From: Heiko Stuebner <heiko@sntech.de>
To: heiko@sntech.de
Cc: ukleinek@debian.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 11/14] arm64: dts: rockchip: define cpu-supply on the Qnap-TS433
Date: Tue, 23 Jul 2024 21:55:35 +0200 [thread overview]
Message-ID: <20240723195538.1133436-12-heiko@sntech.de> (raw)
In-Reply-To: <20240723195538.1133436-1-heiko@sntech.de>
The TS433 seems to use a silergy,syr827 regulator for the cpu supply.
At least that is the compatible used in the vendor devicetree, though
it could very well also be another fan53555 clone.
Define the needed regulator node and hook up the cpu-supply to the
cpu cores.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
.../boot/dts/rockchip/rk3568-qnap-ts433.dts | 41 +++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
index 9f964b6f411c9..4bccefc0537ed 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
@@ -130,6 +130,16 @@ vcc5v0_otg: regulator-vcc5v0-otg {
vin-supply = <&vcc5v0_usb>;
};
+ vcc5v0_sys: regulator-vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
vcc5v0_usb: regulator-vcc5v0-usb {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_usb";
@@ -156,6 +166,22 @@ &combphy2 {
status = "okay";
};
+&cpu0 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_cpu>;
+};
+
&gmac0 {
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
@@ -175,12 +201,27 @@ &gmac0_rgmii_clk
};
&i2c0 {
+ status = "okay";
+
pmic@20 {
compatible = "rockchip,rk809";
reg = <0x20>;
interrupt-parent = <&gpio0>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
};
+
+ vdd_cpu: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1390000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+ };
};
&i2c1 {
--
2.39.2
next prev parent reply other threads:[~2024-07-23 19:56 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-23 19:55 [PATCH v3 00/14] Expand available features on Qnap TS433 Heiko Stuebner
2024-07-23 19:55 ` [PATCH v3 01/14] arm64: dts: rockchip: add PCIe supply regulator to Qnap-TS433 Heiko Stuebner
2024-07-23 19:55 ` [PATCH v3 02/14] arm64: dts: rockchip: enable second PCIe controller on the Qnap-TS433 Heiko Stuebner
2024-07-23 19:55 ` [PATCH v3 03/14] arm64: dts: rockchip: enable uart0 on Qnap-TS433 Heiko Stuebner
2024-07-23 19:55 ` [PATCH v3 04/14] arm64: dts: rockchip: enable usb ports " Heiko Stuebner
2024-07-23 19:55 ` [PATCH v3 05/14] arm64: dts: rockchip: add stdout path " Heiko Stuebner
2024-07-23 19:55 ` [PATCH v3 06/14] arm64: dts: rockchip: enable sata1+2 " Heiko Stuebner
2024-07-23 19:55 ` [PATCH v3 07/14] arm64: dts: rockchip: add board-aliases for Qnap-TS433 Heiko Stuebner
2024-07-23 19:55 ` [PATCH v3 08/14] arm64: dts: rockchip: add hdd leds to Qnap-TS433 Heiko Stuebner
2024-07-23 19:55 ` [PATCH v3 09/14] arm64: dts: rockchip: enable the tsadc on the Qnap-TS433 Heiko Stuebner
2024-07-23 19:55 ` [PATCH v3 10/14] arm64: dts: rockchip: add gpio-keys to Qnap-TS433 Heiko Stuebner
2024-07-23 19:55 ` Heiko Stuebner [this message]
2024-07-23 19:55 ` [PATCH v3 12/14] arm64: dts: rockchip: add missing pmic information on Qnap-TS433 Heiko Stuebner
2024-07-23 19:55 ` [PATCH v3 13/14] arm64: dts: rockchip: enable gpu " Heiko Stuebner
2024-07-23 19:55 ` [PATCH v3 14/14] arm64: dts: rockchip: add 2 pmu_io_domain supplies for Qnap-TS433 Heiko Stuebner
2024-07-25 22:20 ` [PATCH v3 00/14] Expand available features on Qnap TS433 Rob Herring (Arm)
2024-07-30 7:32 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240723195538.1133436-12-heiko@sntech.de \
--to=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=ukleinek@debian.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®