAK_NEXT, %xmm0
+ _aeskl \operation
+ jz .Lerror\@
+ vpxor TWEAK_NEXT, %xmm0, %xmm0
+ _next_tweak TWEAK_NEXT, TWEAK_TMP, TWEAK_NEXT
+ test LEN, LEN
+ jz .Lout\@
+
+ add $16, SRC
+ vmovdqu %xmm0, (DST)
+ add $16, DST
+ sub $16, LEN
+ jge .Lblock_at_a_time\@
+
+.Lcts\@:
+.ifc \operation, dec
+ /*
+ * If decrypting, the last block was not decrypted because CTS
+ * decryption uses the last two tweaks in reverse order. This is
+ * done by advancing the tweak and decrypting the last block.
+ */
+ _next_tweak TWEAK_NEXT, TWEAK_TMP, %xmm4
+ vpxor (SRC), %xmm4, %xmm0
+ _aeskl \operation
+ jz .Lerror\@
+ vpxor %xmm4, %xmm0, %xmm0
+ add $16, SRC
+.else
+ /*
+ * If encrypting, the last block was already encrypted in %xmm0.
+ * Prepare the CTS encryption by rewinding the pointer.
+ */
+ sub $16, DST
+.endif
+ lea .Lcts_permute_table(%rip), TMP
+
+ /* Load the source partial block */
+ vmovdqu (SRC, LEN, 1), %xmm3
+
+ /*
+ * Shift the first LEN bytes of the encryption and decryption of
+ * the last block to the end of a register, then store it to
+ * DST+LEN.
+ */
+ add $16, LEN
+ vpshufb (TMP, LEN, 1), %xmm0, %xmm2
+ vmovdqu %xmm2, (DST, LEN, 1)
+
+ /* Shift the source partial block to the beginning */
+ sub LEN, TMP
+ vmovdqu 32(TMP), %xmm2
+ vpshufb %xmm2, %xmm3, %xmm3
+
+ /* Blend to generate the source partial block */
+ vpblendvb %xmm2, %xmm0, %xmm3, %xmm3
+
+ /* Encrypt or decrypt again and store the last block. */
+ vpxor TWEAK_NEXT, %xmm3, %xmm0
+ _aeskl \operation
+ jz .Lerror\@
+ vpxor TWEAK_NEXT, %xmm0, %xmm0
+ vmovdqu %xmm0, (DST)
+
+ xor %rax, %rax
+ RET
+.Lout\@:
+ vmovdqu %xmm0, (DST)
+.Lend\@:
+ vmovups TWEAK_NEXT, (TWEAK)
+ xor %rax, %rax
+ RET
+.Lerror\@:
+ mov $(-EINVAL), %eax
+ RET
+.endm
+
+/*
+ * int __aeskl_xts_encrypt(const struct aeskl_ctx *handle, u8 *dst,
+ * const u8 *src, unsigned int len, u8 *tweak)
+ */
+SYM_FUNC_START(__aeskl_xts_encrypt)
+ .set HANDLE, %rdi /* Pointer to struct aeskl_ctx */
+ .set DST, %rsi /* Pointer to next destination data */
+ .set SRC, %rdx /* Pointer to next source data */
+ .set LEN, %rcx /* Remaining length in bytes */
+ .set TWEAK, %r8 /* Pointer to next tweak */
+ _aeskl_xts_crypt enc
+SYM_FUNC_END(__aeskl_xts_encrypt)
+
+/*
+ * int __aeskl_xts_decrypt(const struct crypto_aes_ctx *handle, u8 *dst,
+ * const u8 *src, unsigned int len, u8 *tweak)
+ */
+SYM_FUNC_START(__aeskl_xts_decrypt)
+ .set HANDLE, %rdi /* Pointer to struct aeskl_ctx */
+ .set DST, %rsi /* Pointer to next destination data */
+ .set SRC, %rdx /* Pointer to next source data */
+ .set LEN, %rcx /* Remaining length in bytes */
+ .set TWEAK, %r8 /* Pointer to next tweak */
+ _aeskl_xts_crypt dec
+SYM_FUNC_END(__aeskl_xts_decrypt)
+
diff --git a/arch/x86/crypto/aeskl_glue.c b/arch/x86/crypto/aeskl_glue.c
new file mode 100644
index 000000000000..51b8daf7e72a
--- /dev/null
+++ b/arch/x86/crypto/aeskl_glue.c
@@ -0,0 +1,409 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Support for AES Key Locker instructions. This file contains glue
+ * code and the real AES implementation is in aeskl-xts-x86_64.S.
+ *
+ * Most code is based on aesni-intel_glue.c
+ */
+
+#include <linux/err.h>
+#include <linux/types.h>
+#include <linux/module.h>
+
+#include <crypto/aes.h>
+#include <crypto/xts.h>
+#include <crypto/scatterwalk.h>
+#include <crypto/internal/simd.h>
+#include <crypto/internal/skcipher.h>
+
+#include <asm/fpu/api.h>
+#include <asm/keylocker.h>
+#include <asm/simd.h>
+
+#include "aesni-xts.h"
+
+#define AES_ALIGN 16
+#define AES_ALIGN_ATTR __attribute__ ((__aligned__(AES_ALIGN)))
+#define AES_ALIGN_EXTRA ((AES_ALIGN - 1) & ~(CRYPTO_MINALIGN - 1))
+
+#define AESKL_AAD_SIZE 16
+#define AESKL_TAG_SIZE 16
+#define AESKL_CIPHERTEXT_MAX AES_KEYSIZE_256
+
+/* The Key Locker handle is an encoded form of the AES key. */
+struct aeskl_handle {
+ u8 additional_authdata[AESKL_AAD_SIZE];
+ u8 integrity_tag[AESKL_TAG_SIZE];
+ u8 cipher_text[AESKL_CIPHERTEXT_MAX];
+};
+
+/*
+ * Key Locker does not support 192-bit key size. The driver needs to
+ * retrieve the key size in the first place. The offset of the
+ * 'key_length' field here must be compatible with struct
+ * crypto_aes_ctx.
+ */
+#define AESKL_CTX_RESERVED (sizeof(struct crypto_aes_ctx) \
+ - sizeof(struct aeskl_handle) \
+ - sizeof(u32))
+
+struct aeskl_ctx {
+ struct aeskl_handle handle;
+ u8 reserved[AESKL_CTX_RESERVED];
+ u32 key_length;
+};
+
+/*
+ * Unify the two context structures to represent the crypto context.
+ * Depending on the key size, either AES-KL or AES-NI will be used.
+ */
+union x86_aes_ctx {
+ struct aeskl_ctx aeskl;
+ struct crypto_aes_ctx aesni;
+};
+
+struct xts_aes_ctx {
+ union x86_aes_ctx tweak_ctx AES_ALIGN_ATTR;
+ union x86_aes_ctx crypt_ctx AES_ALIGN_ATTR;
+};
+
+static inline struct xts_aes_ctx *xts_aes_ctx(struct crypto_skcipher *tfm)
+{
+ void *addr = crypto_skcipher_ctx(tfm);
+
+ if (crypto_tfm_ctx_alignment() >= AES_ALIGN)
+ return addr;
+
+ return PTR_ALIGN(addr, AES_ALIGN);
+}
+
+static inline u32 xts_keylen(struct skcipher_request *req)
+{
+ struct xts_aes_ctx *ctx = xts_aes_ctx(crypto_skcipher_reqtfm(req));
+
+ BUILD_BUG_ON(offsetof(struct crypto_aes_ctx, key_length) !=
+ offsetof(struct aeskl_ctx, key_length));
+
+ return ctx->crypt_ctx.aeskl.key_length;
+}
+
+asmlinkage void __aeskl_setkey(struct aeskl_ctx *handle, const u8 *key, unsigned int keylen);
+
+asmlinkage int __aeskl_enc(const void *handle, u8 *dst, const u8 *src);
+
+asmlinkage int __aeskl_xts_encrypt(const struct aeskl_ctx *handle, u8 *dst, const u8 *src,
+ unsigned int len, u8 *tweak);
+asmlinkage int __aeskl_xts_decrypt(const struct aeskl_ctx *handle, u8 *dst, const u8 *src,
+ unsigned int len, u8 *tweak);
+
+/*
+ * If a hardware failure occurs, the wrapping key may be lost during
+ * sleep states. The state of the feature can be retrieved via
+ * valid_keylocker().
+ *
+ * Since disabling can occur preemptively, check for availability on
+ * every use along with kernel_fpu_begin().
+ */
+
+static int aeskl_setkey(struct aeskl_ctx *ctx, const u8 *in_key, unsigned int keylen)
+{
+ if (!crypto_simd_usable())
+ return -EBUSY;
+
+ kernel_fpu_begin();
+ if (!valid_keylocker()) {
+ kernel_fpu_end();
+ return -ENODEV;
+ }
+
+ __aeskl_setkey(ctx, in_key, keylen);
+ kernel_fpu_end();
+ return 0;
+}
+
+static int aeskl_xts_encrypt_iv(const struct aeskl_ctx *tweak_key,
+ u8 iv[AES_BLOCK_SIZE])
+{
+ if (!valid_keylocker())
+ return -ENODEV;
+
+ return __aeskl_enc(tweak_key, iv, iv);
+}
+
+static int aeskl_xts_encrypt(const struct aeskl_ctx *key,
+ const u8 *src, u8 *dst, unsigned int len,
+ u8 tweak[AES_BLOCK_SIZE])
+{
+ if (!valid_keylocker())
+ return -ENODEV;
+
+ return __aeskl_xts_encrypt(key, dst, src, len, tweak);
+}
+
+static int aeskl_xts_decrypt(const struct aeskl_ctx *key,
+ const u8 *src, u8 *dst, unsigned int len,
+ u8 tweak[AES_BLOCK_SIZE])
+{
+ if (!valid_keylocker())
+ return -ENODEV;
+
+ return __aeskl_xts_decrypt(key, dst, src, len, tweak);
+}
+
+/*
+ * The glue code in xts_crypt() and xts_crypt_slowpath() follows
+ * aesni-intel_glue.c. While this code is shareable, the key
+ * material format difference can cause more destructive code changes in
+ * the AES-NI side.
+ */
+
+enum xts_ops {
+ XTS_ENCRYPTION,
+ XTS_DECRYPTION
+};
+
+/* This handles cases where the source and/or destination span pages. */
+static noinline int xts_crypt_slowpath(struct skcipher_request *req, enum xts_ops ops)
+{
+ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+ const struct xts_aes_ctx *ctx = xts_aes_ctx(tfm);
+ int tail = req->cryptlen % AES_BLOCK_SIZE;
+ struct scatterlist sg_src[2], sg_dst[2];
+ struct skcipher_request subreq;
+ struct scatterlist *src, *dst;
+ struct skcipher_walk walk;
+ int err;
+
+ /*
+ * If the message length isn't divisible by the AES block size, then
+ * separate off the last full block and the partial block. This ensures
+ * that they are processed in the same call to the assembly function,
+ * which is required for ciphertext stealing.
+ */
+ if (tail) {
+ skcipher_request_set_tfm(&subreq, tfm);
+ skcipher_request_set_callback(&subreq,
+ skcipher_request_flags(req),
+ NULL, NULL);
+ skcipher_request_set_crypt(&subreq, req->src, req->dst,
+ req->cryptlen - tail - AES_BLOCK_SIZE,
+ req->iv);
+ req = &subreq;
+ }
+
+ err = skcipher_walk_virt(&walk, req, false);
+
+ while (walk.nbytes) {
+ kernel_fpu_begin();
+ if (ops == XTS_ENCRYPTION) {
+ err |= aeskl_xts_encrypt(&ctx->crypt_ctx.aeskl, walk.src.virt.addr,
+ walk.dst.virt.addr,
+ walk.nbytes & ~(AES_BLOCK_SIZE - 1), req->iv);
+ } else {
+ err |= aeskl_xts_decrypt(&ctx->crypt_ctx.aeskl, walk.src.virt.addr,
+ walk.dst.virt.addr,
+ walk.nbytes & ~(AES_BLOCK_SIZE - 1), req->iv);
+ }
+ kernel_fpu_end();
+ err |= skcipher_walk_done(&walk,
+ walk.nbytes & (AES_BLOCK_SIZE - 1));
+ }
+
+ if (err || !tail)
+ return err;
+
+ /* Do ciphertext stealing with the last full block and partial block. */
+
+ dst = src = scatterwalk_ffwd(sg_src, req->src, req->cryptlen);
+ if (req->dst != req->src)
+ dst = scatterwalk_ffwd(sg_dst, req->dst, req->cryptlen);
+
+ skcipher_request_set_crypt(req, src, dst, AES_BLOCK_SIZE + tail,
+ req->iv);
+
+ err = skcipher_walk_virt(&walk, req, false);
+ if (err)
+ return err;
+
+ kernel_fpu_begin();
+ if (ops == XTS_ENCRYPTION) {
+ err = aeskl_xts_encrypt(&ctx->crypt_ctx.aeskl, walk.src.virt.addr,
+ walk.dst.virt.addr, walk.nbytes, req->iv);
+ } else {
+ err = aeskl_xts_decrypt(&ctx->crypt_ctx.aeskl, walk.src.virt.addr,
+ walk.dst.virt.addr, walk.nbytes, req->iv);
+ }
+ kernel_fpu_end();
+ if (err)
+ return err;
+
+ return skcipher_walk_done(&walk, 0);
+}
+
+/* __always_inline to avoid indirect call in fastpath */
+static __always_inline int xts_crypt(struct skcipher_request *req, enum xts_ops ops)
+{
+ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+ const struct xts_aes_ctx *ctx = xts_aes_ctx(tfm);
+ const unsigned int cryptlen = req->cryptlen;
+ struct scatterlist *src = req->src;
+ struct scatterlist *dst = req->dst;
+ int err;
+
+ if (unlikely(cryptlen < AES_BLOCK_SIZE))
+ return -EINVAL;
+
+ kernel_fpu_begin();
+ err = aeskl_xts_encrypt_iv(&ctx->tweak_ctx.aeskl, req->iv);
+ if (err)
+ goto out;
+
+ /*
+ * In practice, virtually all XTS plaintexts and ciphertexts are either
+ * 512 or 4096 bytes, aligned such that they don't span page boundaries.
+ * To optimize the performance of these cases, and also any other case
+ * where no page boundary is spanned, the below fast-path handles
+ * single-page sources and destinations as efficiently as possible.
+ */
+ if (likely(src->length >= cryptlen && dst->length >= cryptlen &&
+ src->offset + cryptlen <= PAGE_SIZE &&
+ dst->offset + cryptlen <= PAGE_SIZE)) {
+ struct page *src_page = sg_page(src);
+ struct page *dst_page = sg_page(dst);
+ void *src_virt = kmap_local_page(src_page) + src->offset;
+ void *dst_virt = kmap_local_page(dst_page) + dst->offset;
+
+ if (ops == XTS_ENCRYPTION) {
+ err = aeskl_xts_encrypt(&ctx->crypt_ctx.aeskl, src_virt,
+ dst_virt, cryptlen, req->iv);
+ } else {
+ err = aeskl_xts_decrypt(&ctx->crypt_ctx.aeskl, src_virt,
+ dst_virt, cryptlen, req->iv);
+ }
+ if (err)
+ goto out;
+ kunmap_local(dst_virt);
+ kunmap_local(src_virt);
+ kernel_fpu_end();
+ return 0;
+ }
+out:
+ kernel_fpu_end();
+ if (err)
+ return err;
+ return xts_crypt_slowpath(req, ops);
+}
+
+static int xts_setkey_aeskl(struct crypto_skcipher *tfm, const u8 *key, unsigned int keylen)
+{
+ struct xts_aes_ctx *ctx = xts_aes_ctx(tfm);
+ unsigned int aes_keylen;
+ int err;
+
+ err = xts_verify_key(tfm, key, keylen);
+ if (err)
+ return err;
+
+ aes_keylen = keylen / 2;
+ err = aes_check_keylen(aes_keylen);
+ if (err)
+ return err;
+
+ if (unlikely(aes_keylen == AES_KEYSIZE_192)) {
+ pr_warn_once("AES-KL does not support 192-bit key. Use AES-NI.\n");
+ return xts_setkey_aesni(tfm, key, keylen);
+ }
+
+ err = aeskl_setkey(&ctx->crypt_ctx.aeskl, key, aes_keylen);
+ if (err)
+ return err;
+
+ return aeskl_setkey(&ctx->tweak_ctx.aeskl, key + aes_keylen, aes_keylen);
+}
+
+static int xts_encrypt_aeskl(struct skcipher_request *req)
+{
+ if (unlikely(xts_keylen(req) == AES_KEYSIZE_192))
+ return xts_encrypt_aesni(req);
+
+ return xts_crypt(req, XTS_ENCRYPTION);
+}
+
+static int xts_decrypt_aeskl(struct skcipher_request *req)
+{
+ if (unlikely(xts_keylen(req) == AES_KEYSIZE_192))
+ return xts_decrypt_aesni(req);
+
+ return xts_crypt(req, XTS_DECRYPTION);
+}
+
+#define XTS_AES_CTX_SIZE (sizeof(struct xts_aes_ctx) + AES_ALIGN_EXTRA)
+
+/*
+ * The 'cra_priority' value is intentionally set lower than
+ * xts-aes-aesni.
+ */
+static struct skcipher_alg aeskl_skciphers[] = {
+ {
+ .base = {
+ .cra_name = "__xts(aes)",
+ .cra_driver_name = "__xts-aes-aeskl",
+ .cra_priority = 200,
+ .cra_flags = CRYPTO_ALG_INTERNAL,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = XTS_AES_CTX_SIZE,
+ .cra_module = THIS_MODULE,
+ },
+ .min_keysize = 2 * AES_MIN_KEY_SIZE,
+ .max_keysize = 2 * AES_MAX_KEY_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .walksize = 2 * AES_BLOCK_SIZE,
+ .setkey = xts_setkey_aeskl,
+ .encrypt = xts_encrypt_aeskl,
+ .decrypt = xts_decrypt_aeskl,
+ }
+};
+
+static struct simd_skcipher_alg *aeskl_simd_skciphers[ARRAY_SIZE(aeskl_skciphers)];
+
+static int __init aeskl_init(void)
+{
+ u32 eax, ebx, ecx, edx;
+
+ if (!valid_keylocker())
+ return -ENODEV;
+
+ /*
+ * For performance, use the Key Locker AES wide and AVX
+ * instructions.
+ */
+ cpuid_count(KEYLOCKER_CPUID, 0, &eax, &ebx, &ecx, &edx);
+ if (!(ebx & KEYLOCKER_CPUID_EBX_WIDE))
+ return -ENODEV;
+ if (!boot_cpu_has(X86_FEATURE_AVX))
+ return -ENODEV;
+
+ /*
+ * AES-KL itself does not rely on AES-NI. But, AES-KL does not
+ * support 192-bit keys. To ensure AES compliance, AES-KL falls
+ * back to AES-NI.
+ */
+ if (!boot_cpu_has(X86_FEATURE_AES))
+ return -ENODEV;
+
+ return simd_register_skciphers_compat(aeskl_skciphers, ARRAY_SIZE(aeskl_skciphers),
+ aeskl_simd_skciphers);
+}
+
+static void __exit aeskl_exit(void)
+{
+ simd_unregister_skciphers(aeskl_skciphers, ARRAY_SIZE(aeskl_skciphers),
+ aeskl_simd_skciphers);
+}
+
+late_initcall(aeskl_init);
+module_exit(aeskl_exit);
+
+MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm, AES Key Locker implementation");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_CRYPTO("aes");
diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index ef031655b2d3..49fb56efac56 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -35,7 +35,7 @@
#include <linux/workqueue.h>
#include <linux/spinlock.h>
#include <linux/static_call.h>
-
+#include "aesni-xts.h"
#define AESNI_ALIGN 16
#define AESNI_ALIGN_ATTR __attribute__ ((__aligned__(AESNI_ALIGN)))
@@ -864,8 +864,8 @@ static int helper_rfc4106_decrypt(struct aead_request *req)
}
#endif
-static int xts_setkey_aesni(struct crypto_skcipher *tfm, const u8 *key,
- unsigned int keylen)
+int xts_setkey_aesni(struct crypto_skcipher *tfm, const u8 *key,
+ unsigned int keylen)
{
struct aesni_xts_ctx *ctx = aes_xts_ctx(tfm);
int err;
@@ -884,6 +884,7 @@ static int xts_setkey_aesni(struct crypto_skcipher *tfm, const u8 *key,
/* second half of xts-key is for tweak */
return aes_set_key_common(&ctx->tweak_ctx, key + keylen, keylen);
}
+EXPORT_SYMBOL_GPL(xts_setkey_aesni);
typedef void (*xts_encrypt_iv_func)(const struct crypto_aes_ctx *tweak_key,
u8 iv[AES_BLOCK_SIZE]);
@@ -1020,15 +1021,17 @@ static void aesni_xts_decrypt(const struct crypto_aes_ctx *key,
aesni_xts_dec(key, dst, src, len, tweak);
}
-static int xts_encrypt_aesni(struct skcipher_request *req)
+int xts_encrypt_aesni(struct skcipher_request *req)
{
return xts_crypt(req, aesni_xts_encrypt_iv, aesni_xts_encrypt);
}
+EXPORT_SYMBOL_GPL(xts_encrypt_aesni);
-static int xts_decrypt_aesni(struct skcipher_request *req)
+int xts_decrypt_aesni(struct skcipher_request *req)
{
return xts_crypt(req, aesni_xts_encrypt_iv, aesni_xts_decrypt);
}
+EXPORT_SYMBOL_GPL(xts_decrypt_aesni);
static struct crypto_alg aesni_cipher_alg = {
.cra_name = "aes",
diff --git a/arch/x86/crypto/aesni-xts.h b/arch/x86/crypto/aesni-xts.h
new file mode 100644
index 000000000000..9833da2bd9d2
--- /dev/null
+++ b/arch/x86/crypto/aesni-xts.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _AESNI_XTS_H
+#define _AESNI_XTS_H
+
+/*
+ * These AES-NI functions are used by the AES-KL code as a fallback when
+ * a 192-bit key is provided. Key Locker does not support 192-bit keys.
+ */
+
+int xts_setkey_aesni(struct crypto_skcipher *tfm, const u8 *key, unsigned int keylen);
+int xts_encrypt_aesni(struct skcipher_request *req);
+int xts_decrypt_aesni(struct skcipher_request *req);
+
+#endif /* _AESNI_XTS_H */
--
2.34.1
next prev parent reply other threads:[~2024-06-11 21:35 UTC|newest]
Thread overview: 153+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-12 21:12 [PATCH v5 00/12] x86: Support Key Locker Chang S. Bae
2022-01-12 21:12 ` [PATCH v5 01/12] Documentation/x86: Document " Chang S. Bae
2023-06-05 10:52 ` Bagas Sanjaya
2022-01-12 21:12 ` [PATCH v5 02/12] x86/cpufeature: Enumerate Key Locker feature Chang S. Bae
2022-01-12 21:12 ` [PATCH v5 03/12] x86/insn: Add Key Locker instructions to the opcode map Chang S. Bae
2022-01-12 21:12 ` [PATCH v5 04/12] x86/asm: Add a wrapper function for the LOADIWKEY instruction Chang S. Bae
2022-01-12 21:12 ` [PATCH v5 05/12] x86/msr-index: Add MSRs for Key Locker internal wrapping key Chang S. Bae
2022-01-12 21:12 ` [PATCH v5 06/12] x86/keylocker: Define Key Locker CPUID leaf Chang S. Bae
2022-01-12 21:12 ` [PATCH v5 07/12] x86/cpu/keylocker: Load an internal wrapping key at boot-time Chang S. Bae
2022-08-23 15:49 ` Evan Green
2022-08-24 22:20 ` Chang S. Bae
2022-08-24 22:52 ` Evan Green
2022-08-25 1:06 ` Chang S. Bae
2022-08-25 15:31 ` Evan Green
2022-08-31 23:08 ` Chang S. Bae
2022-09-06 16:22 ` Evan Green
2022-09-06 16:46 ` Chang S. Bae
2022-01-12 21:12 ` [PATCH v5 08/12] x86/PM/keylocker: Restore internal wrapping key on resume from ACPI S3/4 Chang S. Bae
2022-01-29 17:31 ` [PATCH v5-fix " Chang S. Bae
2022-01-12 21:12 ` [PATCH v5 09/12] x86/cpu: Add a configuration and command line option for Key Locker Chang S. Bae
2022-01-12 21:12 ` [PATCH v5 10/12] crypto: x86/aes - Prepare for a new AES implementation Chang S. Bae
2022-01-12 21:12 ` [PATCH v5 11/12] crypto: x86/aes-kl - Support AES algorithm using Key Locker instructions Chang S. Bae
2022-01-12 21:12 ` [PATCH v5 12/12] crypto: x86/aes-kl - Support XTS mode Chang S. Bae
2022-01-13 22:16 ` [PATCH v5 00/12] x86: Support Key Locker Dave Hansen
2022-01-13 22:34 ` Bae, Chang Seok
2023-04-10 22:59 ` [PATCH v6 " Chang S. Bae
2023-04-10 22:59 ` [PATCH v6 01/12] Documentation/x86: Document " Chang S. Bae
2023-04-10 22:59 ` [PATCH v6 02/12] x86/cpufeature: Enumerate Key Locker feature Chang S. Bae
2023-04-10 22:59 ` [PATCH v6 03/12] x86/insn: Add Key Locker instructions to the opcode map Chang S. Bae
2023-04-10 22:59 ` [PATCH v6 04/12] x86/asm: Add a wrapper function for the LOADIWKEY instruction Chang S. Bae
2023-04-10 22:59 ` [PATCH v6 05/12] x86/msr-index: Add MSRs for Key Locker internal wrapping key Chang S. Bae
2023-04-10 22:59 ` [PATCH v6 06/12] x86/keylocker: Define Key Locker CPUID leaf Chang S. Bae
2023-04-10 22:59 ` [PATCH v6 07/12] x86/cpu/keylocker: Load an internal wrapping key at boot-time Chang S. Bae
2023-05-05 23:05 ` Eric Biggers
2023-05-08 18:18 ` Chang S. Bae
2023-05-08 21:56 ` Dave Hansen
2023-05-09 0:31 ` Chang S. Bae
2023-05-09 0:51 ` Dave Hansen
2023-05-08 19:18 ` Elliott, Robert (Servers)
2023-05-08 20:15 ` Chang S. Bae
2023-04-10 22:59 ` [PATCH v6 08/12] x86/PM/keylocker: Restore internal wrapping key on resume from ACPI S3/4 Chang S. Bae
2023-05-05 23:09 ` Eric Biggers
2023-05-08 18:18 ` Chang S. Bae
2023-04-10 22:59 ` [PATCH v6 09/12] x86/cpu: Add a configuration and command line option for Key Locker Chang S. Bae
2023-04-10 22:59 ` [PATCH v6 10/12] crypto: x86/aes - Prepare for a new AES implementation Chang S. Bae
2023-05-05 23:27 ` Eric Biggers
2023-05-09 0:55 ` Chang S. Bae
2023-05-11 19:05 ` Chang S. Bae
2023-05-11 21:39 ` Eric Biggers
2023-05-11 23:19 ` Chang S. Bae
2023-04-10 22:59 ` [PATCH v6 11/12] crypto: x86/aes-kl - Support AES algorithm using Key Locker instructions Chang S. Bae
2023-05-06 0:01 ` Eric Biggers
2023-05-08 18:18 ` Chang S. Bae
2023-05-24 17:18 ` Chang S. Bae
2023-05-12 17:52 ` Milan Broz
2023-05-08 19:21 ` Elliott, Robert (Servers)
2023-05-08 19:24 ` Elliott, Robert (Servers)
2023-05-08 20:00 ` Chang S. Bae
2023-04-10 22:59 ` [PATCH v6 12/12] crypto: x86/aes-kl - Support XTS mode Chang S. Bae
2023-05-24 16:57 ` [PATCH v7 00/12] x86: Support Key Locker Chang S. Bae
2023-05-24 16:57 ` [PATCH v7 01/12] Documentation/x86: Document " Chang S. Bae
2023-05-24 16:57 ` [PATCH v7 02/12] x86/cpufeature: Enumerate Key Locker feature Chang S. Bae
2023-05-24 16:57 ` [PATCH v7 03/12] x86/insn: Add Key Locker instructions to the opcode map Chang S. Bae
2023-05-24 16:57 ` [PATCH v7 04/12] x86/asm: Add a wrapper function for the LOADIWKEY instruction Chang S. Bae
2023-05-24 16:57 ` [PATCH v7 05/12] x86/msr-index: Add MSRs for Key Locker wrapping key Chang S. Bae
2023-05-24 16:57 ` [PATCH v7 06/12] x86/keylocker: Define Key Locker CPUID leaf Chang S. Bae
2023-05-24 16:57 ` [PATCH v7 07/12] x86/cpu/keylocker: Load a wrapping key at boot-time Chang S. Bae
2023-05-24 16:57 ` [PATCH v7 08/12] x86/PM/keylocker: Restore the wrapping key on the resume from ACPI S3/4 Chang S. Bae
2023-05-24 16:57 ` [PATCH v7 09/12] x86/cpu: Add a configuration and command line option for Key Locker Chang S. Bae
2023-05-24 16:57 ` [PATCH v7 10/12] crypto: x86/aesni - Use the proper data type in struct aesni_xts_ctx Chang S. Bae
2023-05-26 6:54 ` Eric Biggers
2023-05-30 20:50 ` Chang S. Bae
2023-05-24 16:57 ` [PATCH v7 11/12] crypto: x86/aes - Prepare for a new AES implementation Chang S. Bae
2023-05-24 16:57 ` [PATCH v7 12/12] crypto: x86/aes-kl - Implement the AES-XTS algorithm Chang S. Bae
2023-05-26 7:23 ` Eric Biggers
2023-05-30 20:49 ` Chang S. Bae
2023-06-03 15:22 ` [PATCH v8 00/12] x86: Support Key Locker Chang S. Bae
2023-06-03 15:22 ` [PATCH v8 01/12] Documentation/x86: Document " Chang S. Bae
2023-06-05 10:54 ` Bagas Sanjaya
2023-06-06 2:17 ` Randy Dunlap
2023-06-06 4:18 ` Chang S. Bae
2023-06-03 15:22 ` [PATCH v8 02/12] x86/cpufeature: Enumerate Key Locker feature Chang S. Bae
2023-06-03 15:22 ` [PATCH v8 03/12] x86/insn: Add Key Locker instructions to the opcode map Chang S. Bae
2023-06-03 15:22 ` [PATCH v8 04/12] x86/asm: Add a wrapper function for the LOADIWKEY instruction Chang S. Bae
2023-06-03 15:22 ` [PATCH v8 05/12] x86/msr-index: Add MSRs for Key Locker wrapping key Chang S. Bae
2023-06-03 15:22 ` [PATCH v8 06/12] x86/keylocker: Define Key Locker CPUID leaf Chang S. Bae
2023-06-03 15:22 ` [PATCH v8 07/12] x86/cpu/keylocker: Load a wrapping key at boot-time Chang S. Bae
2023-06-03 15:22 ` [PATCH v8 08/12] x86/PM/keylocker: Restore the wrapping key on the resume from ACPI S3/4 Chang S. Bae
2023-06-03 15:22 ` [PATCH v8 09/12] x86/cpu: Add a configuration and command line option for Key Locker Chang S. Bae
2023-06-03 16:37 ` Borislav Petkov
2023-06-04 22:13 ` Chang S. Bae
2023-06-03 15:22 ` [PATCH v8 10/12] crypto: x86/aesni - Use the proper data type in struct aesni_xts_ctx Chang S. Bae
2023-06-04 15:34 ` Eric Biggers
2023-06-04 22:02 ` Chang S. Bae
2023-06-05 2:46 ` Eric Biggers
2023-06-05 4:41 ` Chang S. Bae
2023-06-21 12:06 ` [PATCH] crypto: x86/aesni: Align the address before aes_set_key_common() Chang S. Bae
2023-07-14 8:51 ` Herbert Xu
2023-06-03 15:22 ` [PATCH v8 11/12] crypto: x86/aes - Prepare for a new AES-XTS implementation Chang S. Bae
2023-06-03 15:22 ` [PATCH v8 12/12] crypto: x86/aes-kl - Implement the AES-XTS algorithm Chang S. Bae
2023-06-07 5:35 ` Eric Biggers
2023-06-07 22:06 ` Chang S. Bae
2024-03-11 21:32 ` [PATCH] crypto: x86/aesni - Update aesni_set_key() to return void Chang S. Bae
2024-03-12 2:15 ` Eric Biggers
2024-03-12 7:46 ` Ard Biesheuvel
2024-03-12 15:03 ` Chang S. Bae
2024-03-12 15:18 ` Ard Biesheuvel
2024-03-12 15:37 ` Chang S. Bae
2024-03-22 23:04 ` [PATCH v2 0/2] crypto: x86/aesni - Simplify AES key expansion code Chang S. Bae
2024-03-22 23:04 ` [PATCH v2 1/2] crypto: x86/aesni - Rearrange AES key size check Chang S. Bae
2024-03-22 23:04 ` [PATCH v2 2/2] crypto: x86/aesni - Update aesni_set_key() to return void Chang S. Bae
2024-03-28 10:57 ` [PATCH v2 0/2] crypto: x86/aesni - Simplify AES key expansion code Herbert Xu
2024-03-29 1:53 ` [PATCH v9 00/14] x86: Support Key Locker Chang S. Bae
2024-03-29 1:53 ` [PATCH v9 01/14] Documentation/x86: Document " Chang S. Bae
2024-03-31 15:48 ` Randy Dunlap
2024-03-29 1:53 ` [PATCH v9 02/14] x86/cpufeature: Enumerate Key Locker feature Chang S. Bae
2024-03-29 1:53 ` [PATCH v9 03/14] x86/insn: Add Key Locker instructions to the opcode map Chang S. Bae
2024-03-29 1:53 ` [PATCH v9 04/14] x86/asm: Add a wrapper function for the LOADIWKEY instruction Chang S. Bae
2024-03-29 1:53 ` [PATCH v9 05/14] x86/msr-index: Add MSRs for Key Locker wrapping key Chang S. Bae
2024-03-29 1:53 ` [PATCH v9 06/14] x86/keylocker: Define Key Locker CPUID leaf Chang S. Bae
2024-03-29 1:53 ` [PATCH v9 07/14] x86/cpu/keylocker: Load a wrapping key at boot time Chang S. Bae
2024-04-07 23:04 ` [PATCH v9a " Chang S. Bae
2024-03-29 1:53 ` [PATCH v9 08/14] x86/PM/keylocker: Restore the wrapping key on the resume from ACPI S3/4 Chang S. Bae
2024-05-22 18:48 ` [PATCH v9a " Chang S. Bae
2024-03-29 1:53 ` [PATCH v9 09/14] x86/hotplug/keylocker: Ensure wrapping key backup capability Chang S. Bae
2024-03-29 1:53 ` [PATCH v9 10/14] x86/cpu/keylocker: Check Gather Data Sampling mitigation Chang S. Bae
2024-03-29 6:57 ` Pawan Gupta
2024-04-07 23:04 ` [PATCH v9a " Chang S. Bae
2024-04-19 0:01 ` Pawan Gupta
2024-04-22 7:49 ` Chang S. Bae
2024-04-19 17:47 ` [PATCH 15/14] x86/gds: Lock GDS mitigation when keylocker feature is present Pawan Gupta
2024-04-19 18:03 ` Daniel Sneddon
2024-04-19 20:19 ` Pawan Gupta
2024-04-19 20:33 ` Daniel Sneddon
2024-04-22 7:35 ` Chang S. Bae
2024-04-22 21:32 ` Pawan Gupta
2024-04-22 22:13 ` Chang S. Bae
2024-03-29 1:53 ` [PATCH v9 11/14] x86/cpu/keylocker: Check Register File Data Sampling mitigation Chang S. Bae
2024-03-29 6:20 ` Pawan Gupta
2024-04-07 23:04 ` [PATCH v9a " Chang S. Bae
2024-03-29 1:53 ` [PATCH v9 12/14] x86/Kconfig: Add a configuration for Key Locker Chang S. Bae
2024-06-11 21:36 ` [PATCH v9b 12/14] x86/Kconfig: Add symbols " Chang S. Bae
2024-03-29 1:53 ` [PATCH v9 13/14] crypto: x86/aes - Prepare for new AES-XTS implementation Chang S. Bae
2024-06-11 21:41 ` Chang S. Bae
2024-03-29 1:53 ` [PATCH v9 14/14] crypto: x86/aes-kl - Implement the AES-XTS algorithm Chang S. Bae
2024-05-22 18:42 ` [PATCH v9a " Chang S. Bae
2024-05-31 5:37 ` Eric Biggers
2024-06-11 21:35 ` Chang S. Bae [this message]
2024-04-07 23:24 ` [PATCH v9 00/14] x86: Support Key Locker Chang S. Bae
2024-04-08 1:48 ` Eric Biggers
2024-04-15 22:16 ` Chang S. Bae
2024-04-15 22:54 ` Eric Biggers
2024-04-15 22:58 ` Chang S. Bae
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240611213548.253079-1-chang.seok.bae@intel.com \
--to=chang.seok.bae@intel.com \
--cc=bernie.keany@intel.com \
--cc=ebiggers@kernel.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome