From: Rayyan Ansari <rayyan.ansari@linaro.org>
To: linux-arm-msm@vger.kernel.org
Cc: Rayyan Ansari <rayyan.ansari@linaro.org>,
Bjorn Andersson <andersson@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
devicetree@vger.kernel.org,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
linux-kernel@vger.kernel.org, Rob Herring <robh@kernel.org>
Subject: [PATCH 3/3] ARM: dts: qcom: ipq4019: adhere to pinctrl dtschema
Date: Wed, 10 Jul 2024 09:41:11 +0100 [thread overview]
Message-ID: <20240710084250.11342-4-rayyan.ansari@linaro.org> (raw)
In-Reply-To: <20240710084250.11342-1-rayyan.ansari@linaro.org>
Pass dt_binding_check for qcom,ipq4019-pinctrl.yaml.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
---
.../boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi | 34 ++++++++-----------
.../boot/dts/qcom/qcom-ipq4018-jalapeno.dts | 27 ++++++---------
.../boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi | 26 +++++---------
.../boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi | 14 ++++----
.../dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts | 8 ++---
.../dts/qcom/qcom-ipq4019-ap.dk07.1-c2.dts | 2 +-
.../boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi | 6 ++--
7 files changed, 50 insertions(+), 67 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi
index da67d55fa557..0d23c03fae33 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi
@@ -28,46 +28,42 @@ key-reset {
};
&tlmm {
- i2c0_pins: i2c0_pinmux {
- mux_i2c {
- function = "blsp_i2c0";
- pins = "gpio58", "gpio59";
- drive-strength = <16>;
- bias-disable;
- };
+ i2c0_pins: i2c0-state {
+ function = "blsp_i2c0";
+ pins = "gpio58", "gpio59";
+ drive-strength = <16>;
+ bias-disable;
};
- mdio_pins: mdio_pinmux {
- mux_mdio {
+ mdio_pins: mdio-state {
+ mdio-pins {
pins = "gpio53";
function = "mdio";
bias-pull-up;
};
- mux_mdc {
+ mdc-pins {
pins = "gpio52";
function = "mdc";
bias-pull-up;
};
};
- serial0_pins: serial0_pinmux {
- mux_uart {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
+ serial0_pins: serial0-state {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
};
- spi0_pins: spi0_pinmux {
- mux_spi {
+ spi0_pins: spi0-state {
+ spi0-pins {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
- mux_cs {
+ spi0-cs-pins {
function = "gpio";
pins = "gpio54", "gpio4";
drive-strength = <2>;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts b/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts
index 365fbac417fd..ac3b30072a22 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts
@@ -11,40 +11,35 @@ / {
};
&tlmm {
- mdio_pins: mdio_pinmux {
- pinmux_1 {
+ mdio_pins: mdio-state {
+ mdio-pins {
pins = "gpio53";
function = "mdio";
+ bias-pull-up;
};
- pinmux_2 {
+ mdc-pins {
pins = "gpio52";
function = "mdc";
- };
-
- pinconf {
- pins = "gpio52", "gpio53";
bias-pull-up;
};
};
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
+ serial_pins: serial-state{
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
};
- spi_0_pins: spi_0_pinmux {
- pin {
+ spi_0_pins: spi-0-state {
+ spi0-pins {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <2>;
bias-disable;
};
- pin_cs {
+ spi0-cs-pins {
function = "gpio";
pins = "gpio54", "gpio59";
drive-strength = <2>;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
index f7ac8f9d0b6f..efbe89dd4793 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
@@ -34,30 +34,22 @@ &prng {
};
&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
+ serial_pins: serial-state {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
};
- spi_0_pins: spi_0_pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- };
- pinmux_cs {
- function = "gpio";
- pins = "gpio54";
- };
- pinconf {
+ spi_0_pins: spi-0-state {
+ spi0-pins {
pins = "gpio55", "gpio56", "gpio57";
+ function = "blsp_spi0";
drive-strength = <12>;
bias-disable;
};
- pinconf_cs {
+ spi0-cs-pins {
pins = "gpio54";
+ function = "gpio";
drive-strength = <2>;
bias-disable;
output-high;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
index 374af6dd360a..91e296d2ea82 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
@@ -24,26 +24,26 @@ memory {
soc {
pinctrl@1000000 {
- serial_0_pins: serial0-pinmux {
+ serial_0_pins: serial0-state {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
- serial_1_pins: serial1-pinmux {
+ serial_1_pins: serial1-state {
pins = "gpio8", "gpio9",
"gpio10", "gpio11";
function = "blsp_uart1";
bias-disable;
};
- spi_0_pins: spi-0-pinmux {
- pinmux {
+ spi_0_pins: spi-0-state {
+ spi0-pins {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
bias-disable;
};
- pinmux_cs {
+ spi0-cs-pins {
function = "gpio";
pins = "gpio12";
bias-disable;
@@ -51,13 +51,13 @@ pinmux_cs {
};
};
- i2c_0_pins: i2c-0-pinmux {
+ i2c_0_pins: i2c-0-state {
pins = "gpio20", "gpio21";
function = "blsp_i2c0";
bias-disable;
};
- nand_pins: nand-pins {
+ nand_pins: nand-state {
pins = "gpio53", "gpio55", "gpio56",
"gpio57", "gpio58", "gpio59",
"gpio60", "gpio62", "gpio63",
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts
index ea2987fcbff8..41c5874f6f97 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts
@@ -19,20 +19,20 @@ spi@78b6000 {
};
pinctrl@1000000 {
- serial_1_pins: serial1-pinmux {
+ serial_1_pins: serial1-state {
pins = "gpio8", "gpio9",
"gpio10", "gpio11";
function = "blsp_uart1";
bias-disable;
};
- spi_0_pins: spi-0-pinmux {
- pinmux {
+ spi_0_pins: spi-0-state {
+ spi0-pins {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
bias-disable;
};
- pinmux_cs {
+ spio-cs-pins {
function = "gpio";
pins = "gpio12";
bias-disable;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c2.dts b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c2.dts
index bd3553dd2070..67ee99d69757 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c2.dts
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c2.dts
@@ -9,7 +9,7 @@ / {
soc {
pinctrl@1000000 {
- serial_1_pins: serial1-pinmux {
+ serial_1_pins: serial1-state {
pins = "gpio8", "gpio9";
function = "blsp_uart1";
bias-disable;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi
index 7ef635997efa..cc88cf5f0d9b 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi
@@ -24,19 +24,19 @@ chosen {
soc {
pinctrl@1000000 {
- serial_0_pins: serial0-pinmux {
+ serial_0_pins: serial0-state {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
- i2c_0_pins: i2c-0-pinmux {
+ i2c_0_pins: i2c-0-state {
pins = "gpio20", "gpio21";
function = "blsp_i2c0";
bias-disable;
};
- nand_pins: nand-pins {
+ nand_pins: nand-state {
pins = "gpio53", "gpio55", "gpio56",
"gpio57", "gpio58", "gpio59",
"gpio60", "gpio62", "gpio63",
--
2.45.2
next prev parent reply other threads:[~2024-07-10 8:44 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-10 8:41 [PATCH 0/3] ARM: dts: qcom: adhere to pinctrl dt schema Rayyan Ansari
2024-07-10 8:41 ` [PATCH 1/3] ARM: dts: qcom: apq8064: adhere to pinctrl dtschema Rayyan Ansari
2024-07-10 9:43 ` Krzysztof Kozlowski
2024-07-10 8:41 ` [PATCH 2/3] ARM: dts: qcom: ipq8064: " Rayyan Ansari
2024-07-10 9:44 ` Krzysztof Kozlowski
2024-07-10 8:41 ` Rayyan Ansari [this message]
2024-07-10 9:45 ` [PATCH 3/3] ARM: dts: qcom: ipq4019: " Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240710084250.11342-4-rayyan.ansari@linaro.org \
--to=rayyan.ansari@linaro.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®