From: Nathan Morrisson <nmorrisson@phytec.com>
To: nm@ti.com, vigneshr@ti.com, kristo@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, upstream@lists.phytec.de,
w.egorov@phytec.de
Subject: [PATCH] arm64: dts: ti: k3-am6xx-phycore-qspi-nor: Add overlay to enable QSPI NOR
Date: Fri, 21 Jun 2024 16:31:43 -0700 [thread overview]
Message-ID: <20240621233143.2077941-1-nmorrisson@phytec.com> (raw)
Add an overlay to change from the default OSPI NOR to QSPI NOR
for all am6xx-phycore-som boards.
The EEPROM on am6xx-phycore-soms contains information about the
configuration of the SOM. The standard configuration of the SOM
has an ospi nor, but if qspi nor is populated, the EEPROM will
indicate that change and we can use this overlay to cleanly change to
qspi nor.
Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
---
arch/arm64/boot/dts/ti/Makefile | 5 +++++
.../boot/dts/ti/k3-am6xx-phycore-qspi-nor.dtso | 15 +++++++++++++++
2 files changed, 20 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am6xx-phycore-qspi-nor.dtso
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 8d8fc8bfaf7e..f0ddda064f08 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -58,6 +58,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am6xx-phycore-disable-eth-phy.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am6xx-phycore-disable-rtc.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am6xx-phycore-disable-spi-nor.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am6xx-phycore-qspi-nor.dtbo
# Boards with AM65x SoC
k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb \
@@ -120,6 +121,8 @@ k3-am625-phyboard-lyra-disable-spi-nor-dtbs := k3-am625-phyboard-lyra-rdk.dtb \
k3-am6xx-phycore-disable-spi-nor.dtbo
k3-am625-phyboard-lyra-gpio-fan-dtbs := k3-am625-phyboard-lyra-rdk.dtb \
k3-am62x-phyboard-lyra-gpio-fan.dtbo
+k3-am625-phyboard-lyra-qspi-nor-dtbs := k3-am625-phyboard-lyra-rdk.dtb \
+ k3-am6xx-phycore-qspi-nor.dtbo
k3-am625-sk-csi2-imx219-dtbs := k3-am625-sk.dtb \
k3-am62x-sk-csi2-imx219.dtbo
k3-am625-sk-csi2-ov5640-dtbs := k3-am625-sk.dtb \
@@ -149,6 +152,8 @@ k3-am642-phyboard-electra-disable-rtc-dtbs := \
k3-am642-phyboard-electra-rdk.dtb k3-am6xx-phycore-disable-rtc.dtbo
k3-am642-phyboard-electra-disable-spi-nor-dtbs := \
k3-am642-phyboard-electra-rdk.dtb k3-am6xx-phycore-disable-spi-nor.dtbo
+k3-am642-phyboard-electra-qspi-nor-dtbs := \
+ k3-am642-phyboard-electra-rdk.dtb k3-am6xx-phycore-qspi-nor.dtbo
k3-am642-phyboard-electra-gpio-fan-dtbs := \
k3-am642-phyboard-electra-rdk.dtb k3-am642-phyboard-electra-gpio-fan.dtbo
k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \
diff --git a/arch/arm64/boot/dts/ti/k3-am6xx-phycore-qspi-nor.dtso b/arch/arm64/boot/dts/ti/k3-am6xx-phycore-qspi-nor.dtso
new file mode 100644
index 000000000000..969dfebcd637
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6xx-phycore-qspi-nor.dtso
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2024 PHYTEC America LLC
+ * Author: Nathan Morrisson <nmorrisson@phytec.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include "k3-pinctrl.h"
+
+&serial_flash {
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+};
--
2.25.1
next reply other threads:[~2024-06-21 23:32 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-21 23:31 Nathan Morrisson [this message]
2024-07-03 4:29 ` Vignesh Raghavendra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240621233143.2077941-1-nmorrisson@phytec.com \
--to=nmorrisson@phytec.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh@kernel.org \
--cc=upstream@lists.phytec.de \
--cc=vigneshr@ti.com \
--cc=w.egorov@phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®