From: Frank Wunderlich <linux@fw-web.de>
To: "Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Matthias Brugger" <matthias.bgg@gmail.com>,
"AngeloGioacchino Del Regno"
<angelogioacchino.delregno@collabora.com>,
"Rafał Miłecki" <rafal@milecki.pl>
Cc: Frank Wunderlich <frank-w@public-files.de>,
Daniel Golle <daniel@makrotopia.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Subject: [PATCH v1] arm64: dts: mediatek: mt7988: add labels for different nodes
Date: Tue, 9 Jul 2024 10:16:13 +0200 [thread overview]
Message-ID: <20240709081614.19993-1-linux@fw-web.de> (raw)
From: Frank Wunderlich <frank-w@public-files.de>
Current devicetree-nodes missing a label which allows to add aproperties
or phandles to them, so add them.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Fixes: 660c230bf302 ("arm64: dts: mediatek: mt7988: add I2C controllers")
Fixes: 09ff2216a035 ("arm64: dts: mediatek: mt7988: add PWM controller")
Fixes: 09346afaba0a ("arm64: dts: mediatek: mt7988: add XHCI controllers")
Fixes: b616b403cbff ("arm64: dts: mediatek: mt7988: add clock controllers")
Fixes: 6c1d134a103f ("arm64: dts: mediatek: Add initial MT7988A and BPI-R4")
---
arch/arm64/boot/dts/mediatek/mt7988a.dtsi | 32 +++++++++++------------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
index aa728331e876..9ced005b1595 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
@@ -14,28 +14,28 @@ cpus {
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "arm,cortex-a73";
reg = <0x0>;
device_type = "cpu";
enable-method = "psci";
};
- cpu@1 {
+ cpu1: cpu@1 {
compatible = "arm,cortex-a73";
reg = <0x1>;
device_type = "cpu";
enable-method = "psci";
};
- cpu@2 {
+ cpu2: cpu@2 {
compatible = "arm,cortex-a73";
reg = <0x2>;
device_type = "cpu";
enable-method = "psci";
};
- cpu@3 {
+ cpu3: cpu@3 {
compatible = "arm,cortex-a73";
reg = <0x3>;
device_type = "cpu";
@@ -43,7 +43,7 @@ cpu@3 {
};
};
- oscillator-40m {
+ system_clk: oscillator-40m {
compatible = "fixed-clock";
clock-frequency = <40000000>;
#clock-cells = <0>;
@@ -86,7 +86,7 @@ infracfg: clock-controller@10001000 {
#clock-cells = <1>;
};
- clock-controller@1001b000 {
+ topckgen: clock-controller@1001b000 {
compatible = "mediatek,mt7988-topckgen", "syscon";
reg = <0 0x1001b000 0 0x1000>;
#clock-cells = <1>;
@@ -99,13 +99,13 @@ watchdog: watchdog@1001c000 {
#reset-cells = <1>;
};
- clock-controller@1001e000 {
+ apmixedsys: clock-controller@1001e000 {
compatible = "mediatek,mt7988-apmixedsys";
reg = <0 0x1001e000 0 0x1000>;
#clock-cells = <1>;
};
- pwm@10048000 {
+ pwm: pwm@10048000 {
compatible = "mediatek,mt7988-pwm";
reg = <0 0x10048000 0 0x1000>;
clocks = <&infracfg CLK_INFRA_66M_PWM_BCK>,
@@ -124,7 +124,7 @@ pwm@10048000 {
status = "disabled";
};
- i2c@11003000 {
+ i2c0: i2c@11003000 {
compatible = "mediatek,mt7981-i2c";
reg = <0 0x11003000 0 0x1000>,
<0 0x10217080 0 0x80>;
@@ -137,7 +137,7 @@ i2c@11003000 {
status = "disabled";
};
- i2c@11004000 {
+ i2c1: i2c@11004000 {
compatible = "mediatek,mt7981-i2c";
reg = <0 0x11004000 0 0x1000>,
<0 0x10217100 0 0x80>;
@@ -150,7 +150,7 @@ i2c@11004000 {
status = "disabled";
};
- i2c@11005000 {
+ i2c2: i2c@11005000 {
compatible = "mediatek,mt7981-i2c";
reg = <0 0x11005000 0 0x1000>,
<0 0x10217180 0 0x80>;
@@ -163,7 +163,7 @@ i2c@11005000 {
status = "disabled";
};
- usb@11190000 {
+ ssusb0: usb@11190000 {
compatible = "mediatek,mt7988-xhci", "mediatek,mtk-xhci";
reg = <0 0x11190000 0 0x2e00>,
<0 0x11193e00 0 0x0100>;
@@ -177,7 +177,7 @@ usb@11190000 {
clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
};
- usb@11200000 {
+ ssusb1: usb@11200000 {
compatible = "mediatek,mt7988-xhci", "mediatek,mtk-xhci";
reg = <0 0x11200000 0 0x2e00>,
<0 0x11203e00 0 0x0100>;
@@ -191,21 +191,21 @@ usb@11200000 {
clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
};
- clock-controller@11f40000 {
+ xfi_pll: clock-controller@11f40000 {
compatible = "mediatek,mt7988-xfi-pll";
reg = <0 0x11f40000 0 0x1000>;
resets = <&watchdog 16>;
#clock-cells = <1>;
};
- clock-controller@15000000 {
+ ethsys: clock-controller@15000000 {
compatible = "mediatek,mt7988-ethsys", "syscon";
reg = <0 0x15000000 0 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
- clock-controller@15031000 {
+ ethwarp: clock-controller@15031000 {
compatible = "mediatek,mt7988-ethwarp";
reg = <0 0x15031000 0 0x1000>;
#clock-cells = <1>;
--
2.43.0
next reply other threads:[~2024-07-09 8:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-09 8:16 Frank Wunderlich [this message]
2024-07-22 15:14 ` AngeloGioacchino Del Regno
2024-07-22 15:28 ` Frank Wunderlich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240709081614.19993-1-linux@fw-web.de \
--to=linux@fw-web.de \
--cc=angelogioacchino.delregno@collabora.com \
--cc=conor+dt@kernel.org \
--cc=daniel@makrotopia.org \
--cc=devicetree@vger.kernel.org \
--cc=frank-w@public-files.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=rafal@milecki.pl \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®