From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from gloria.sntech.de (gloria.sntech.de [185.11.138.130]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 22A801F5FA for ; Sun, 21 Jul 2024 17:37:32 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.11.138.130 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1721583456; cv=none; b=KT3M98AtxeW6OeQSyceTTft57x7r8CasZLGqIUnbeRzmFnA+cCR6/NBwRzcQmPnieq39G2+qrd3uoYV4Rv03K9v2/HQ4XABOoHVfcOEuS/52WhwOJhSd5CIEtSKRHbjDXiENjmFPS8dAcfEFpSV/wL5SC/cqIg6pvoBoVdlzv6s= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1721583456; c=relaxed/simple; bh=riDZDNsvY+1BD0rRSouZFECLzSj7ycSOiImML3n43uA=; h=From:To:Cc:Subject:Date:Message-Id:MIME-Version; b=akV1LrB6/RuCt0uFTNw2nr/Swm6iqi+GlkvXtxxF1cUmp9635KNCMy16rW1hSPtRckQB/6eFtzHQ2Oha3tql5dmGgkP1fpMWOs3eTT07bxte9HO6OyaAFqV/vheCKkyceG0zyNdMAcYgoxPDYoTl4gujLnFnJm/lp2UcqSlftKM= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de; spf=pass smtp.mailfrom=sntech.de; arc=none smtp.client-ip=185.11.138.130 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=sntech.de Received: from i5e860cd3.versanet.de ([94.134.12.211] helo=phil.lan) by gloria.sntech.de with esmtpsa (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1sVaUz-00075D-7P; Sun, 21 Jul 2024 19:37:29 +0200 From: Heiko Stuebner To: heiko@sntech.de Cc: ukleinek@debian.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 00/14] Expand available features on Qnap TS433 Date: Sun, 21 Jul 2024 19:37:09 +0200 Message-Id: <20240721173723.919961-1-heiko@sntech.de> X-Mailer: git-send-email 2.39.2 Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Thanks to the nicely supported rk3568, the hardest part for adding things, is to pull things from the vendor-kernel and translating them to mainline standards. This series allows the TS433 to use all 4 bays [0], wiggle some LEDs and access devices connected to all 3 usb ports. The device runs stable now and might be usable for actual usage. There is still a todo-list though: - the ethernet mac address for the realtek chip seems correct, but the gmac0 interface currently uses a wrong one - i2cdetect reports devices on i2c-1 on addresses 54,55,56,57 model_Q0B20_Q0B30_10_10.conf from the original rescue image labels them VPD_MB = I2C:0x54, VPD_BP = I2C:0x56 the meaning currently being unknown. Some eeprom maybe? - The regulator tree is slightly dubious. Everthing seems to follow rk3568 reference designs, but especially the regulator labeled vcc3v3_sd seems to supply some PCIe functionality. So I guess the device's schematics will look quite different than the regulators added to the vendor devicetree. - Quite a bit of functionality is provided by the MCU connected to uart0. According to the model.conf there should be fan-control, a number of additional LEDs (status,locate,usb?) Thanks to Qnap engineers adding an easily accessible header for maskrom mode on the board, replacing the bootloader is also quite a breeze. A branch on top of today's u-boot master branch can be found on [1]. I'll submit that code to u-boot once I can cherry-pick the dts patches. changes in v2: - add patches for tsadc, gpio-keys, cpu-supply, pmic, gpu and io-domains [0] I only have two drives right now, but I tested both the internal sata connector as well as the PCIe connected sata controller in different combinations. [1] https://github.com/mmind/u-boot-rockchip/tree/dev/qnap-ts433/v2024.07 Heiko Stuebner (14): arm64: dts: rockchip: add PCIe supply regulator to Qnap-TS433 arm64: dts: rockchip: enable second PCIe controller on the Qnap-TS433 arm64: dts: rockchip: enable uart0 on Qnap-TS433 arm64: dts: rockchip: enable usb ports on Qnap-TS433 arm64: dts: rockchip: add stdout path on Qnap-TS433 arm64: dts: rockchip: enable sata1+2 on Qnap-TS433 arm64: dts: rockchip: add board-aliases for Qnap-TS433 arm64: dts: rockchip: add hdd leds to Qnap-TS433 arm64: dts: rockchip: enable the tsadc on the Qnap-TS433 arm64: dts: rockchip: add gpio-keys to Qnap-TS433 arm64: dts: rockchip: define cpu-supply on the Qnap-TS433 arm64: dts: rockchip: add missing pmic information on Qnap-TS433 arm64: dts: rockchip: enable gpu on Qnap-TS433 arm64: dts: rockchip: add 2 pmu_io_domain supplies for Qnap-TS433 .../boot/dts/rockchip/rk3568-qnap-ts433.dts | 539 +++++++++++++++++- 1 file changed, 536 insertions(+), 3 deletions(-) -- 2.39.2