From: Siddharth Vadapalli <s-vadapalli@ti.com>
To: <nm@ti.com>, <vigneshr@ti.com>, <afd@ti.com>, <kristo@kernel.org>,
<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
<rogerq@kernel.org>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <u-kumar1@ti.com>,
<danishanwar@ti.com>, <srk@ti.com>, <s-vadapalli@ti.com>
Subject: [PATCH v7 8/8] arm64: dts: ti: k3-am62p-j722s: Move SoC-specific node properties
Date: Sat, 15 Jun 2024 13:46:00 +0530 [thread overview]
Message-ID: <20240615081600.3602462-9-s-vadapalli@ti.com> (raw)
In-Reply-To: <20240615081600.3602462-1-s-vadapalli@ti.com>
Certain device-tree node properties of shared device-tree nodes are
different between the AM62P and J722S SoCs. To avoid overriding the
properties and to avoid redefining the nodes in the k3-{soc}-main.dtsi
having such SoC specific properties, move the properties to the SoC
specific k3-{soc}-main.dtsi files.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---
This patch has been introduced in this series and hence doesn't have a
Changelog. This patch replaces the v6 patch:
arm64: dts: ti: k3-j722s: Move MAIN domain overrides to k3-j722s-main.dtsi
based on Roger's suggestion at:
https://lore.kernel.org/r/d4c33ee4-1e91-40e5-90c8-bd793bcf34ff@kernel.org/
.../dts/ti/k3-am62p-j722s-common-main.dtsi | 5 -----
arch/arm64/boot/dts/ti/k3-am62p-main.dtsi | 17 +++++++++++++++++
arch/arm64/boot/dts/ti/k3-j722s-main.dtsi | 17 +++++++++++++++++
arch/arm64/boot/dts/ti/k3-j722s.dtsi | 19 -------------------
4 files changed, 34 insertions(+), 24 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
index 870c95081ef5..e787f9386eb5 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
@@ -8,10 +8,8 @@
&cbass_main {
oc_sram: sram@70000000 {
compatible = "mmio-sram";
- reg = <0x00 0x70000000 0x00 0x10000>;
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x00 0x00 0x70000000 0x10000>;
};
gic500: interrupt-controller@1800000 {
@@ -92,7 +90,6 @@ inta_main_dmss: interrupt-controller@48000000 {
msi-controller;
ti,sci = <&dmsc>;
ti,sci-dev-id = <28>;
- ti,interrupt-ranges = <5 69 35>;
ti,unmapped-event-sources = <&main_bcdma>, <&main_pktdma>;
};
@@ -539,7 +536,6 @@ main_gpio0: gpio@600000 {
<193>, <194>, <195>;
interrupt-controller;
#interrupt-cells = <2>;
- ti,ngpio = <92>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 77 0>;
@@ -556,7 +552,6 @@ main_gpio1: gpio@601000 {
<183>, <184>, <185>;
interrupt-controller;
#interrupt-cells = <2>;
- ti,ngpio = <52>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 78 0>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
index 9caab7db5440..f8a7f0cbd327 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
@@ -32,3 +32,20 @@ usb1: usb@31100000 {
};
};
};
+
+&oc_sram {
+ reg = <0x00 0x70000000 0x00 0x10000>;
+ ranges = <0x00 0x00 0x70000000 0x10000>;
+};
+
+&inta_main_dmss {
+ ti,interrupt-ranges = <5 69 35>;
+};
+
+&main_gpio0 {
+ ti,ngpio = <92>;
+};
+
+&main_gpio1 {
+ ti,ngpio = <52>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
index b16f3a7cb109..228c6c89245c 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
@@ -171,3 +171,20 @@ pcie0_ctrl: pcie0-ctrl@4070 {
reg = <0x4070 0x4>;
};
};
+
+&oc_sram {
+ reg = <0x00 0x70000000 0x00 0x40000>;
+ ranges = <0x00 0x00 0x70000000 0x40000>;
+};
+
+&inta_main_dmss {
+ ti,interrupt-ranges = <7 71 21>;
+};
+
+&main_gpio0 {
+ ti,ngpio = <87>;
+};
+
+&main_gpio1 {
+ ti,ngpio = <73>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j722s.dtsi b/arch/arm64/boot/dts/ti/k3-j722s.dtsi
index 705b99e35f05..14c6c6a332ef 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j722s.dtsi
@@ -232,22 +232,3 @@ cbass_wakeup: bus@b00000 {
/* Include J722S specific peripherals */
#include "k3-j722s-main.dtsi"
-
-/* Main domain overrides */
-
-&inta_main_dmss {
- ti,interrupt-ranges = <7 71 21>;
-};
-
-&main_gpio0 {
- ti,ngpio = <87>;
-};
-
-&main_gpio1 {
- ti,ngpio = <73>;
-};
-
-&oc_sram {
- reg = <0x00 0x70000000 0x00 0x40000>;
- ranges = <0x00 0x00 0x70000000 0x40000>;
-};
--
2.40.1
next prev parent reply other threads:[~2024-06-15 8:17 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-15 8:15 [PATCH v7 0/8] Add PCIe, SERDES and USB DT support for J722S Siddharth Vadapalli
2024-06-15 8:15 ` [PATCH v7 1/8] arm64: dts: ti: am62p: Rename am62p-{}.dtsi to am62p-j722s-common-{}.dtsi Siddharth Vadapalli
2024-06-15 8:15 ` [PATCH v7 2/8] arm64: dts: ti: k3-am62p-j722s: Move AM62P specific USB1 to am62p-main.dtsi Siddharth Vadapalli
2024-06-15 8:15 ` [PATCH v7 3/8] arm64: dts: ti: k3-j722s: Add main domain peripherals specific to J722S Siddharth Vadapalli
2024-06-15 8:15 ` [PATCH v7 4/8] arm64: dts: ti: k3-j722s: Switch to k3-am62p-j722s-common-{}.dtsi includes Siddharth Vadapalli
2024-06-15 8:15 ` [PATCH v7 5/8] arm64: dts: ti: k3-serdes: Add SERDES0/SERDES1 lane-muxing macros for J722S Siddharth Vadapalli
2024-06-15 8:15 ` [PATCH v7 6/8] arm64: dts: ti: k3-j722s-main: Add SERDES and PCIe support Siddharth Vadapalli
2024-06-15 8:15 ` [PATCH v7 7/8] arm64: dts: ti: k3-j722s: Enable PCIe and USB support on J722S-EVM Siddharth Vadapalli
2024-06-15 8:16 ` Siddharth Vadapalli [this message]
2024-06-17 12:51 ` [PATCH v7 8/8] arm64: dts: ti: k3-am62p-j722s: Move SoC-specific node properties Roger Quadros
2024-06-21 15:15 ` [PATCH v7 0/8] Add PCIe, SERDES and USB DT support for J722S Vignesh Raghavendra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240615081600.3602462-9-s-vadapalli@ti.com \
--to=s-vadapalli@ti.com \
--cc=afd@ti.com \
--cc=conor+dt@kernel.org \
--cc=danishanwar@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh@kernel.org \
--cc=rogerq@kernel.org \
--cc=srk@ti.com \
--cc=u-kumar1@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®