mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Armin Wolf <W_Armin@gmx.de>
To: hdegoede@redhat.com, ilpo.jarvinen@linux.intel.com
Cc: corbet@lwn.net, platform-driver-x86@vger.kernel.org,
	linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] platform/x86: wmi: Add bus ABI documentation
Date: Thu, 20 Jun 2024 21:42:14 +0200	[thread overview]
Message-ID: <20240620194214.3071-3-W_Armin@gmx.de> (raw)
In-Reply-To: <20240620194214.3071-1-W_Armin@gmx.de>

Add documentation for the WMI bus sysfs interface so userspace
applications can use it to access additional data about WMI devices.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
---
 Documentation/ABI/testing/sysfs-bus-wmi | 79 +++++++++++++++++++++++++
 MAINTAINERS                             |  1 +
 2 files changed, 80 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-wmi

diff --git a/Documentation/ABI/testing/sysfs-bus-wmi b/Documentation/ABI/testing/sysfs-bus-wmi
new file mode 100644
index 000000000000..496d602b67c6
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-wmi
@@ -0,0 +1,79 @@
+What:		/sys/bus/wmi/devices/.../driver_override
+Date:		February 2024
+Contact:	Armin Wolf <W_Armin@gmx.de>
+Description:
+		This file allows the driver for a device to be specified which
+		will override standard ID table matching.
+		When specified, only a driver with a name matching the value
+		written to driver_override will have an opportunity to bind
+		to the device. The override is specified by writing a string
+		to the driver_override file (echo wmi-event-dummy > \
+		driver_override) and may be cleared with an empty string
+		(echo > driver_override). This returns the device to standard
+		matching rules binding. Writing to driver_override does not
+		automatically unbind the device from its current driver or make
+		any attempt to automatically load the specified driver. If no
+		driver with a matching name is currently loaded in the kernel,
+		the device will not bind to any driver. This also allows
+		devices to opt-out of driver binding using a driver_override
+		name such as "none". Only a single driver may be specified in
+		the override, there is no support for parsing delimiters.
+
+What:		/sys/bus/wmi/devices/.../modalias
+Date:		November 2015
+Contact:	Andy Lutomirski <luto@kernel.org>
+Description:
+		This file contains the MODALIAS value emitted by uevent for a
+		given WMI device.
+
+		Format: wmi:XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX.
+
+What:		/sys/bus/wmi/devices/.../guid
+Date:		November 2015
+Contact:	Andy Lutomirski <luto@kernel.org>
+Description:
+		This file contains the GUID used to match WMI devices to
+		compatible WMI drivers. This GUID is not necessarily unique
+		inside a given machine, it is solely used to identify the
+		interface exposed by a given WMI device.
+
+What:		/sys/bus/wmi/devices/.../object_id
+Date:		November 2015
+Contact:	Andy Lutomirski <luto@kernel.org>
+Description:
+		This file contains the WMI object ID used internally to construct
+		the ACPI method names used by non-event WMI devices. It contains
+		two ASCII letters.
+
+What:		/sys/bus/wmi/devices/.../notify_id
+Date:		November 2015
+Contact:	Andy Lutomirski <luto@kernel.org>
+Description:
+		This file contains the WMI notify ID used internally to map ACPI
+		events to WMI event devices. It contains two ASCII letters.
+
+What:		/sys/bus/wmi/devices/.../instance_count
+Date:		November 2015
+Contact:	Andy Lutomirski <luto@kernel.org>
+Description:
+		This file contains the number of WMI object instances being
+		present on a given WMI device. It contains a non-negative
+		number.
+
+What:		/sys/bus/wmi/devices/.../expensive
+Date:		November 2015
+Contact:	Andy Lutomirski <luto@kernel.org>
+Description:
+		This file contains a boolean flag signaling if interacting with
+		the given WMI device will consume significant CPU resources.
+		The WMI driver core will take care of enabling/disabling such
+		WMI devices.
+
+What:		/sys/bus/wmi/devices/.../setable
+Date:		May 2017
+Contact:	Darren Hart (VMware) <dvhart@infradead.org>
+Description:
+		This file contains a boolean flags signaling the data block
+		aassociated with the given WMI device is writable. If the
+		given WMI device is not associated with a data block, then
+		this file will not exist.
diff --git a/MAINTAINERS b/MAINTAINERS
index 09ff0dfd65cb..4f76d6a5d348 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -392,6 +392,7 @@ ACPI WMI DRIVER
 M:	Armin Wolf <W_Armin@gmx.de>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
+F:	Documentation/ABI/testing/sysfs-bus-wmi
 F:	Documentation/driver-api/wmi.rst
 F:	Documentation/wmi/
 F:	drivers/platform/x86/wmi.c
--
2.39.2


  parent reply	other threads:[~2024-06-20 19:42 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-06-20 19:42 [PATCH 0/2] platform/x86: wmi: Add driver_override support Armin Wolf
2024-06-20 19:42 ` [PATCH 1/2] " Armin Wolf
2024-06-20 19:42 ` Armin Wolf [this message]
2024-06-24 14:07   ` [PATCH 2/2] platform/x86: wmi: Add bus ABI documentation Ilpo Järvinen
2024-06-24 11:48 ` [PATCH 0/2] platform/x86: wmi: Add driver_override support Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240620194214.3071-3-W_Armin@gmx.de \
    --to=w_armin@gmx.de \
    --cc=corbet@lwn.net \
    --cc=hdegoede@redhat.com \
    --cc=ilpo.jarvinen@linux.intel.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®