[PATCH v3 06/38] x86/resctrl: Move data_width to be a schema property

[James Morse <james.morse@arm.com>]

The resctrl architecture code gets to specify the width of the schema
entries that are used by resctrl. These are determined by the schema
format, e.g. percentage or bitmap.

Move this property into struct resctrl_schema and get the filesystem
parts of resctrl to set it based on the schema format.

This allows rdt_init_padding() to be removed, its work can be done
by schemata_list_add(), allowing max_name_width and max_data_width
to be moved out of core.c which has no counterpart after the
move to fs.

The logic for calculating max_name_width was moved in earlier patches,
but the definition was not moved.

Signed-off-by: James Morse <james.morse@arm.com>
---
Changes since v2:
 * This patch is new.
---
 arch/x86/kernel/cpu/resctrl/core.c     | 26 --------------------------
 arch/x86/kernel/cpu/resctrl/rdtgroup.c | 11 +++++++++++
 include/linux/resctrl.h                |  4 ++--
 3 files changed, 13 insertions(+), 28 deletions(-)

diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index 4a5216a13b46..4de7d20aa5aa 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -44,12 +44,6 @@ static DEFINE_MUTEX(domain_list_lock);
  */
 DEFINE_PER_CPU(struct resctrl_pqr_state, pqr_state);
 
-/*
- * Used to store the max resource name width and max resource data width
- * to display the schemata in a tabular format
- */
-int max_name_width, max_data_width;
-
 /*
  * Global boolean for rdt_alloc which is true if any
  * resource allocation is enabled.
@@ -222,7 +216,6 @@ static bool __get_mem_config_intel(struct rdt_resource *r)
 			return false;
 		r->membw.arch_needs_linear = false;
 	}
-	r->data_width = 3;
 
 	if (boot_cpu_has(X86_FEATURE_PER_THREAD_MBA))
 		r->membw.throttle_mode = THREAD_THROTTLE_PER_THREAD;
@@ -262,8 +255,6 @@ static bool __rdt_get_mem_config_amd(struct rdt_resource *r)
 	r->membw.throttle_mode = THREAD_THROTTLE_UNDEFINED;
 	r->membw.min_bw = 0;
 	r->membw.bw_gran = 1;
-	/* Max value is 2048, Data width should be 4 in decimal */
-	r->data_width = 4;
 
 	r->alloc_capable = true;
 
@@ -283,7 +274,6 @@ static void rdt_get_cache_alloc_cfg(int idx, struct rdt_resource *r)
 	r->cache.cbm_len = eax.split.cbm_len + 1;
 	r->default_ctrl = BIT_MASK(eax.split.cbm_len + 1) - 1;
 	r->cache.shareable_bits = ebx & r->default_ctrl;
-	r->data_width = (r->cache.cbm_len + 3) / 4;
 	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
 		r->cache.arch_has_sparse_bitmasks = ecx.split.noncont;
 	r->alloc_capable = true;
@@ -631,20 +621,6 @@ static int resctrl_arch_offline_cpu(unsigned int cpu)
 	return 0;
 }
 
-/*
- * Choose a width for the resource name and resource data based on the
- * resource that has widest name and cbm.
- */
-static __init void rdt_init_padding(void)
-{
-	struct rdt_resource *r;
-
-	for_each_alloc_capable_rdt_resource(r) {
-		if (r->data_width > max_data_width)
-			max_data_width = r->data_width;
-	}
-}
-
 enum {
 	RDT_FLAG_CMT,
 	RDT_FLAG_MBM_TOTAL,
@@ -942,8 +918,6 @@ static int __init resctrl_late_init(void)
 	if (!get_rdt_resources())
 		return -ENODEV;
 
-	rdt_init_padding();
-
 	state = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
 				  "x86/resctrl/cat:online:",
 				  resctrl_arch_online_cpu,
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index af9968328771..4f8e20cc06eb 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -58,6 +58,12 @@ static struct kernfs_node *kn_mongrp;
 /* Kernel fs node for "mon_data" directory under root */
 static struct kernfs_node *kn_mondata;
 
+/*
+ * Used to store the max resource name width and max resource data width
+ * to display the schemata in a tabular format
+ */
+int max_name_width, max_data_width;
+
 static struct seq_buf last_cmd_status;
 static char last_cmd_status_buf[512];
 
@@ -2600,15 +2606,20 @@ static int schemata_list_add(struct rdt_resource *r, enum resctrl_conf_type type
 	switch (r->schema_fmt) {
 	case RESCTRL_SCHEMA_BITMAP:
 		s->fmt_str = "%d=%0*x";
+		s->data_width = (r->cache.cbm_len + 3) / 4;
 		break;
 	case RESCTRL_SCHEMA_PERCENTAGE:
 		s->fmt_str = "%d=%0*u";
+		s->data_width = 3;
 		break;
 	case RESCTRL_SCHEMA_MBPS:
 		s->fmt_str = "%d=%0*u";
+		s->data_width = 4;
 		break;
 	}
 
+	max_data_width = max(max_data_width, s->data_width);
+
 	INIT_LIST_HEAD(&s->list);
 	list_add(&s->list, &resctrl_schema_all);
 
diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
index abecbd92ac93..ddcd938972d2 100644
--- a/include/linux/resctrl.h
+++ b/include/linux/resctrl.h
@@ -182,7 +182,6 @@ enum resctrl_schema_fmt {
  * @membw:		If the component has bandwidth controls, their properties.
  * @domains:		RCU list of all domains for this resource
  * @name:		Name to use in "schemata" file.
- * @data_width:		Character width of data when displaying
  * @default_ctrl:	Specifies default cache cbm or memory B/W percent.
  * @schema_fmt:	Which format string and parser is used for this schema.
  * @evt_list:		List of monitoring events
@@ -198,7 +197,6 @@ struct rdt_resource {
 	struct resctrl_membw	membw;
 	struct list_head	domains;
 	char			*name;
-	int			data_width;
 	u32			default_ctrl;
 	enum resctrl_schema_fmt	schema_fmt;
 	struct list_head	evt_list;
@@ -218,6 +216,7 @@ struct rdt_resource *resctrl_arch_get_resource(enum resctrl_res_level l);
  * @list:	Member of resctrl_schema_all.
  * @name:	The name to use in the "schemata" file.
  * @fmt_str:	Format string to show domain value
+ * @data_width:	Character width of data when displaying
  * @conf_type:	Whether this schema is specific to code/data.
  * @res:	The resource structure exported by the architecture to describe
  *		the hardware that is configured by this schema.
@@ -229,6 +228,7 @@ struct resctrl_schema {
 	struct list_head		list;
 	char				name[8];
 	const char			*fmt_str;
+	int				data_width;
 	enum resctrl_conf_type		conf_type;
 	struct rdt_resource		*res;
 	u32				num_closid;
-- 
2.39.2