From: Thomas Richard <thomas.richard@bootlin.com>
To: Peter Rosin <peda@axentia.se>
Cc: linux-kernel@vger.kernel.org, gregory.clement@bootlin.com,
theo.lebrun@bootlin.com, thomas.petazzoni@bootlin.com,
u-kumar1@ti.com, Thomas Richard <thomas.richard@bootlin.com>
Subject: [PATCH v2] mux: mmio: Add suspend and resume support
Date: Wed, 11 Sep 2024 10:53:05 +0200 [thread overview]
Message-ID: <20240613-mux-mmio-resume-support-v2-1-e8496099b034@bootlin.com> (raw)
The status of each mux is read during suspend and stored in the private
memory of the mux_chip.
Then the state is restored during the resume.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
---
In this second version, as discussed with Peter, everything is done in the
mmio-mux driver.
A mux_mmio_set() function was added, and used during suspend stage to get
the status of the of the muxes.
This status is stored in the private memory of the mux_chip.
---
Changes in v2:
- Remove all modifications done in the mux subsystem
- Add a mux_mmio_set()
- Read the status of muxes during suspend and store in the private memory
of the mux_chip.
- Use this status to restore muxes during resume.
- Link to v1: https://lore.kernel.org/r/20240613-mux-mmio-resume-support-v1-0-4525bf56024a@bootlin.com
---
drivers/mux/mmio.c | 82 ++++++++++++++++++++++++++++++++++++++++++++++++------
1 file changed, 73 insertions(+), 9 deletions(-)
diff --git a/drivers/mux/mmio.c b/drivers/mux/mmio.c
index 30a952c34365..30b84382637f 100644
--- a/drivers/mux/mmio.c
+++ b/drivers/mux/mmio.c
@@ -15,11 +15,25 @@
#include <linux/property.h>
#include <linux/regmap.h>
+struct mux_mmio {
+ struct regmap_field **fields;
+ unsigned int *hardware_states;
+};
+
+static int mux_mmio_get(struct mux_control *mux, int *state)
+{
+ struct mux_mmio *mux_mmio = mux_chip_priv(mux->chip);
+ unsigned int index = mux_control_get_index(mux);
+
+ return regmap_field_read(mux_mmio->fields[index], state);
+}
+
static int mux_mmio_set(struct mux_control *mux, int state)
{
- struct regmap_field **fields = mux_chip_priv(mux->chip);
+ struct mux_mmio *mux_mmio = mux_chip_priv(mux->chip);
+ unsigned int index = mux_control_get_index(mux);
- return regmap_field_write(fields[mux_control_get_index(mux)], state);
+ return regmap_field_write(mux_mmio->fields[index], state);
}
static const struct mux_control_ops mux_mmio_ops = {
@@ -37,8 +51,8 @@ static int mux_mmio_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
- struct regmap_field **fields;
struct mux_chip *mux_chip;
+ struct mux_mmio *mux_mmio;
struct regmap *regmap;
int num_fields;
int ret;
@@ -69,12 +83,20 @@ static int mux_mmio_probe(struct platform_device *pdev)
}
num_fields = ret / 2;
- mux_chip = devm_mux_chip_alloc(dev, num_fields, num_fields *
- sizeof(*fields));
+ mux_chip = devm_mux_chip_alloc(dev, num_fields, sizeof(struct mux_mmio));
if (IS_ERR(mux_chip))
return PTR_ERR(mux_chip);
- fields = mux_chip_priv(mux_chip);
+ mux_mmio = mux_chip_priv(mux_chip);
+
+ mux_mmio->fields = devm_kmalloc(dev, num_fields * sizeof(*mux_mmio->fields), GFP_KERNEL);
+ if (IS_ERR(mux_mmio->fields))
+ return PTR_ERR(mux_mmio->fields);
+
+ mux_mmio->hardware_states = devm_kmalloc(dev, num_fields *
+ sizeof(*mux_mmio->hardware_states), GFP_KERNEL);
+ if (IS_ERR(mux_mmio->hardware_states))
+ return PTR_ERR(mux_mmio->hardware_states);
for (i = 0; i < num_fields; i++) {
struct mux_control *mux = &mux_chip->mux[i];
@@ -104,9 +126,9 @@ static int mux_mmio_probe(struct platform_device *pdev)
return -EINVAL;
}
- fields[i] = devm_regmap_field_alloc(dev, regmap, field);
- if (IS_ERR(fields[i])) {
- ret = PTR_ERR(fields[i]);
+ mux_mmio->fields[i] = devm_regmap_field_alloc(dev, regmap, field);
+ if (IS_ERR(mux_mmio->fields[i])) {
+ ret = PTR_ERR(mux_mmio->fields[i]);
dev_err(dev, "bitfield %d: failed allocate: %d\n",
i, ret);
return ret;
@@ -130,13 +152,55 @@ static int mux_mmio_probe(struct platform_device *pdev)
mux_chip->ops = &mux_mmio_ops;
+ dev_set_drvdata(dev, mux_chip);
+
return devm_mux_chip_register(dev, mux_chip);
}
+static int mux_mmio_suspend_noirq(struct device *dev)
+{
+ struct mux_chip *mux_chip = dev_get_drvdata(dev);
+ struct mux_mmio *mux_mmio = mux_chip_priv(mux_chip);
+ unsigned int state;
+ int ret, i;
+
+ for (i = 0; i < mux_chip->controllers; i++) {
+ ret = mux_mmio_get(&mux_chip->mux[i], &state);
+ if (ret) {
+ dev_err(dev, "control %u: error saving mux: %d\n", i, ret);
+ return ret;
+ }
+
+ mux_mmio->hardware_states[i] = state;
+ }
+
+ return 0;
+}
+
+static int mux_mmio_resume_noirq(struct device *dev)
+{
+ struct mux_chip *mux_chip = dev_get_drvdata(dev);
+ struct mux_mmio *mux_mmio = mux_chip_priv(mux_chip);
+ int ret, i;
+
+ for (i = 0; i < mux_chip->controllers; i++) {
+ ret = mux_mmio_set(&mux_chip->mux[i], mux_mmio->hardware_states[i]);
+ if (ret) {
+ dev_err(dev, "control %u: error restoring mux: %d\n", i, ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static DEFINE_NOIRQ_DEV_PM_OPS(mux_mmio_pm_ops, mux_mmio_suspend_noirq, mux_mmio_resume_noirq);
+
static struct platform_driver mux_mmio_driver = {
.driver = {
.name = "mmio-mux",
.of_match_table = mux_mmio_dt_ids,
+ .pm = pm_sleep_ptr(&mux_mmio_pm_ops),
},
.probe = mux_mmio_probe,
};
---
base-commit: caf614bf68351c7e9e38dd37e07539417c757813
change-id: 20240613-mux-mmio-resume-support-4f3b2a34a32a
Best regards,
--
Thomas Richard <thomas.richard@bootlin.com>
next reply other threads:[~2024-09-11 8:53 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-11 8:53 Thomas Richard [this message]
2024-10-16 13:41 ` Thomas Richard
2024-12-04 10:22 ` Thomas Richard
2024-12-04 13:53 ` Andrew Davis
2024-12-04 14:14 ` Thomas Richard
2024-12-04 14:52 ` Andrew Davis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240613-mux-mmio-resume-support-v2-1-e8496099b034@bootlin.com \
--to=thomas.richard@bootlin.com \
--cc=gregory.clement@bootlin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peda@axentia.se \
--cc=theo.lebrun@bootlin.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=u-kumar1@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®