[PATCH 2/6] drivers/thermal/exynos: use tmu_temp_mask consistently

[Mateusz Majewski <m.majewski2@samsung.com>]

Some of the usages in sanitize_temp_error were missed, probably because
the boards being used never actually exceeded 255 in their trimming
information. This is needed for Exynos 850 support, which uses 9-bit
temperature codes.

Signed-off-by: Mateusz Majewski <m.majewski2@samsung.com>
---
 drivers/thermal/samsung/exynos_tmu.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 9b7ca93a72f1..61606a9b9a00 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -237,17 +237,17 @@ static void sanitize_temp_error(struct exynos_tmu_data *data, u32 trim_info)
 
 	data->temp_error1 = trim_info & tmu_temp_mask;
 	data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) &
-				EXYNOS_TMU_TEMP_MASK);
+				tmu_temp_mask);
 
 	if (!data->temp_error1 ||
 	    (data->min_efuse_value > data->temp_error1) ||
 	    (data->temp_error1 > data->max_efuse_value))
-		data->temp_error1 = data->efuse_value & EXYNOS_TMU_TEMP_MASK;
+		data->temp_error1 = data->efuse_value & tmu_temp_mask;
 
 	if (!data->temp_error2)
 		data->temp_error2 =
 			(data->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) &
-			EXYNOS_TMU_TEMP_MASK;
+			tmu_temp_mask;
 }
 
 static int exynos_tmu_initialize(struct platform_device *pdev)
-- 
2.45.1